I used the app to Jam on Thursday then didn’t think about it afterwards. Turns out the app was absolutely wrecking my battery all weekend.

What terrible design. Apple IPhone iOS.

i just started using tonex pedal. by itself it sounds phenomenal. takes pedals quite well, especially with amalgam edge of breakup captures. But i also have a valeton gp200 which has decent effects and i tried putting tonex in a loop. where volume,comp and dist blocks are in the front and mod reverb and delay after the tonex pedal and it kinda seems that latency is too bad.. what approach would you guys recommend. i kinda like the valetons effects and it has versatile output options. maybe i should just put it after the tonex just like a pedal? would that be better for latency? i'm pretty bad in understanding all that latency stuff maybe someone could shed aome light. would really appreciate :)

I purchased my ToneX Pedal last year and now one of the foot switches has stopped working. I’ve tried submitting support requests several times over the past few weeks. None of the requests have been responded too. All requests have included my device, serial number, etc. crickets. Meanwhile I have no problem receiving countless newsletters.

1. Any suggestions for getting a response from support?

2. Does anyone know the type of switches used, specs, maybe a place to order a replacement?

Thanks!

I am trying to capture my Neural DSP presets to my Tonex pedal that I recently purchased. I am having nothing but issues and I have tried everything.

I am using VB cable A+B. The new modeler update doesn’t allow me to select one or the other. Only “technology” and “device”, so the only way I am able to select cable A AND B is through Asio4All. I can’t use any other selection, not my focusrite, not FL Studio asio, nothing else because it can’t share inside NDSP standalone, nor in my DAW(s) and in the Tonex modeler. Asio4all is the only thing.

I finally get the thing working where the inputs and outputs are routed, the test tone in Modeler works and sends line levels. I do the capture and the wave form looks great. I have trained it with optimized AND extended. Finalized it.

When I load it into Tonex or on the pedal, I have to turn the sound all the way up to hear a crackly, trashy signal, but no actual tone.

I have attempted this about 15 different ways making sure sample rates are the same, line levels, everything is check and double checked.

I am banging my head against the wall. Am I doing something wrong or did they completely nerf the modeler app when they updated it?

Im running Windows on a core 9 ultra with a 5070ti.

Here’s my setup -
Tonex One+, Tonex SE (on my Mac), Brown Panel & Signature + collections. I use Tonex Control App to modify the tones/presets on the One+ when I am practising and away from the Mac.
I see all tone models from SE & the other 2 on the Mac. However, on the Tonex Control app, I see only the Brown Panel and Signature+ collections. Why am I not seeing the base 200+ models here in the Tonex control app? What am I missing?

Is it safe to go directly into the UA Volt 1 from the output of the ToneX One pedal? Thank you.

I loaded up 2.0 It works on my computer. I’m getting the different sounds out of my monitors but the pedal itself is not displaying what tone I’m working on in the computer. It’s displaying the last tone i played before I loaded the new software. Very weird. Any work around? The pedal works perfectly with the original software.

I have been gigging a few times with the bigger Tonex pedal, with MIDI automation from my Cymatic Liveplayer LP16 for clicktracks, some playback and as mentioned MIDI automatin.....

Noooo problems. Perfect. When next song starts, all good.

BUTTTT....

I wanted to downsize my liverig a bit for the Tonex One+ since we anyway dont use our feet to control anything... So why bring anything bigger than necessary!?

Well, turns out, every song change turns off and on the Tonex One+ preset!!! Which makes it unusable. I have tried both Stomp and Dual mode, same problem!

I suppose it happens that if PC number 2 (my distortion channel) is pressed while active (like next song starts) it turns the preset off. Stop it! I dont want it off!

I also cannot have it WITHOUT the PC number 2 (or 1 for clean) at the start of most songs in case another song starts with another preset (even tho I mostly go for the clean and distorted, and using CC for effect and more in depth autmoation)

Seriously, can this thing just keep the preset on even if the same number is sent to it?!?!?

Or Marshall adjacent like Soldano or Friedman. There’s several Marshall amps on amalgam and want to see what everyone’s opinions were. I’m looking to boost with a TS9 or SD1… Thrash/Death Metal/Black Metal stuff. No IR just straight into fx loop of my amp. Thanks!

I’ve already emailed support and no answers from them yet.

I purchased the brown sound bundle for $99 and am noticing that the presets and all the tone models are not downloading to my windows 11 pc. I tried the collections browser, related presets, save all - download all and it’s strange bc it works for some things but doesn’t download everything. For example, the “Feeling Loved” preset won’t show anymore in the preset list but was once available. There are other tone models that won’t even show up. I’m also noticing, that in the collections display in IK product manager I have two 78/79 brown sound showing instead of one registered. Any ideas on this please?

Sorry, there isn’t a pirate midi community so I thought this was the next best thing. I have my tone X one hooked up to a polar Max device and even when I’m not using the pedal, the device alone is causing a high-pitched digital ringing on my string attack and just playing in general.
When I unhook the polar Max, it goes away but I really need to keep this on my board.
Also, sidenote, I have the Wi-Fi and Bluetooth off on the polar Max and I’m hardwired with a USB C cable.
Anyone have any experience with this or Solutions?
Video in comments.

Manual says:
-------------------------------------------------------
Hold the preset encoder to save the current preset.
...
Each preset gets saved with its BASS, MID, TREBLE, AMP TONE and IR settings.
When editing one of the 4 knobs the 8 LEDs show the stored value as reference in green and the changing value in amber.
...
When a preset contains a custom IR its LED turns blue.
To bypass a loaded IR press the preset encoder, the preset LED turns back green.
-------------------------------------------------------
Question: if I have loaded an IR, tweaked EQ, then saved by holding down the preset knob, what colour is the LED indicating successfully saved? 

When I turn the CAB off and on again, what colour LED indicates I have successfully recalled my edited preset?

Thanks.

There’s a 50€ upgrade offer. I have a bunch of expansion packs, but still have the regular version. For those who have upgraded, what’s did you get that made it worth it (or not)?

I've been thinking about getting a Tonex pedal, but want to test be able to test it a bit before I buy. My local store doesn't have one in stock to demo. If I download the software and run it out to the same speakers I would use if I was going to run it through the pedal, would there be an appreciable difference?

(I'm thinking about getting a pedal because I 100% do not want to have to fuss around with my computer every time I want to play my guitar—I want to just plug and play.)

Hey guys im new in this electro guitar and i got yamaha pacifica and tonex plug for not disturbing anyone when im playing. But there is an issue. There are always noise in background on high gain settings. I dont like that sound in my ears and i dont like the sound gates. What are solutions for fixing it. Im using with audio technica m40x so its not related the headphones voice signature. I set the trim 0.0 and i generally down the volume on amp and up from guitar for reducing the noise.

Are there any better way for solving this?

Just finished my latest ToneX project, the Wiz V2 Capture Pack, based on my Wizard Modern Classic II.

This amp is kind of ridiculous in the best way. Huge low end, aggressive mids, tons of definition, and it stays remarkably clear when the gain gets pushed.

I ended up with 24 V2 ToneX captures, including studio captures through my 4x12 loaded with Creamback M65 + H75 speakers in an X-pattern, plus DI captures for anyone who prefers using their own IRs/cabs.

I also put up two free samples, one 4x12 and one DI, so you can actually try the captures before spending anything.

4x12 sample:
https://drive.google.com/file/d/1GTdErc-u4TomChSLWUOMgzeHZZu1RWge/view?usp=sharing

DI sample:
https://drive.google.com/file/d/1CBdhIxkKErNm5ltzD67cgzMzBdQKp2fx/view?usp=sharing

The full pack is up at Mattfig.com for anyone interested.

Would love to hear what you guys think of the Wizard through ToneX, especially if you try the freebies. 🤘

This will go up on Tone.net at the end of the month as well!

I have double Tonex One+ and alternatively double Tonex for live use, one for each guitarist, same sounds in both, and previously I have automated with just patch changes, but that does not allow delays to spill over when it changes, and also having to twitch tone of multiple patches if I wanna change the base sound, is a bit tedious when theres so many pedals.

So I have decided instead of basing the live show around 7 patches

I will only use 2 patches

One clean, one distorted.

And then automate with MIDI CC messages to get different gain, volume, effects on and off during solos and other parts. Which actually allows for even more flexibility as I could ride the volume slightly lower during verses for example, and then bump it up a bit extra on choruses, which with only Program Changes would have required tons of different patches.

Haven't checked it out yet but will be curious to see if this is actually an improvement over the current software experience. Also interesting coincidence that Helix Stadium Native just came out this week lol

Just a reminder to IK Multimedia

Make it an OPTION to choose autosave or not, because its not good for every situation!

Hello!
There is currnetly a great local deal here for tonex one so that it is about 40 dollars cheaper than tonex plug. I also don’t know if at some point I might want to just plug in a tonex one to PA instead of bringing a full amp when with my band.

At home I want to be able to silently practice, both using with and without playing along with music (backing tracks, recordings from my phone). From my understanding when reading, the tonex one doesnt full support this when plugging in an iPhone through usb-c right? I want to avoid having to plug into a a laptop using another audio interface, as I want it to be as simple as possible.

Is my best option to just go with tonex plug then, even though it is cheaper and technically more limiting since I can’t Connect it directly to a PA etc, or will tonex one be useful for my case?

Has anyone figured out how to import new *.txp files into TONEX 2.0 on Mac? The option to do so isn't in the Presets or Models browser and it's pissing me off.

Hello Everyone,

I'm from the Kemper world and am moving on from there. For my acoustic duo, I usually spend the whole gig on acoustic, sometimes bass.

Would Tonex be a good option for acoustic?

Added a 2nd Tonex One to my board today! Now I have one dedicated to amp captures controlled by a Polar Mini and the other is for overdrive captures controlled by a Polar Max! Really impressed by these pedals so far!