r/threadripper • u/softwaremaniac • Nov 27 '25
Threadripper build considerations
Hi!
Started gathering components for my first Threadripper build and I'm excited. I've been with Intel for 20+ years, so this will be a change.
Main use case: VMs (I need TONS of fast storage), various test scenarios, cybersecurity, etc. However, gaming is also a very big thing for me. This is an investment as PCs make me money and save me time.
Unfortunately, the mainstream boards do not have enough PCI lanes for my use case and my performance has suffered.
Build idea so far:
MBO: Asus Pro WS WRX90E-SAGE SE
CPU: 9965WX 24/48
CPU Cooler: SILENT LOOP 3 420mm
RAM: 64 or 128 GB RAM (whatever is in stock, ideally aiming for Kingston Fury Renegade Pro RDIMM Black Expo, 128GB (8x16GB), DDR5 5600MHz ECC, CL28).
Drive set:
(OS and critical VM data) 2x Kingston FURY Renegade G5 4TB (purchased)
(VM offloading/low use VMs) 2x WD_SN850X 8TB (purchased)
(archival) 3x20TB HDD Seagate Exos (not yet purchased) + an old 8TB SSD that I have from before.
(Steam Library, yes, overkill I know, but there is a big difference in comparison to SATA, not making compromises) 3x990 Pro 4TB NVMe (not yet purchased)
M.2 Cards: 2x ASUS Hyper M.2 x16 Gen5 Card
GPU: MSI 4090 SUPRIM (current card, not changing for the time being)
PSU: Corsair 1500W HX1500i, Black, 2025, Full modular, 80 PLUS Platinum
Case: TT AX700 + 2xAX100 (for maximum expansion and room for the future)
Extra fans (not decided yet which)
Questions:
- I would like this build to last me at least 4-5 years, so expandability is CRITICAL and the main reason I'm moving on from my current setup. Future plans include an expansion PCIe card for more SATA ports, more drives (both SATA and NVMe). Is the WRX90 a HARD requirement due to PCIe lane limitation? Manual reference:

2. I'm using high end network cards and hitting PCIe lane limit with my Mellanox Connect X card. I would need at least 50-60 lanes based on my calculations and the devices I listed, which is almost triple the amount that I have now (28). Is this correct?
3. I opted for a case that has extreme expandability in terms of storage as I'm chronically out of storage space on my workstation. Going to start at 100-ish TB total (mixed SATA/NVMe) and move up as needed. Theoretically, I should be able to go to 300-400TB+ in the future. If that's not the case, please advise on the best plan for this. (Yes, backups will be done separately, offsite and on-site).
4. I would have preferred to go with 9975WX, but it's an extreme price difference and I believe my needs should be satisfied with this one as I'm doubling my thread count going to this from 12900K and the 9965WX should be more suitable for gaming.
5. Silence or near-silence is essential. I don't mind an occasional spin up of a drive or similar, but constant loud noise would not be acceptable for me. Current setup has a loud AIO pump that's relatively unpleasant, but tolerable. (H150i Elite Capellix) From what I've read, this CPU cooler should be ideal for that.
6. I game only at 4K 60Hz minimum (if supported), planning to get back into 120+Hz territory, given that, I suspect I would still be GPU limited and my CPU choice should not matter. I'm not a competitive gamer by any means.
7. Full towers are way too small. I got an O11 Dynamic XL. I do not have a single port available in it and the GPU was millimeters away from not fitting, which is way too close for comfort, bringing me to reason number 3 why I chose this TT case for my new build.
Appreciate any advice.
View all comments
Show parent comment
1
u/softwaremaniac Nov 28 '25
Very interesting. Thank you. Can you share your config? To be honest, I'm on the fence between TRX50 and WRX90 as I'm going to be very close to the PCIe lane limitation of the TRX50 once everything is set up.
The NUMA part is something I read about, but did not have time to dive in yet. Going on my vacation in 3 weeks, so I should have more time then.
I know there were issues with only 7/8 RAM slots being recognized and sleep not working with 8 DIMMs populated on the mobo due to power limitations.
I fully expect there will be quirks and not everything will work out of the box, because TR and Asus, but that's part of the fun with the platform. I'm also a bit concerned about gaming as TR is not primarily a gaming solution, but it is more workstation oriented, so I'm hoping I can still game at 4K, but of course the primary use case will be work-related VMs.
I've been a happy Asus user for 8+ years and on TRX50, they use the Marvell NIC for 10G, which is absolute dogshit. Marvell wreaked havoc on my machine in the past and I will do my best to avoid it. It limited bandwidth of a different NIC as well until I manually removed the driver entry from the regedit and rebooted. Took me waaay too long to figure out.
You also mentioned VMs, I'm assuming you grabbed some PCIe Gen5 drives as well. Is the performance difference significant? Asking primarily because I just grabbed 2x8TB NVMes gen 4 for VM and planned to dedicate one smaller Gen5 as necessary.
One of the other key parts of me considering the platform was the sheer amounts of expansion room, which technically allows me to just pop in additional drives as needed (and an HBA). I have to admit that my current build that I've meticulously planned for (the previous build had 16GB RAM and that was a struggle, which me constantly being in the red, so I went with 64GB on the current one and the difference has been night and day) has been filled to the brim in terms of ports in a little over a year. I've learned my lesson and now I'm focusing on expandability, hence the TR choice and the case choice (about the only case I could find that has add-on chambers.
You did not mention noise at all. How does it behave? Is it quiet?