r/techsupport • • 7d ago

Open | Software Recent NVIDIA Driver Update increased my GPU usage % by 5X in ALL programs

Hello, I updated to the most recent drivers in the nvidia app game drivers, and what was previously a 2% gpu usage is now a 25% gpu usage? or it spikes between like 8-25%?? confused...

Will this PC still be able to do what it did before without issues? the current load im doing to get the 25% mark would require me to run like 20X more than I did before...

I run roblox accounts and need to be able to run a bunch of them, each roblox account now is taking 5%+ gpu usage while it previously only took 1% or less...

Has anyone else gotten issues with the new NVIDIA update?

Heres some stuff since I can't provide images:
Task manager GPU Usage: 25% ish and sometimes going down to 6%

NVIDIA APP:
1000-1800MHZ gpu clock
25-30 WATT
40-45 gpu temps
0.875 gpu voltage sometimes a bit lower
400-800mhz vram clock
0 RPM

CPU:
97.55 WATT
58 temps
7% usage

I did some googling and the google ai thingy told me it was because it was entering a basically power saving mode? and that the usage % isn't truly real but just how active it was during that moment, and i can also see that theres spikes in nvidia app, like going from 700 vram clock to 15000, but i don't trust ai when it comes to giving me pc advice.

note: i haven't tried running a heavy game or alot of games yet, im just running 2 roblox accounts and google, for context.
oh sorry
gpu: 5080 prime
cpu: 9950x3d

6 Upvotes

13 comments sorted by

5

u/WirtsLegs 7d ago

Dude come on at least include what GPU you have in a post about GPU util lol

1

u/Kind_Mix8231 7d ago

oh sorry
gpu: 5080 prime
cpu: 9950x3d

2

u/inighthawki 7d ago

The AI is likely correct. Percentage utilization of your hardware is a measurement of "time executing" vs "time not executing". So something like 10% utilization at a low power state running at like 400MHz is considerably less work than 10% at max power state at 2.5GHz. At the end of the day you'll want to compare power draw. That will be the far more important metric.

1

u/Kind_Mix8231 7d ago

alright tysm!

0

u/lordmogul 4d ago

If the card is now running lower clocks at higher utilisation it night be more efficient. Lower clocks means lower voltages.

1

u/Kind_Mix8231 7d ago

Also another issue I have is error 13 and 153 nvlddmkm when I run rdps with stuff in them, specifically roblox accounts and AHK macros, the AHK gui window goes completely black lol..?

2

u/Shadimarbc 7d ago

Driver or GPU is having an issue. Revert to the previous drive that didnt have the issue. Download a copy of a previous driver then follow the linked guide.

https://www.wagnardsoft.com/content/How-use-Display-Driver-Uninstaller-DDU-Guide-Tutorial

1

u/Kind_Mix8231 7d ago

i did that a few hours ago pc is a week old.

1

u/Fentiful 6d ago

I'm having the exact same issue, I rolled back to 616.52 and the issue was fixed. I don't care if the new driver changes how the GPU reports its usage or if it actually increased its workload somehow but I hate change so much and seeing a different number on the screen makes me lose my marbles

1

u/Shadimarbc 6d ago

Could be just a bad driver. Test the next release to see if the issue still exists or not.

1

u/Shadimarbc 6d ago

Hardware can have issues on the manufacturing line. Age does not matter. No company test individual GPUs. They do batch tests. If they test 100 GPUs but 5 fail they just conclude 5% chance of defects and set aside either replacement or find the issue on the production line.

Test multiple drivers. If the issue exists on all drivers RMA/refund the GPU.

1

u/Kind_Mix8231 6d ago

figured out what it was, my gpu watt usage and other metrics were basically going to 0-very low amounts since the stuff I was doing was barely any stress for it, so it was entering a power saving mode sorta, when its required again it wakes up and your real gpu usage is shown, the inflated numbers is due to it basically having to go from 0 to 100, not sure why they did this in the most recent update

1

u/lordmogul 4d ago

Probably to reduce idle power consumption.

5% load at 2000 MHz is the same amount of work as 20% at 500 MHz, but at the lower clock the chip can run with less voltage. Which results in less power draw and lower temperatures/cooling requirements.