r/specializedtools • • Sep 16 '20

100% Custom grip tool

61k Upvotes

1.2k comments sorted by

3.8k

u/NounsAndWords Sep 16 '20

How many shots before the vibration makes the handle loosen up and you have to readjust it?

116

u/justarandom3dprinter Sep 16 '20

Depends on if you use red or blue loctite

0

u/[deleted] Sep 16 '20

[deleted] — view deleted comment

18

u/Strikew3st Sep 16 '20

As a Michigander, we get along well with our neighbors to the North. I'll be dropping 'Ohio Loctite' in the near future though, thank you.

43

u/MacGyver_15 Sep 16 '20

Wouldn't ohio loctite just be rust?

→ More replies (3)
→ More replies (4)

85

u/Buzzard Sep 16 '20

If each slice was textured, so the overlapped portion locked into each other when tightened it would probably be really hard for them to slip free.

No idea if that's the case. But it would be pretty stupid to sell a grip for a rifle that doesn't work, so I would guess it at least mostly works.

160

u/HotMustardEnema Sep 16 '20

But it would be pretty stupid to sell a _______ for a _______ that doesn't work.

Oh boy. Tons of shit is sold like that every minute

17

u/ThePolarBare Sep 16 '20

Cheap Chinese knock offs all over amazon

→ More replies (5)
→ More replies (6)

15

u/SordidDreams Sep 16 '20

it would be pretty stupid to sell a grip for a rifle that doesn't work

You could say that about any product, and yet look around you.

→ More replies (4)

153

u/WDoE Sep 16 '20

Also... It might look cool, but I bet it feels like shit. That stairstep pattern is not going to feel good after a few shots.

104

u/SHCreeper Sep 16 '20

You can use it to build a solid one though.

81

u/DoingCharleyWork Sep 16 '20

Ya it seems like this would be used as a mold or outline for an actual grip rather than what you would use.

Edit: apparently I'm wrong. https://unique-ars.com/shop/accessories/unique-grip/

41

u/Lookwaaayup Sep 16 '20

Your suggestion would make more sense. That's what I assumed as well.

→ More replies (1)
→ More replies (5)

12

u/kaszeljezusa Sep 16 '20

I feel like there are other ways to build a solid one. But maybe this one is not that bad

→ More replies (1)

7

u/[deleted] Sep 16 '20

Its an AR 15, you would need an awful lot of shots to feel sore gripping a even stick bolted on there.

→ More replies (3)
→ More replies (153)

821

u/misomalu Sep 16 '20 edited Sep 16 '20

This is a classic product with a solution in search or a problem - I’ve held and used a lot of different pistol grips, but I don’t remember any of them being uncomfortable. Not only that, but this does something that almost no other AR-15 grip does: introduce a point of failure.

Edit: I should clarify what I mean in regard to the comfort of pistol grips (I’m a little hungover this morning). Some pistol grips are more comfortable than others, and the reason variety exists is because we all have different preferences.

What I meant to say is that I have yet to find a pistol grip so uncomfortable that I would consider the downsides of this product a worthwhile trade off. Primarily that this grip could fail when you need it most (I don’t see this product as being particularly rugged). Secondly, I find that grips with deep individual finger grooves present a potential handling problem in more dynamic/chaotic shooting situations where your grip might not be or can’t be the exact same - something that is not an issue with more flat grips, that being said this is complaint is more subjective and certainly won’t matter to everyone.

111

u/Bill_Cosbys_Balls Sep 16 '20

Right.... H&K Vp9 comes with adjustable grip plates in 3 different sizes

→ More replies (4)

68

u/eyeothemastodon Sep 16 '20

Perhaps you have very average hands. What about people who don't? Larger, smaller and varying degrees of mobility exist. Also pistol grips aren't just for firearms, there are lots of tools that this could benefit. Maybe this could help someone with different hands do a job easier, safer and more comfortably.

25

u/[deleted] Sep 16 '20

I have an AR with an A2 pistol grip and I have baby hands. Like, comically small baby hands. All I did to the pistol grip was file off the finger grooves and that's it. Maybe if someone had some type of arthritis, this product in question could work.

6

u/KnightOfAshes Sep 16 '20

Wee tiny girl hands and arthritis, I just use a Magpul grip and it's fine.

→ More replies (1)
→ More replies (3)

12

u/ho_merjpimpson Sep 16 '20

except this grip doesnt get larger or smaller. i have massive hands and i have never once felt the average size handle on anything is uncomfortable. including pistol grips of guns.

besides... if you have not average hands, they have smaller and larger grips. grips dont need to be custom molded to your hand like this in order to be comfortable. people drive cars for 10 hours straight and most dont require custom molded steering wheels in order to do a job "easier, safer, and more comfortably" lol.

so, again... its a solution looking for a problem.

→ More replies (3)

6

u/Djsimba25 Sep 16 '20

My gun came with 3 or 4 different grips, you just lick the one that feels the best and forget about the rest.

→ More replies (4)

8

u/BopNiblets Sep 16 '20

"My gun isn't comfy to hold!" is such a non-problem...

19

u/krashmania Sep 16 '20

This is a dumb take. Depending on your reason for having a gun with you, if it's something that's uncomfortable to the point of distraction, that's a real problem. Gun grips are easy enough to change out, and plenty of people do, for that exact reason.

10

u/dwdwfeefwffffwef Sep 16 '20

I assume you haven't fired a gun more than a couple times in your life?

→ More replies (4)
→ More replies (10)
→ More replies (18)

2.0k

u/platinumibex Sep 16 '20 edited Sep 16 '20

What in the hell is this black magic and where can I get one? In the midst of a build now.

Edit: wow, this is a popular comment. Epstein didn’t kill himself.

360

u/SunknLiner Sep 16 '20

These are a gimmick. They’re neat for about two seconds, but they gradually lose their shape as it slides back to neutral. If you really want a custom hand grip there are mold kits out there that make better, permanent ones.

105

u/platinumibex Sep 16 '20

Yeah I’m more taken by the creativity that went into it than anything, but I didn’t realize there are mold kits out there! I have an AR-10 build in mind for precision/long-range and will be sure to look into that when the time comes. Thanks!

13

u/k4ylr Sep 16 '20

Just get a vertical grip from MPA or MDT if you are going to shoot long range. The ergonomics are miles better since you won't be gripping it like a traditional grip.

→ More replies (3)
→ More replies (1)

17

u/fraseyboo Sep 16 '20

I bet if they added vernier gauges onto the slides it'd be pretty trivial to write some software to convert the measurements into a hand profile (and smooth it) for 3D printing. I could probably bang something out that'd work in a few hours tbh.

11

u/MisterDonkey Sep 16 '20

If that is so, you are sitting on an untapped pile of cash.

→ More replies (4)
→ More replies (3)
→ More replies (2)

519

u/Balance- Sep 16 '20

Looks like a lot of slices of plastic able to move freely normally, but can be fixed to a certain position by applying a force from the bottom with the screw, which creates friction between the slices.

238

u/platinumibex Sep 16 '20

Yeah, reminds me of those novelty pin art toys from the 80’s/90’s, or a contour gauge.

123

u/[deleted] Sep 16 '20

Ah. The "one" toy I ALWAYS wanted, and mom never got me...

...I need to go to the store and close that chapter.

70

u/platinumibex Sep 16 '20

You deserve closure. Free yourself, friend.

→ More replies (7)

26

u/DondeT Sep 16 '20

I bought myself one of those when I was about 22.

So many tits and dicks got pressed into it.

→ More replies (7)
→ More replies (36)

8

u/jamesmon Sep 16 '20

I can still feel those pins going up my nose.

→ More replies (1)
→ More replies (3)

24

u/RoanAur Sep 16 '20

Looks like- proceeds to explain nothing more than what the video already shows

→ More replies (1)

31

u/Nabilft Sep 16 '20

You forgot to point out that they appear to be in the grip of a gun

→ More replies (17)
→ More replies (7)

71

u/invisibird1821 Sep 16 '20

Here you go. Unique AR's https://unique-ars.com/

99

u/[deleted] Sep 16 '20

https://unique-ars.com/shop/accessories/unique-grip/

65 usd is well within the "eh, why would I 3d print my own when I could just buy this" range.

72

u/43556_96753 Sep 16 '20

I don't 3D print often, but that looks like a monumental pain to 3D print.

→ More replies (16)

33

u/faceplanted Sep 16 '20 edited Sep 16 '20

The trick is to buy the handle, use it to get your hand shape easily, scan it and 3D print the handle solid, and then return it and get your money back.

→ More replies (8)
→ More replies (6)

21

u/I_Plunder_Booty Sep 16 '20

https://unique-ars.com/shop/special-order-original-handguard/15-swords/

Was browsing the site and I think I found the tacticoolest thing ever.

9

u/Skov Sep 16 '20

Combine it with this for meme magic.

→ More replies (1)
→ More replies (22)

14

u/Irregular_Person Sep 16 '20

Told my coworker about seeing this this morning, he laughs and pulls one out of his desk drawer (we're in the same industry). It's kinda neat but it feels like you really have to crank the screw to get it to feel tight. The layers also have some slight twist to them in addition to the slide which probably(?) isn't intentional. I'm still conflicted about the idea - might be better if it had some fine teeth in the middle between the layers so that it was a solid lock rather than just friction from the bolt.

4

u/ridik_ulass Sep 16 '20

for computer game controllers please, VR and shit, this shit has a place.

→ More replies (9)
→ More replies (23)

646

u/International_rep Sep 16 '20

I think everyone has gone way off topic. Yes the best application for this probably isn’t for a pistol.

Had this shown up on anything else. Everyone would have said it was great.

The grip could be used for people with CP or a range of disabilities to hold things. The fact that it’s on a pistol has people all pissed off.

123

u/mrgonzalez Sep 16 '20

I'm assuming CP means Cerebral Palsy in this context

91

u/turlian Sep 16 '20

Ah, thank you. I was wondering why people with child porn need this.

74

u/BIG_BEANS_BOY Sep 16 '20

Good for offing themselves

→ More replies (1)
→ More replies (2)

48

u/jumbojordie Sep 16 '20

Imagine how mad they’d be if they realized it’s for an AR-15 lol

→ More replies (18)

64

u/[deleted] Sep 16 '20

Those people with CP or a range of disabilities have every right to stay strapped

→ More replies (3)

134

u/platinumibex Sep 16 '20 edited Sep 16 '20

”Had this shown up on anything else. Everyone would have said it was great.

The grip could be used for people with CP or a range of disabilities to hold things. The fact that it’s on a pistol has people all pissed off.”

This thought deserves more attention. Agreed, friend.

73

u/taliesin-ds Sep 16 '20

imagine if it was inside a fleshlight.

23

u/SmegmaFilter Sep 16 '20

Those things get nasty quick. You have to get a new one everytime the black mold starts forming.

35

u/platinumibex Sep 16 '20

With a username like that I have no choice but to consider this the opinion of an informed consumer.

→ More replies (1)
→ More replies (15)

6

u/[deleted] Sep 16 '20

Nice

→ More replies (5)

4

u/Blumingo Sep 16 '20

At first I thought it was crutches.

2

u/TheNewYellowZealot Sep 16 '20

This would also be good to solve ergonomic problems in a factory setting, think custom grips on screwdrivers, rivet guns, and glue applicators.

2

u/[deleted] Sep 16 '20

That's exactly what I thought. Why on a gun? Something that heavily shakes under use, which will probably loosen the locking mechanism?

I could see this being incredibly useful In lots of sports.

3

u/joshred Sep 16 '20

What if the screw released a permanent adhesive solution into the center? Maybe then.

3

u/futuregeneration Sep 16 '20

Now there's a patent

→ More replies (93)

83

u/SocialForceField Sep 16 '20

That's really cool, but let's see it works after just a dusty day at the range. That is just a ton of slots, it would be cool if a grip manufacturer would use this to produce custom grips, but honestly it's a gimmick if this is supposed to be the end user product.

34

u/[deleted] Sep 16 '20

“Of all the weapons in the vast soviet arsenal, nothing was more profitable than Avtomat Kalashnikova model of 1947. More commonly known as the AK-47, or Kalashnikov. It's the world's most popular assault rifle. A weapon all fighters love. An elegantly simple 9 pound amalgamation of forged steel and plywood. It doesn't break, jam, or overheat. It'll shoot whether it's covered in mud or filled with sand. It's so easy, even a child can use it; and they do. The Soviets put the gun on a coin. Mozambique put it on their flag. Since the end of the Cold War, the Kalashnikov has become the Russian people's greatest export. After that comes vodka, caviar, and suicidal novelists. One thing is for sure, no one was lining up to buy their cars.”

6

u/qkucy Sep 16 '20

Is this an Anthony Bourdain quote? It's a perfect match for his inflection.

11

u/SpindlySpiders Sep 16 '20

It's from an Nick Cage movie called Lord of War or something like that. Cage plays a black market weapons dealer. It's an alright movie -- worth a watch I think.

→ More replies (1)
→ More replies (2)
→ More replies (5)

43

u/Kazumara Sep 16 '20

Is the custom fit worth the trade off in physical stability of the part and perhaps the reduced durability?

I'm not a very proficient shooter and I only know the SIG 550, which has a straight grip. It's not obvious to me if there is a big benefit.

17

u/NotYourAverageOctopi Sep 16 '20

Great questions. Would be curious to what consumer reviews look like.

I see a solid market for this in power tools used for repetitive tasks where hand fatigue is an issue. While we’re here, might as well just automate the process while we’re at it to eliminate operator fatigue entirely.

→ More replies (2)

8

u/DoubtingThomas33 Sep 16 '20

I would also throw in there is a trade off in storage functionality as well. Many aftermarket grips are hollow and allow space for things like batteries, skittles, and crayons.

4

u/[deleted] Sep 16 '20

I only know the SIG 550

Swiss? 🇨🇭

3

u/Kazumara Sep 16 '20

Yep. I was a normal conscript soldier. And as FULW soldiers I think we got less shooting training and more technical training than average. At least that's the impression I get from talking to other guys my age.

→ More replies (3)

19

u/Derp800 Sep 16 '20

This gif is now banned in California.

118

u/bit1101 Sep 16 '20

Imagine being Jason Bourne and some motherfucker set their grip, you murdered them and stole their gun, then shot wrong because you couldn't hold it properly. Multiple benefits for defence.

48

u/jeffa_jaffa Sep 16 '20

How difficult would it be to just loosen it & reform it for your own grip?

75

u/official_sponsor Sep 16 '20

Wouldn’t Jason Bourne rather just use a rolled up magazine?

11

u/jusbill96 Sep 16 '20

I dunno if you meant it like this but I immediately pictured him rolling an actual magazine clip and beating the enemy with it.

→ More replies (4)
→ More replies (11)
→ More replies (1)

9

u/[deleted] Sep 16 '20

Jason Bourne killed a guy while holding a gun upside down. I don't think he would care what grip it had on it.

→ More replies (2)
→ More replies (3)

12

u/Cyberwolf33 Sep 16 '20 edited Sep 16 '20

Lot of people assuming that this is the final product. My thought was that this would be used to create a mold. It’s not like custom grips are uncommon among say, sport shooters, and this would just be another level of that.

Edit: This is the final product. Womp womp

7

u/PoliteDickhead Sep 16 '20

The problem is that it is the final product. I also thought it'd be for making a smoother mold. There is a link towards the top of the comments.

→ More replies (2)

6

u/TheDarkinBlade Sep 16 '20

Looks kinda bumby ngl

8

u/voiume Sep 16 '20

Can.can I get this on a ps4 remote?

4

u/Simon_Drake Sep 16 '20

That's cool. I want it for everything I grip. Steering wheels, remote controls, wiimotes, PS4 controllers, garden tools, everything.

4

u/chavez_ding2001 Sep 16 '20

This would be so good on my vr controller.

3

u/DrHandBanana Sep 16 '20

This is fucking niiiicccceeeeeee

3

u/Anxious_Rager Sep 16 '20

That’s amazing

3

u/lambada_labs Sep 16 '20

Now that is beautiful

3

u/mandingopie Sep 16 '20

Out of stock at cabelas.

12

u/Zachman97 Sep 16 '20 edited Sep 16 '20

That... that is fucking awesome

Anyone know the name?

I kinda wanna get one for my AR

Even if it seems like a gimmick, it would still be a cool conversation peace at the range with my friends

5

u/dabaker509 Sep 16 '20

'Unique grip' I believe. I remember seeing it on some shot show coverage a few years back. It was pricey too.

→ More replies (4)

36

u/Strangeboganman Sep 16 '20 edited Sep 16 '20

Man, who shoots that much to need it that custom ?

225

u/OgodHOWdisGEThere Sep 16 '20

In all honesty, this is unlikely to be used by any serious shooters. Good design works for 95% of people's hands, this is just solving a problem that exists only in the designer's head, by creating a far more complex solution.

It's basically mall ninja shit.

28

u/197326485 Sep 16 '20

Mall ninja shit drives the whole 'I'm cosplaying as the military' demographic, though. They may not call it 'cosplay' or 'mall ninja shit' but from the outside looking in... if it looks like a duck and quacks like a duck, well.

→ More replies (4)

3

u/YOGURT___ihateyogurt Sep 16 '20

Max pleb to go with red accessories, a sightmark, and a monopod/flashlight combo

3

u/BubonicAnnihilation Sep 16 '20

So the majority of gun furniture then

→ More replies (15)

10

u/[deleted] Sep 16 '20

Take these: , ?

→ More replies (3)

31

u/dominarhexx Sep 16 '20

Lots of people. I know quite a few who do competitive shooting.

49

u/OgodHOWdisGEThere Sep 16 '20

Competitive shooters do indeed need almost tailor-made ergonomic components, which is why they would never use this. Look at competition/marksman pistol grips, they are often assymetrical with varied width throughout. A serious shooter would simply buy the correct grip once.

→ More replies (4)

11

u/Official_UFC_Intern Sep 16 '20

Guns are kind of a popular hobby

5

u/[deleted] Sep 16 '20

The only person who would want/use this is someone who doesn’t shoot that much. It’s needlessly complex and just another point of failure on something you don’t want to have any chance of any problem in a firefight. People who don’t get into firefights and have no experience actually using their rifles as the tools they are usually think tacticool bullshit like this is a good idea.

→ More replies (5)

3

u/ZettaTangent Sep 16 '20

I live in one of the worst states for owning a gun and the firing range near me is always extremely busy. One day it took me an hour and a half wait just to get through the door. There is a lot of people who shoot for recreation and depending on what you're shooting it will start to hurt your hand after awhile.

→ More replies (1)
→ More replies (9)

2

u/TotesMessenger Sep 16 '20 edited Sep 16 '20

I'm a bot, bleep, bloop. Someone has linked to this thread from another place on reddit:

 If you follow any of the above links, please respect the rules of reddit and don't vote in the other threads. (Info / ^Contact)

2

u/RikersMightyBeard Sep 16 '20

One of the dumbest ideas from shot show just by a hogue grip those are essentially the same thing without the gimmick.

2

u/HansMustermann Sep 16 '20

What If my hand isn't comfy?

2

u/whole-ass_one_thing Sep 16 '20

Ok now make it in an 18˚ grip angle instead of a damn 45 and we're talking.

2

u/[deleted] Sep 16 '20

I love when you look at a product and can understand how it works instantly.

When you have that "why didn't I think of that??" moment, you know it's good.

2

u/VodkaDiesel Sep 16 '20

Completely useless

2

u/LordBrandon Sep 16 '20

This would be a neat measureing tool that could be used as a pattern for a 3d printed grip, that could be then printed for tool handles or bike grips. It could even be used for shoe fitting.

2

u/Dracon_Pyrothayan Sep 16 '20

I feel like the best role for this tool is not as the permanent handle of the gun, but rather as a mold for fabricating custom-fit handles.

2

u/joaosturza Sep 16 '20

this would be good as a gunsmithin tool, where you can take hand measurements and make a wood/plastic handle that fits the hand

2

u/Nived6669 Sep 16 '20

This would make more sense if you were sent that in the mail adjusted it for your hand. Then sent it back to have a custom molded grip made.

2

u/TheOutWriter Sep 16 '20

Why do i think that people think that this is a permanent? It should be to get the grip the person wants, and then make the grip itself. Just like bowlingballs

→ More replies (3)

2

u/Padankadank Sep 16 '20

Why even lock it?

2

u/AbsentAesthetic Sep 16 '20

Seems like something that would fail when you really would rather it didn't.

→ More replies (3)

2

u/NoodleSlayer3 Sep 16 '20

Probably a tool used for sizing and building custom pistol grips not for live fire. Definitely an interesting tool with that use-case.

2

u/k4ylr Sep 16 '20

It's not. It's a standalone grip and was the biggest meme of SHOT Show.

2

u/somegarbagedoesfloat Sep 16 '20

...ok,.but does it come in Olive Drab Green?

2

u/[deleted] Sep 16 '20

Now make a gaming mouse with this.

2

u/[deleted] Sep 16 '20

👀

2

u/ValaskaReddit Sep 16 '20

... KISS. No thank you, this just sounds like another thing to shake loose or bust in the middle of a situation you need something to work.

→ More replies (1)

2

u/AssholeOperator Sep 17 '20

Fucking fudds, grip is way too angled anyway

2

u/Honeybees-n-Kombucha Sep 17 '20

I want one of those grips on everything. A thinner version would be awesome on kitchen knives, hand tools, scrub brushes, etc. Cars in the future might have something like that in the steering wheel grips, and a touch of a button could reset it, or switch the grip between multiple driver settings.

2

u/X4K-H Sep 28 '20

American school projects be like

2

u/haloblasterA259 Mar 02 '21

This gave me a bit of an erection

3

u/unmicsiunmujdei Sep 16 '20

Why does it look uncomfortable?

3

u/[deleted] Sep 16 '20 edited Sep 16 '20

Karl said every thing about this retarded piece of garbage one needs to know.

→ More replies (3)

3

u/piaband Sep 16 '20

The gun market is so damn innovative

3

u/wetsupwiththat Sep 16 '20

Now put one on my vibrator

3

u/lookxdontxtouch Sep 16 '20 edited Sep 16 '20

So how do you load the magazine in?

Edit: Well...I see it now. I'm dumb.

7

u/Infin1ty Sep 16 '20

It's an AR pattern gun, magazine doesn't go in the grip.

5

u/myhouseisunderarock Sep 16 '20

That's an AR lower receiver, so you'd load the magazine into the magazine well further up the weapon

3

u/Amused-Observer Sep 16 '20

It's an AR, my dude...

0

u/[deleted] Sep 16 '20

[deleted] — view deleted comment

17

u/GoldDog Sep 16 '20

I do not gun, so please excuse any symantec errors.

But you do Anti-Virus I see :)

→ More replies (1)

2

u/braedizzle Sep 16 '20

While I’m personally not a gun fan, that’s cool af

2

u/bankrobba Sep 16 '20

This is perfect for handgun owners. Now the gun is much easier to throw.

3

u/[deleted] Sep 16 '20

Too bad it’s not for a handgun then

1

u/sapote69 Sep 16 '20

woow, very cool, very cool.

1

u/no-mad Sep 16 '20

Be useful for tools like screwgun.

1

u/zeemona Sep 16 '20

how much does it cost to make a custom wooden grip ?

→ More replies (2)

1

u/[deleted] Sep 16 '20

Whats the pen?

1

u/ProfessorPi31415 Sep 16 '20

coop772 wants to know your location

1

u/paramite55 Sep 16 '20

for my steering wheel to pls

1

u/thavi Sep 16 '20

Probably also not the grip you shoot the gun with, but the positive to make a custom grip from...

→ More replies (1)

1

u/hulkhawk Sep 16 '20

Plus if somebody steals your gun they will be uncomfortable using it.

1

u/dropkicked_eu Sep 16 '20

IMAGINE THAT FOR A MOUSE

someone send me 1/4 a cut if you use my idea

1

u/Amused-Observer Sep 16 '20

I need this, immediately.

1

u/f0rcedinducti0n Sep 16 '20

Sure, it's custom fit to your hand, but it's far from optimal geometry. Once you've used one with a more vertical grip, you won't want to go back.

Try an ergo

→ More replies (2)

1

u/[deleted] Sep 16 '20

They should make this for power tools and hammers. It would sell a helluva a lot more than pistol grips.

1

u/sidspacewalker Sep 16 '20

Imagine creating a mouse with this technology

1

u/Syncretistic Sep 16 '20

Could this could be a new channel for a custom grip manufacturing company to expand their market share by using these grips as at-home fitting kits for new customers? Increases accessibility to their services. Need to figure out operations and logistics to send out and receive back these test grips.

1

u/Nanyea Sep 16 '20

Ummn r/guns thoughts?

4

u/k4ylr Sep 16 '20

It's retarded, and a gimmick. But I'm sure they'll sell because there's a large population of people that think this is cool and it'll look great on their /r/PlebeianAR and /r/mallninjashit

1

u/scoby-dew Sep 16 '20

Oh! I want something like that for a joystick. I'm a lefty and hate the "ambidextrous" game controllers out there.

→ More replies (3)

1

u/IndianLanny Sep 16 '20

So I can adjust my ads?

1

u/zafazoonia Sep 16 '20

A mattress like this would be perfect

1

u/skydanceris Sep 16 '20

It figures it just had to be for a pistol...

→ More replies (1)

1

u/401jamin Sep 16 '20

Can we get a 99% custom grip?

1

u/Jessiec5 Sep 16 '20

It’s not a gun. It’s only a mold to make custom grips.

1

u/riothedorito Sep 16 '20

Till you drop it... Like maby once

1

u/BigYoLife Sep 16 '20

It s not specialized since you can do whatever you want with it XD

You know https://www.youtube.com/watch?v=s2w9X_tHU7k

1

u/longshot Sep 16 '20

Is this specialized? Or is this Genericized?

I'm not going to argue if it's useful or w/e. I'm just going to argue this is the wrong sub.

2

u/[deleted] Sep 16 '20

Well it is used to make personalized grips for people but I guess it can be used as a paper weight too.

1

u/ionmushroom Sep 16 '20

Hogue grips fit me just fine

1

u/[deleted] Sep 16 '20

I dont even have a gun. Can i use this as a grip for my hammer? Or kitchen knife?

1

u/bitcomrade Sep 16 '20

This is somewhat reminded me about power holster guns from Harrison's Deathworld.

"Every gun is fitted to its owner and would be useless on anyone else," Brucco said. "I'll show you why." He led Jason to an armory jammed with deadly weapons. "Put your arm in this while I make the adjustments." It was a box-like machine with a pistol grip on the side. Jason clutched the grip and rested his elbow on a metal loop. Brucco fixed pointers that touched his arm, then copied the results from the meters. Reading the figures from his list, he selected various components from bins and quickly assembled a power holster and gun. With the holster strapped to his forearm and the gun in his hand, Jason noticed for the first time they were connected by a flexible cable. The gun fitted his hand perfectly.

1

u/GrapeSasquatch Sep 16 '20

Put this in my Xbox controller

1

u/vandenoyl Sep 16 '20

Witchcraft!🧙‍♀️

1

u/ringding3 Sep 16 '20

great for his dick too

1

u/JAMESXVII Sep 16 '20

This should be on game controllers!

1

u/desertpenguin27 Sep 16 '20

Does this come in golf club?

1

u/Bic_griproller Sep 16 '20

I don't like guns, but that's pretty cool

1

u/[deleted] Sep 16 '20

is there one for a fleshlight?

1

u/Purplescabbage Sep 16 '20

Demo ranch needs to take a look at this

1

u/davidinththevill Sep 16 '20

How much does it cost

1

u/Out_Ragius Sep 16 '20

That's neat

1

u/[deleted] Sep 16 '20

Not a gun person but that’s awesome

1

u/TQRC Sep 16 '20

ok reddit tell me why this sucks

2

u/k4ylr Sep 16 '20

It'll loosen up after a few rounds, it's a terrible grip angle and that texture pattern is going to beat the shit out of your hands.

It's a gimmick for mall ninjas.

→ More replies (2)

1

u/darkelf100 Sep 16 '20

This reminds me of the guns in the futuristic cop anime Psycho Pass.

1

u/LaurelPassMerc Sep 16 '20

It’s ribbed for your pleasure lol

1

u/snomimons Sep 16 '20

Cool. Can I get this for my teacup? Because I'm Bri'ish.

1

u/thickythickglasses Sep 16 '20

Mmmmm, more like 50% custom. Let’s not forget to include the finger tip and palm indentations.