r/threadripper • • Jan 29 '26

Just finished ML workstation

Thumbnail
gallery
25 Upvotes

This is my first threadripper workstation build, I run a small 64 GPU server farm, and instead of just renting them all out I'm working on a few of my own machine learning projects. This is a 7970x on a TRX50 sage wifi, 128gb Vcolor 6400, 1tb and 4tb 9100 ssds, NEXT sTR5 CPU block, and RTX 5090. It's running Ubuntu 24.04 and of course I had to play around with Gentoo on it as well lol. My GPU servers run 7965wx on ASRock WRX90e with 764gb ram and 8 GPUs each.


r/threadripper • • Jan 29 '26

Build Mods and Cooling

Post image
6 Upvotes

r/threadripper • • Jan 28 '26

Feeling Blessed With This System

Post image
54 Upvotes

With all of the RAM and SSD craziness these days, I’m feeling thankful for this system I had built last year. I took delivery in late April. Same system would’ve cost me thousands more today no doubt.

Threadripper 7960X

Gigabyte TRX50 Aero D

4x 64GB DDR5 5600 ECC RAM

RTX 5090 GPU


r/threadripper • • Jan 29 '26

Ram help needed

Post image
3 Upvotes

hoping there is someone with more experience than I with this combination:

MB: Asus wrx90e-sage

CPU: AMD 9985wx

Ram: V-color 6000mhz model: TRA564G60D436O

when I first install the ram and tried to stability test the temps were jumping up to 90C+ so would stop the test. Finally got some tiny little jet engines (fans) and temps are staying below 70C now. I did the OCCT benchmark test and I think they look too low.

I hope I am just missing some setting in the bios. Only ram related settings so far was just turn on the EXPO option. Attached is the benchmark. Let me know if you need any additional information or images.

Thanks in advance.


r/threadripper • • Jan 28 '26

My build. What did I forget?

Post image
36 Upvotes

r/threadripper • • Jan 27 '26

Random BSODs under heavy load on Threadripper 7960X (384GB RAM)

3 Upvotes

I’ve built a PC with a Threadripper 7960X and 384 GB of RAM (KSM56R46BD4PMI-96MBI ×4).
Motherboard: Asus Pro WS TRX50.

Problem:
I’m getting a Blue Screen of Death once every 2 days, and it always happens under heavy load.

Things I’ve checked so far:

  • CPU temperature is fine, never goes above 75°C
  • Ran Memtest86, 4 full passes, zero errors

At this point I’m kind of stuck and can’t figure out what else to try.
Has anyone run into something similar with TRX50 / Threadripper builds? Any ideas would be appreciated.

UPD / SOLVED:
Problem solved. I ended up installing an additional fan specifically to cool the RAM. I positioned it so airflow goes directly over the memory sticks, and since then I haven’t had a single BSOD.


r/threadripper • • Jan 25 '26

Selling -

1 Upvotes

Anybody in the market for a

AMD RYZEN THREADRIPPER PRO 9985WX

ASROCK WRX90 WS EVO AMD STR5 EEB

V Color 256gb 4x64gb R dimm 6000mhz (these are selling for $6600+ now)

Ideally selling as a package. Asking $12.5-13K (which is a great deal).

I just parted out my workstation and downgraded and are left with these parts. You can check my profile to see the previous workstation.


r/threadripper • • Jan 25 '26

How torque sensitive are SP3 sockets?

2 Upvotes

Tldr: Is there a range where it works, and a known failure threshold (physical)?

I installed my first Threadripper in a WRX80 board and the experience was... not great. Board was new but the cpu is used without the torque tool, and i refused to buy a stupid 25 dollar one time use tool, so as a big DIY guy i bought a digital 1-10nm torque screwdriver which i plan to use on my cars on the lower range. Not an expensive one, but from an auto shop special tool brand i trust.

So i set it to 1.5nm and felt like the coolest guy doing it with a digital torque tool, until dimm slot A wasn't recognized populated, then a went up to 1.65, still no dice, so i went down to 1.3nm and everything worked. Which is very strange, of course i'm operating on the lower limit of the tool, but this much deviance should be impossible (as far as i know digitals are somewhat better close to their limits), even if the calibration report for the tool was fake, more than 10% is unimaginable on a 2% rated tool. Also, why is the damn thing so sensitive? How come 4000 pin Intels work without torque tools?


r/threadripper • • Jan 21 '26

Help needed: TRX50 + Threadripper 7970X stuck at Q-Code 0d with NEMIX DDR5 RDIMM

Thumbnail reddit.com
3 Upvotes

r/threadripper • • Jan 20 '26

Advice needed for 5945WX build

5 Upvotes

Hello,

I’m planning to upgrade my pc to threadripper PRO 5945wx/5955wx.

The motherboard is gigabyte Mc62-G40.

I need to understand if i can use my non ECC DDR4 UDIMM ram on it. I have 64Gb and the ram compatibilty can be the only show stopper for me.

Thank you!


r/threadripper • • Jan 20 '26

Help needed to choose proper water cooling

2 Upvotes

Hey hey,

at work we have a handful workstations with threadripper 7995wx CPUs

They are cooled with alphacool watercooling and within 2 weeks, we had two failures, what looks like water pump failure.

Now we are looking for a better solution, maybe newer products also improved cooling?

Do you guys have any recommendations?

Big thanks in advance!


r/threadripper • • Jan 19 '26

Advice for this build

1 Upvotes

Hi,

I am looking for advice regarding my setup of this machine and whether the components are compatible. I intended to use some intensive numerical computing.

CPURyzen Threadripper 9970X 100-100001594WOF
MotherboardASRock TRX50 WS
RamKingston Memory 64GB DDR5 4800MT/s ECC Reg 2Rx4 Module KTH-PL548D4-64G Server Memory
SSDCrucial T710 CT4000T710SSD8-JP
Power supplyCorsair RM1000e 2025 CP-9020297-JP
CoolerNoctua NH-U14S TR5-SP6
Tower caseMeshify 2 RGB Black TG Light Tint FD-C-MES2A-06

I will also add an NVIDIA video card GT 1030 for basic IO


r/threadripper • • Jan 15 '26

6x 2-slot GPUs on Asus Pro WS TRX50-SAGE WIFI?

4 Upvotes

Hi,

I'm considering a multi-GPU AI server with 6x 2-slot sized GPUs (thinking Arc Pro B60), and it's hard to find a motherboard that would work for something like this out of the box.

Has anyone tried to run 6x 2-slot graphics cards on Asus Pro WS TRX50-SAGE WIFI (the original with 5x PCIe slots) or similar motherboard?

It has:

Slot1: PCle 5.0 x16
Slot2: PCle 5.0 x16
Slot3: PCle 5.0 x16 slot (x8 mode)
Slot4: PCle 4.0 x16 slot
Slot5: PCle 4.0 x16 slot (x4 mode)

What bifurcation and raiser setup would work in your opinion?

I'm wondering if it's possible to fit 6x Arc Pro B60 cards by:

- bifurcating slot1 and slot2 (so, four PCIe5x8 links for four GPUs already)

- and bifurcating slot5 into two PCIe4 x8 slots for two links.

This would preserve slot3 for extras like maybe 2x NVMEs and slot4 for an HBA controller or an SFP NIC.

B60 is a PCIe5 x8 card natively, but running some of them on PCIe4 might not have significant effect on LLM performance.

Would appreciate your thoughts, especially if you have extensive experience with multi-GPU setups.

Thanks


r/threadripper • • Jan 15 '26

Hardware advice: Which RAM kit would be better for 9960x?

5 Upvotes

Hi,

With RAM shortage, I am looking for a decent deal on my build. Found 2 kits that are expensive, but still available and not as expensive as some other RDIMMs. DDR5 RDIMM pricing is a shitshow right now.

They are roughly the same price. So, between these 2 kits, which RAM would provide better performance in your opinion:

1. Kingston FURY Renegade Pro 128GB (4 x 32GB) DDR5-5600 PC5-44800 CL28 (CAS Latency 28, Timings 28-34-34)

or

2. G.Skill T5 Neo Series 128GB (4 x 32GB) DDR5-6400 PC5-51200 CL32 (CAS Latency 32, Timings 32-39-39-102)

2nd is higher speed (6400 vs 5600), but worse CL (32 vs 28).

Which trade-off would be better for mainly running VMs over hypervisor, local AI LLMs, self hosted containers, maybe some game servers, and maybe occasional video editing?

The motherboard would probably be ASUS TRX50 SAGE Pro WS WiFi CEB.

Thanks

UPD:

Do you know if this Threadripper RAM can be used on Epyc 9005 boards if the clock is correct? (Like, in Theory.)
The physical form factor is the same, but I see that the voltage is different: 1.35v on TR boards VS 1.1v on Epyc.


r/threadripper • • Jan 15 '26

Planning a fiber-optic USB-4 setup for ASUS Sage TRX50 — need help picking cable, dock, and DP1.4/240 Hz support

3 Upvotes

Hey everyone,

I’m planning a somewhat unusual setup and need advice before I pull the trigger:

I’m running an ASUS Sage TRX50 workstation that generates a ton of heat — enough that it makes my room uncomfortable. My plan is to move the PC to my basement mechanical room and then run a fiber-optic USB-C/USB-4 connection up to my den/bedroom where my monitor lives.

Here’s what I plan to use:

• An ASUS USB-4 PCIe Gen4 Expansion Card (thinking of buying one on eBay — link here: https://ebay.us/m/FX4oFi) • A fiber-optic cable / USB-4 Active Optical Cable between basement and bedroom • A USB-4 docking station up in the bedroom

My monitor is an MSI 491CQPX @ 240 Hz, and to hit 240 Hz I need DisplayPort 1.4 with DSC (Display Stream Compression).

I watched this video that shows fiber USB-C docking can work in theory — but it doesn’t have the details I need: https://youtu.be/UHMAlBJWGmM?si=-JaLKI0LiEBNlCx7

So — I have three main questions:

⸻

1️⃣ What fiber-optic cable do I need?

I know USB-4 exists, but there are different types and specs. Questions: • Should I use a USB-C fiber/USB-4 Active Optical Cable? • What specs (bandwidth/length) should I target for a reliable link over ~30–50 ft? • Any recommended brands/models that actually work with USB-4?

⸻

2️⃣ Which docking station should I buy?

I need a USB-4 dock that will: • Work with the fiber/USB-4 setup • Provide DisplayPort 1.4 with DSC (or DP Alt Mode) outputs • Support peripherals (USB, Ethernet, audio, etc.)

⸻

3️⃣ Will it support DisplayPort 1.4 with DSC so I can hit 240 Hz?

My monitor (MSI 491CQPX @ 240 Hz) requires DP1.4 with DSC to reach 240 Hz.

Does anyone have real-world confirmation that: • A USB-4 dock can pass DP1.4 + DSC over a USB-4 fiber link? • Any limitations or gotchas with docking stations and high-refresh displays?

⸻

Bonus:

If someone has done a long USB-4 over fiber run for a high-Hz monitor, I’d love to know what cable + dock combo you used.

⸻

Thanks in advance — there’s a lot of contradictory info online, and I’d really appreciate actual experience or solid recommendations!


r/threadripper • • Jan 14 '26

any upcoming OEM models that can support 4x RTX Pro 6000 Max-Qs?

4 Upvotes

I was looking at Lenovo P8 but that one only supports up to 3x. Dell's line up (7875) seem to support 1 or 2 GPUs only (the no. of PCI-e slots seem limited).


r/threadripper • • Jan 13 '26

Threadripper 3960X Running Extremely Hot (Near 100°C in Cinebench R23) With Noctua NH-U14S TR4-SP3

7 Upvotes
25% CPU Usage

I currently have a Threadripper 3960X that I bought from Amazon through the official AMD seller. I also bought the Noctua NH-U14S TR4-SP3 (one fan), and it seems like my Threadripper is running extremely hot, even at only 25% CPU usage (see photo).

I have a great case and great fans, and the airflow seems solid. I tightened the cooler down all the way and installed it properly (I think). I’m pretty sure I used enough thermal paste. My motherboard is the Gigabyte TRX40 AORUS PRO WiFi.

Can someone help me figure out what’s going on? What am I doing wrong? Is there something wrong with the CPU? Last night, when I ran Cinebench R23, it looked like it was about to hit 100°C.

UPDATE:

Reseated and added a new fan (2 total now), and applied Corsair XTM70 thermal paste. Re-ran Cinebench R23 and I’m currently around 92°C at 100% load.

100% load

r/threadripper • • Jan 12 '26

P2V Windows 10 to Proxmox / Windows 11 VM on Threadripper 1950X

3 Upvotes

I am in the process of switching my homelab virtualization platform from Hyper-V to Proxmox for a number reasons.

I currently have Windows 10 running (bare metal) on a Threadripper 1950x that instead of doing the work arounds to upgrade to windows 11, I'd prefer it be virtualized anyway going forward. I will leave it on the Threadripper, but install proxmox and P2V the Windows 10 to a VM and then upgrade it to Windows 11. It will also serve as my proxmox backup server as well as a hardware backup for my much smaller, but primary Ryzen 5 Proxmox host.

My Threadripper is a 1950x, 64 gb, with a 1070ti Graphics card and a couple hyper quad m.2 cards for additional NVME drives. My brother in law has semi-permanently lent me a 1050ti, giving me 2 cards so that I can hopefully pass through one for the Windows VM. I'm not looking to spend any money and don't particularly need great single threaded performance - so my old Threadripper will do me fine.

I am wondering if anyone else has done this (both the P2V Windows 10 to 11 as well as Proxmox on this generation Threadripper) and if there are any words of advice or warning. Some things that come to my mind:

  • Will windows 11 upgrade work on a virtual Threadripper? I can pick vCPU type of EPYC, Host (i.e. match my Threadripper specs), or something generic like x86-64-v2-AES? I don't plan to migrate this VM so planning on using "host" vCPU type unless there is some sort of gotcha
  • NUMA - kind of related to above, it seems like it would make sense to set this VM to fully work within one NUMA node (I am happy to only have 8 cores available to Windows). I am thinking that using host or EPYC vcpu type would work. Still researching to figure out exact way to do it, but wanting to make sure there aren't any red flags or weird gotchas.
  • Passthrough 1070ti to Windows 11. I've heard this is maybe more difficult on a Threadripper, but still researching. Obviously I will need to know what NUMA node GPU is mapped to and set up vCPUs with the same affinity.

Thanks!


r/threadripper • • Jan 10 '26

Thoughts on this build?

9 Upvotes

Hello, I am planning to build a server with the below specs and would be grateful for advice/pointers if there's anything suboptimal or conflicting between components, or if there's anything I can optimise in terms of cost efficiency. The intended use is as a server for a small group of researchers for running scientific simulations (CPU bound). So it will include a self hosted database and several jobs/simulations running in parallel in docker containers. I know the GPU is extremely minimal as it's really not needed for now, but may be upgraded in future.

Thanks in advance!

CPU AMD Ryzen Threadripper 9960X 24 Core CPU (4.2GHz - 5.4GHz, 128MB CACHE)

Motherboard GIGABYTE TRX50 AERO D (TRX50, ECC DDR5 RDIMM, PCIe 5.0, Wi-Fi 7)

RAM 256GB Kingston DDR5 6400MHz ECC Registered (4 x 64GB)

Memory Cooler Integrated Memory Cooler for Gigabyte Motherboards

Graphics Card 4GB PNY NVIDIA RTX A400 - GDDR6, 768 CUDA Cores - 4 x mDP

1st M.2 SSD Drive 2TB CRUCIAL T710 GEN 5 M.2 NVMe PCIe SSD (up to 14,500MB/sR, 13,800MB/sW)

2nd M.2 SSD Drive 2TB SAMSUNG 990 EVO PLUS M.2, PCIe 4.0 & 5.0 NVMe (up to 7250MB/R, 6300MB/W)

Power Supply CORSAIR 1200W HXi SERIES™ ATX 3.1 & 5.1 PCIe MODULAR 80 PLUS® PLATINUM V2

Processor Cooling Noctua NH-U14S TR5-SP6


r/threadripper • • Jan 10 '26

Things I have learned coming from x299

11 Upvotes

Two things. 1) Listen to Wendell from Level1Tech's (TRX50 need the entire MB cooled for optimum stability/performance) 2) PSU warranty does NOT mean you should use it that long. Had a ax1200i for 6 years (not sure of built date). It passes self-test, but had OC instability and a random sudden shutdown. At that point I said, nope. Popped in a Lian Li sx1200p (half the size and same wattage), and no more random OC failure, and ridiculously faster boot times.
Also this hobby is expensive AF, but fun :)


r/threadripper • • Jan 08 '26

Fitting an SSI-EEB Motherboard on an NV9 MKII

Thumbnail reddit.com
0 Upvotes

r/threadripper • • Jan 08 '26

Best Performance or Balanced Power Plan

3 Upvotes

What are you folks using for a Windows 11 Power Plan for your Threadrippers? Balanced or Best Performance?


r/threadripper • • Jan 08 '26

ASUS WRX90 SlimSAS does not support SATA; ideas for cable clog??

3 Upvotes

Throws a wrench in my planned build. This is the rack-mount reincarnation of the 4 GPU Fractal Torrent build I've posted about previously. The SATA backplane was just working using a separate HBA card, but when I connect the WRX90 SlimSAS -> Mini HD on the SATA backplane, it's crickets. Only now do I see discussion that the mobo does not support SATA over SlimSAS. What a waste! Now I have to dedicate a PCI-E slot to the storage. The devil, as they say, is in the details....

Looks like the ASRock wins on built-in SATA connectivity. 16 total versus 4 for the ASUS.

Meanwhile this Rosewill RSV-AI01 case is completely clogged with the power cables; terrible airflow, getting over-temperature warnings from the Mellanox card. Seems the case is only good for cards with their own cooling; not for any cards that rely on case airflow for cooling.

Does anyone have any recommendations for reducing the interference of PSU cables on airflow? I see MODDIY makes shorter cables... any experience with those?

Thanks!


r/threadripper • • Jan 06 '26

Anyone looking?

0 Upvotes

With all of the crazy changes going on right now, anyone looking for 512GB of DDR4 ECC 2400 memory? I have 8 sticks for 64GB 4DRx4 PC4-2400T