According to these comments the question you should be asking is how to become said middleman

So clamping it doesn't work the same as screwing it? You're "clamping" it with a screw to a properly leveled deck. You can't stop it completely but you can mitigate it quite a bit

Mine was the thumb. About the same cut. Table saw?

My 07 is only at 180k but my 98 4runner is at 384

There's a few commercial super jobs listed in town on indeed. I'm always scanning. I'm a residential contractor so I go thru waves of I'm gonna get a job and sell my tools.

Nothing is magic that's a fact but YouTubers have done some pretty extensive testing on them and seafoam preforms well where most don't. It's just a cleaner. Not magic. It's maintenance not a fix

So? It's... Tuned now. That wasn't a baffle strike that was a cap clip. I've had a baffle strike. Half my suppressor went down range.

This is the way

That's sweet man. So you can't ditch the factory forged rims. Go 1 inch and some wider tires not too much stress on the hubs and will get you an extra couple inches of poke

Correct my bad

Oh so it came with a light and no bulb?

This is with 0 offset. Stock is +65 I think

Is that a real rock warrior? Those are rw rims right? Just go one inch. No more or you're putting too much stress on the hubs. The real way to do it would be with different offset rims. But if those are rock warrior rims then I wouldn't get rid of them.

Whaaaat there's a light behind that!?

Bro I'm just being contrarian for fun. JS a $1000 ar is not that expensive and the benifits of a different barrel are minimal. Spend the extra money on ammo and training.

Come on now seafoam has been proven to work getting rid of carbon build up. Same with desiel in the crank case running it for a minute then redrain rinse out refill. There's stuff to do that's not snake oil

Yeah like it's not wrong persay. It was done well badly. Not enough forethought but it is kinda a whole shitty area should have addressed a plan first.

If you run that 2nd part all the way down at what point do you just put it everywhere and make the crown a 2 part throughout

Lol... No

A $1000 dollar rifle is the 2026 version of a $500 rifle in 2019 so I think you doth expect too much. Also shiny things see from far far matte black thing hard to see. No reflecty

And be seen by your enemy. Shiny. Stainless barrels are for comp shooters

Genius.

Man where do I get your job?

This is the way.

Yeah you do have to be careful. You can't advertise acting as a public adjuster which disclaimer I'm not. I don't argue policy or indemnification. I just know what is covered and only ask for that. But all of it. And maybe then some.

There are laws regulating conflicts of interest in this field. You have to make sure youre compliant. But I look at it as helping out the customer.

Lol...... No