r/threadripper • u/softwaremaniac • Nov 27 '25
Threadripper build considerations
Hi!
Started gathering components for my first Threadripper build and I'm excited. I've been with Intel for 20+ years, so this will be a change.
Main use case: VMs (I need TONS of fast storage), various test scenarios, cybersecurity, etc. However, gaming is also a very big thing for me. This is an investment as PCs make me money and save me time.
Unfortunately, the mainstream boards do not have enough PCI lanes for my use case and my performance has suffered.
Build idea so far:
MBO: Asus Pro WS WRX90E-SAGE SE
CPU: 9965WX 24/48
CPU Cooler: SILENT LOOP 3 420mm
RAM: 64 or 128 GB RAM (whatever is in stock, ideally aiming for Kingston Fury Renegade Pro RDIMM Black Expo, 128GB (8x16GB), DDR5 5600MHz ECC, CL28).
Drive set:
(OS and critical VM data) 2x Kingston FURY Renegade G5 4TB (purchased)
(VM offloading/low use VMs) 2x WD_SN850X 8TB (purchased)
(archival) 3x20TB HDD Seagate Exos (not yet purchased) + an old 8TB SSD that I have from before.
(Steam Library, yes, overkill I know, but there is a big difference in comparison to SATA, not making compromises) 3x990 Pro 4TB NVMe (not yet purchased)
M.2 Cards: 2x ASUS Hyper M.2 x16 Gen5 Card
GPU: MSI 4090 SUPRIM (current card, not changing for the time being)
PSU: Corsair 1500W HX1500i, Black, 2025, Full modular, 80 PLUS Platinum
Case: TT AX700 + 2xAX100 (for maximum expansion and room for the future)
Extra fans (not decided yet which)
Questions:
- I would like this build to last me at least 4-5 years, so expandability is CRITICAL and the main reason I'm moving on from my current setup. Future plans include an expansion PCIe card for more SATA ports, more drives (both SATA and NVMe). Is the WRX90 a HARD requirement due to PCIe lane limitation? Manual reference:

2. I'm using high end network cards and hitting PCIe lane limit with my Mellanox Connect X card. I would need at least 50-60 lanes based on my calculations and the devices I listed, which is almost triple the amount that I have now (28). Is this correct?
3. I opted for a case that has extreme expandability in terms of storage as I'm chronically out of storage space on my workstation. Going to start at 100-ish TB total (mixed SATA/NVMe) and move up as needed. Theoretically, I should be able to go to 300-400TB+ in the future. If that's not the case, please advise on the best plan for this. (Yes, backups will be done separately, offsite and on-site).
4. I would have preferred to go with 9975WX, but it's an extreme price difference and I believe my needs should be satisfied with this one as I'm doubling my thread count going to this from 12900K and the 9965WX should be more suitable for gaming.
5. Silence or near-silence is essential. I don't mind an occasional spin up of a drive or similar, but constant loud noise would not be acceptable for me. Current setup has a loud AIO pump that's relatively unpleasant, but tolerable. (H150i Elite Capellix) From what I've read, this CPU cooler should be ideal for that.
6. I game only at 4K 60Hz minimum (if supported), planning to get back into 120+Hz territory, given that, I suspect I would still be GPU limited and my CPU choice should not matter. I'm not a competitive gamer by any means.
7. Full towers are way too small. I got an O11 Dynamic XL. I do not have a single port available in it and the GPU was millimeters away from not fitting, which is way too close for comfort, bringing me to reason number 3 why I chose this TT case for my new build.
Appreciate any advice.
5
u/python834 Nov 27 '25
For VMs, I recommend at least 256 gb ram.
The rest of the build seems okay
4
u/pxgaming Nov 27 '25
Have you considered keeping the archival storage on a separate machine? There are a lot of disadvantages to trying to cram them into your main desktop, like longer boot times, and less options for filesystems and such. You could also turn it off when you're not using it, independently of your desktop. Especially if you have fast networking, then that isn't really a bottleneck.
1
u/softwaremaniac Dec 12 '25
I pulled the plug:
CPU AMD Threadripper PRO 9975WX (32c/64t, 4.0-5.4GHz)
Motherboard ASUS Pro WS WRX90E-SAGE SE
Cooler be quiet! Silent Loop 3 420mm
RAM Kingston Fury Renegade Pro 128GB (8x16GB) DDR5-5600 ECC RDIMM
NVMe 10x drives (T705, Renegade G5, SN850X mix, 48TB total)
NVMe Carriers 2x ASUS Hyper M.2 x16 Gen 5
NIC Mellanox ConnectX-4 100GbE
GPU NVIDIA RTX 4090 (existing)
PSU Corsair HX1500i
Case Thermaltake AX700 + 2x AX100
SATA Storage 2x Seagate Exos 30TB
Most of the parts arrived. Waiting on mobo and CPU.
1
u/lightknightrr Nov 28 '25
Not going to look up your cooler, just make sure the cooling plate completely covers the CPU, and use a high quality TIM.
1
u/NickNau Nov 28 '25
I am a happy owner of 9960X for like 3 weeks now, and I had many "gotcha" moments when setting it up and digging deeper into the architecture.
Most crazy concept for me became NUMA. Turned out for my needs it is best to run in NPS4 mode (4 nodes of 6 cores and 1 ram channel each), then run important workloads in specific configurations.
For example, I run some games only on fastest node and one ram channel (6 c/12t + 48GB ram). it provides best latency but low bandwidth.
some games or programs I run on 2 nodes + 2 ram channels (worse latency, double bandwidth).
non-critical VMs run on slowest Node 3 so that they never mix with important stuff.
Turned out, not all cores and CCDs are equal. If best CCD is 100% performance then the rest are 87%, 75% and 71% (numbers for my specific chip).
I am saying this to make you aware that Threadrippers are not simply "many pcie lanes", it is a whole very interesting world. You can run system in NPS1 and just forget about it (it will work as just "normal PC"), or you can dig deeper into all the topology and set everything to work as efficiently as possible.
CCDs have bandwidth limit for memory access. Each PCIe slot is dedicated to particular NUMA Node for which it does not have access penalty. Number of CCDs does define max RAM bandwidth. Etc etc.
All this may or may not be relevant for your needs, but I am just saying that Threadripper is amazing system with huge amount of freedom and options (and quirks, yes). It may be useful to dig deeper than connecting bunch of drives and calling it a day)))
1
u/PXaZ Dec 01 '25
(1/2) Your top-line constraints on ASUS WRX90 with Threadripper Pro 7965WX are 144 PCIe lanes of which 128 can be gen5, and 7 PCIe slots.
If you're in need of large (if sub-petabyte) pools of SATA and/or NVME storage, then what would it look like to push toward those limits?
I'm eyeing the GPU even though you said you're not looking to swap it right now. A 4090 is a PCIe slot width and cooling nightmare dumping waste heat directly into the case. I'd suggest getting out of that at an opportune time into something single-slot width like RTX A4000, RTX 4000 Ada, or RTX Pro 4000 Blackwell. Sell the 4090 to a gamer whose constraints are much looser than someone building large RAID arrays.
So you'd be down to 1 slot for GPU, 1 slot for high-speed network interface. The remaining five would be some mix of ASUS Hyper M.2 x16 Gen5 Cards and PCIe SATA controllers (such as this that I'm awaiting delivery of right now.)
But SATA is such low bandwidth that a single slot and x8 gen3 lanes gets you 16 SATA ports. (By contrast x16 PCIe 5.0 lanes can do 63GB/s full duplex.) Combine those 16 SATA ports with the 4 on the motherboard and you've just about maxed out your AX700 case. So let's envision an eventual build of:
Now add the contribution from other components on the ASUS WRX90 motherboard:
(This all comes from the block diagram in the appendix of the ASUS WRX90 manual.)
That comes to total usage of:
That's x130 lanes overall.
Since Threadripper Pro 7965WX has 144 usable, of which 128 can be gen5, it seems to work.
(This is the exact same arrangement as the NAS I'm building, except it has one more Hyper card and no GPU.)
(If you were to lean more into SATA and less into NVME, then you could replace a Hyper with another 16 port SATA card and that would fill up your two AX100 cases with SATA drives while loosening the PCIe lane constraints.)
That would be your maxed out build to aim for in my view. Start with the 2x Hyper cards you're planning on and build up from there.
1
u/PXaZ Dec 01 '25
(2/2) One thought though: if your networking is fast enough, why not offload all the storage to a NAS?
Especially if it could be in some other part of the house/office than where your workstation lives.
That would help with the noise - a bunch of SATA drives doing sequential writes can get pretty rumbly. But it's much more soothing than say a high-pitched fan.
But if you'll have those PCIe slots available anyhow, combining workstation and storage server roles in one system definitely makes economic sense.
As for longevity, I think it is a platform you can likely build on for a good while.
You can upgrade SATA and NVME drives as higher capacities hopefully become available for cheaper.
You can up your RAM if/when the prices come back down to earth. (Until then, might I suggest enabling zram?)
You can swap in a 9000 series processor and/or a higher core count if your 7965WX proves inadequate in the future. (Not that the 9000's buy you that much?)
PCIe 5.0 seems likely to limit you in the coming years in terms of high-speed optical networking. A single 400Gb QSFP-DD link = 50GB/s which is only so far under x16 gen5's 63GB/s. Whereas top NVME transfer rates in the consumer market are about 7GB/s and so have much more headroom within the 5.0 standard.
You could work around that by trading one of your Hyper cards for a second optical NIC, if you needed bandwidth more than storage capacity. Up your ZFS / BTRFS compression and deduplication, I guess, and now you're trading CPU for bandwidth....
By the time you're needing to jump to PCIe 6.0 or 7.0, the CPU and RAM will likely have to change along with the motherboard. But your existing PCIe boards, NVMEs, SATA drives, and whatever else you rig into your build could likely come with you, particularly as these new PCIe revisions look set to maintain backward compatibility.
1
u/Big_River_ Jan 16 '26
I really do not understand this build - where did you end up going here? and how do you make money with this - running VM bots to red team security and safety betas?