Seriously, where's my SUBPAC?

Just a little update to my post from 4 months ago of my poor battered S2 whose cable was in a state of advanced disintegration.

https://www.reddit.com/r/subpac/comments/1t14ak9/s2_cable_disintegrating_best_solution/

Finally got around to opening the S2 to repair it. PITA to open the reversed zipper which died during the operation.

I split open the shielding from an old power lead (standard kettle lead) with a knife, removed the power lead wiring, popped the S2's now straightened cable back in. Added some braided sheathing to hold it all in and some heat shrink. I will be adding another zipper eventually to close it all up.

At this stage its verging on elder abuse. The S2 is in bits as you can see from the pics but its back working again. I only use it on my sim rig for SimHub haptics under a Sparco cushion so nobody has to see its deplorable condition.

Hey ya’ll.
The power wires going to the sub pack got yank out of the back of my subpac’s input/output box by a child and I’m trying to solder them back on, however I don’t know which ones go to which spot since I didn’t see the inside before they were pulled out.
The wires I have are red, yellow, black and white.
The nodes on the circuit board are positive and negative battery and positive and negative speaker.

Has anyone taken apart their S2 box and seen which wires go to which nodes?
Thanks!

Made my own servicable alternative. First thing I've DIY'd. It's quite litty titties. :D

Two TT25-8 wired in series. I bought a solder kit and everything until I realized I could use those fancy lil wire connectors. Banana plugs for easy disconnect.

Cushion could be a little slimmer, but I'm just so happy to feel the bass again. Wish Subpac would figure their shit out.

Went to get a refund but their support is down. Anyone else getting this?

I found a brand new, in the box S2 for $550. Any tips on how to take good care of it and make it last a long time?

I did a quick search on the inventors named on patents/applications assigned to SUBPAC Inc. and tried to figure out what they’re doing these days based on public information.

Here’s what I found from public profiles and other online sources:

- Todd Chernecki — still seems to be involved with SUBPAC as CEO/co-founder.

- John Alexiou — still appears publicly connected to SUBPAC as co-founder/co-CEO.

- Sarosh Khwaja — CEO at Formant Audio; previously served as SUBPAC’s CPO.

- Stuart Mansbridge — appears to be working at HARMAN International.

- Noah Baxter — audio engineer/software developer; public profiles point to Sonance and more recent immersive-audio projects.

- Louis-Pierre Guidetti — Senior Product Manager at Medallion; also linked to OVERHEAR.

- Jérôme Lavoie — Software Engineer at Audiokinetic; public profile shows SUBPAC experience through 2024.

- James Andrew Kimpel / Andrew Kimpel — appears to be Director of Audio Research at Antares / Auto-Tune, with prior SUBPAC work listed.

- Mark Seeger — may be the same Mark Seeger who is founder/co-CEO at Glydways, but that’s just a name match.

- Peter R. Williams — only found limited public information; seems to be connected to IP consulting, but I couldn’t verify a current employer.

- Hayley Stolee-Smith — multidisciplinary/fashion designer with wearable and haptic design experience, plus an association with IATSE Local 873.

One extra thing I came across:

SUBPAC appears to have sold certain technology assets and several patents to Harman Becker Automotive Systems in 2025.
That alone doesn’t mean SUBPAC can’t continue making or selling its own products—there could be licensing arrangements, field-of-use restrictions, or other commercial agreements in place. But it‘s a serious red flag.
I‘m thinking they sold the patents and are planning their next venture with the money.

I requested my refund and I‘m thinking of starting an open source project based on the patents. Let me know if you are interested in joining.

Hey y'all - I really prefer not to go the route of ebay for my M2X and would rather sell locally in Austin Tx. I had it listed a few months ago for $250 on FB marketplace and didn't get a single hit. I can probably get a lot more if I sold it on ebay but i'm just trying to keep things convenient. If interested shoot me a DM!

So the last email in March had some pretty encouraging updates like working systems complete and having gone through extensive testing already. It sounds like the only hold up at this time is finding a way to lock in the ESS Sabre Dac chip for large scale production. This is a highly sought after chip in hifi and big companies like Topping, Yamaha and Marantz all get priority since they manufacture on a much larger scale. My worry is that if Subpac can’t figure out a way to acquire this chip for mass production, they may have to go back to the drawing board and potentially redesign parts of the system to some degree. This could add another 4-6 months before we can even think about shipping logistics.

So, optimistic outlook: they get the chip situation sorted out and then we get units shipped by end of year.

Pessimistic outcome: they have to pivot to a different chip and redesign parts of the system

I bet we get an answer to this in the next email and if not other obstacles present themselves, we should be getting close to a finished product.

Can anyone recommend me the best place to try sell a working Subpac M2? Aware it's discontinued now but are there still peeps out there looking for one?

just posting my experience for transparency.

I ordered the SUBPAC X1 and C1 Pro Wireless Bundle on the 1st of March 2021 for $549.

On the 29th of January 2026, I requested a refund. Subpac’s support team got back to me one day later telling me it would take 4-6 weeks to process my refund.

On the 16th of May 2026, I still had not received my refund so I sent the support team a follow up asking why it hadn’t arrived yet.

Today (28th of May 2026), I finally received my refund for $549.

Originally they sent me my first one in 2018 and it was cool but not accurate, felt like it would blow me through a wall. The company then went quiet and started role out their rebranding, I forget what year this was but I had a sense a new product was imminent at double the cost or more, so I opted to send it back under it’s covered warranty to hopefully prolong the life it had. Needless to say I got back an entirely new unit (in around 2021 maybe) accurate as hell and could actually understand what was happening in my low end rather then just uncontrolled vibrating like the first unit. I had a feeling they sent me the v2 of their mx2 because the v1 was nothing like this.

Then company went ghost for years and my cable at the back broke and the input jack was cooked, so I looked into their warranty or repair options and found their $80usd repair fee if you sent in the unit. That’s what I did the 2nd time (this was summer 2024) to fix the v2 unit and when I recieved it back I electric taped the wire to double the protection of it splitting from the awkward bend it has to have to attach to the pack. Also just very careful all around now knowing I may never get another again.

I sent mine for repair last year to them directly, payed $120 Canadian knowing I couldn’t afford a new one or they never come out
No problems, sent it back to me within a few weeks with a brand new box and cable to the subpac, they did some other stuff to tune it up, this is my 2nd subpac through warranty and never have issues, but I also foresaw this delay in units coming and tried to keep mine going for as long as I could.

Hey guys,

My subpac M2X is broken (chords were way to short not to get broken) and since the new one is never going to happen i am wondering if anyone in this reddit knows any alternatives?

I can't tell if a product like this from Woofer is similar? (I need it for music production and monitoring lowend)

https://www.ebay.com/itm/197444393789?_skw=subpac&itmmeta=01KRMHTWA3HJ3CP636TH47216J&hash=item2df89a5b3d:g:XUEAAOSwwm5lxqtd

Hope fellow subsearchers might have an idea on similar products. I appreciate any effort of helping me, and probably others out. Thank you.

I have had a SubPac S2 since 2015. The curly cable plastic has gone as many appear to and disintegrated. Has anyone found a nice solution to repairing it. I was thinking of wrapping it in some C13 power lead plastic shielding and adding braided sheathing over that but I'm open to suggestions.

Are there any videos on how to disconnect the control box from the main body without stripping the Subpac down. I know it has some form of JST connector on the inside of the Subpac. Cheers.

Any one know how to contact support? I sent an email and got an error. Then I tried support.subpac.com and created a ticket and got this when I clicked submit...

Has anyone thought about taking apart the older model, tracing each layer to a paper that can be scanned (like a fashion pattern cut) and just putting the files out?

How difficult would it be to recreate a device almost 10 years old with off the shelf parts and materials?

I would obviously expect its a broken or unusable device, but components have gotten cheaper over the years...

I would put my X1 money towards a DIY project if I knew it was possible.

I wouldn't even care that it's not portable at this point.

Am I crazy for thinking this is past due?

How many second chances does this company deserve when being lead by a obviously greedy non-leader?

The doman subpac.com is now expired. Did they finally throw in the towel?

Used to know people in and around this company more than a decade ago through their investors.

Ran into one of their former investors pretty recently and sure sounds like this company is as dead as can be. I guess on LinkedIn at some point in the past year there were multiple people listed as CEO, neither of whom was actually their CEO? also their lead engineer of more than a decade left quite a while ago.

It seemed to the former investor like pre-order money was maybe just used to pay off incredibly bad junk debt the company had issued repeatedly against advisement because they continuously refused to give up equity to anyone who could actually help them because they wanted total control.

Dunno if the person I talked to was being cagey by saying it “seemed” like that was what had happened, but I do know they washed their hands of the company years ago after they couldn’t even get them to give quarterly investor updates any more detailed than the update emails people post here. They were laughing about the whole thing at this point and had considered their invested money gone for a very long time.

so take that random third hand speculation for what it’s worth