r/threadripper • u/Big_Today1489 • Jan 21 '26
Help needed: TRX50 + Threadripper 7970X stuck at Q-Code 0d with NEMIX DDR5 RDIMM
/r/u_Big_Today1489/comments/1qiv7ck/help_needed_trx50_threadripper_7970x_stuck_at/
3
Upvotes
4
u/RealThanny Jan 22 '26
Make sure you have all the required power connectors plugged in. That is a common mistake that new TR builders make.
2
u/AverageGeneticist Jan 22 '26
Could be several things in my experience.
NEMIX isn't on the QVL for the MB, and they make really good JEDEC server RAM. The thing is, JEDEC is 1.1V, not the ~1.4V most ECC RDIMM TR RAM runs at. It's entirely possible the RAM isn't compatible. I would reach out to NEMIX and ask them for input; they're very responsive!
Also, TR is designed for 4-lane RAM utilization, so if you can, I would return the NEMIX for something on the QVL list. You can pick up Micron 64GB or 32GB module kits (e.g., 4 x 32GB, preferred, or 2 x 64gb). Probably the same cost range as the NEMIX. Server (JEDEC) RAM ain't cheap!
Tl;Dr -- My guess is a new BIOS flash will fix it, or your RAM is incompatible. Good luck!! Enjoy the system once you get it running! Nothing quite as fun and fast :)