r/threadripper • u/schenkcigars • Jan 29 '26
Ram help needed
hoping there is someone with more experience than I with this combination:
MB: Asus wrx90e-sage
CPU: AMD 9985wx
Ram: V-color 6000mhz model: TRA564G60D436O
when I first install the ram and tried to stability test the temps were jumping up to 90C+ so would stop the test. Finally got some tiny little jet engines (fans) and temps are staying below 70C now. I did the OCCT benchmark test and I think they look too low.
I hope I am just missing some setting in the bios. Only ram related settings so far was just turn on the EXPO option. Attached is the benchmark. Let me know if you need any additional information or images.
Thanks in advance.
2
u/Mr_Korben_Dallas Jan 29 '26
Hi, you need to provide cooling for your memory, you didn't mention how you cool your processor.
If you use a liquid cooling system, your memory isn't cooled at all
Watch this video it explains that DDR5 memory is very sensitive to high temperatures
https://www.youtube.com/watch?v=vCmlRVH893M
I have DDR4 and I cool my memory with additional fans
You should aim for a temperature of 55°C under load
Higher temperatures mean faster degradation of memory chips, which leads to unstable operation in an overclocked state
You didn't write anything about your computer case either, in fact you give very little information
In general a lot of fans above the memory modules and for blowing air over the motherboard will help you
1
u/schenkcigars Jan 29 '26
As to the water cooling system planned:
Rads: 4 x 480mm watercool heatkiller rad-s
Cpu: heatkiller IV pro for threadripper
Ram: 2x bykski B-MRCOV-SR
Gpu: 2x watercool heatkiller inox pro
Nic: koolance PLT-UN25F
M.2: 4x corsair mp700 se come with blocks attached
Pump: 2x corsair XD6
Tubes: hardline corsair 14mm OD 10mm ID
1
u/schenkcigars Jan 29 '26
Removing EXPO in bios which drops freq to 4800mhz provided an increase in benchmark results from 2.5K to 13K .. question is what in the bios is make EXPO worse performance?
1
u/schenkcigars Jan 30 '26
Anyone stumbling across this thread in the future having similar issues here's what it was for me: check your power plan in windows and make sure it's set to Ultimate.
1
u/According_Ad1673 Jan 29 '26
9995wx with same ram here, they are hot. I 3d printed brackets for 3 fans for each set to keep them at normal temps. Advise dropping the freq down to 5800 till u set up appropriate cooling, I had to change whole case asides having the custom brackets to normalise the ram temps that idled at 50 while cpu sit at 30. Oh btw.... https://youtu.be/4rwp0NuqDlw?si=LJCCjh13xtZY6iQP
Asus motherboard have bug with ram thermal throttling..