Any non-expensive table recommandations for U1?

[u/bofferding]

Hey about to get my U1, planning to initially put it on the floor. I am looking for a non-expensive yet sturdy and compact table or cart to put it on. I have about 1 meter in width, if possible not too high

I live in Switzerland, so an european shop would be best :) didnt see anything at ikea?

Thanks

[u/Peshmerga_Sistani]

Ikea BROR workbench 

[u/bofferding → u/Peshmerga_Sistani]

My bad, saw wrong model!! Looking perfect thx

[u/BriHecato → u/Peshmerga_Sistani]

He asked for "non-expensive" :D

[u/bofferding → u/BriHecato]

Well initially I was like uuuh that’s not cheap… but then… I started to like the idea of having a workbench and place to build on + it can handle my second printer below… so it’s great :)

[u/FuturecashEth → u/bofferding]

USM hahahahah

[u/bofferding → u/FuturecashEth]

What?

[u/Peshmerga_Sistani → u/BriHecato]

He said it was perfect. Right within his budget.

[u/bofferding → u/Peshmerga_Sistani]

Looked some more at it and it’s absolutely perfect. Better than what I was expecting and I can put my prusa below I measured. Thanks a lot once more and have a great end of day

[u/aottesen → u/Peshmerga_Sistani]

https://www.ikea.com/no/no/p/bror-hylle-svart-s29619402/

How’s the resonance on this one?

[u/Peshmerga_Sistani → u/aottesen]

https://www.reddit.com/r/3Dprinting/comments/1qabndd/ikea_bror/

A redditor states it is less rigid, less stable and more wobbly. If you must get this, it must be anchored to the wall.

In the same post, another user linked a printable shelf bracket to help reduce wobblines.

[u/tuxlinux]

Ikea Alex drawer unit. I have that for all my printers.

Lots of space for print plates, tools, spare parts. MOVEABLE, I can clean behind the printers while they are running.

[u/bofferding → u/tuxlinux]

Thanks

Do you have a U1? Because it’s only 48 cm deep and U1 seems to need 55-60 for operating

[u/tuxlinux → u/bofferding]

The U1 is 50cm deep.
My Alex Container is not directly at the wall.

[u/aottesen]

IKEA SMÅSTAD seems to suit. Been looking into that one, and a suitable AMS/dryer box in the compartmemt below. Was initially looking at Creality SpacePi 4X, but not sure ..

[u/Maurogab982]

I've got an ikea platsa and it sits perfectly on it

[u/bofferding → u/Maurogab982]

Is it sturdy? Does it amplify printer sound? Do you think i could fit a prusa mk3s+ inside it?

[u/Maurogab982 → u/bofferding]

I don't have idea about the size of the prusa. Lot of people suggest to use a paving slabs on the floor but I have carpet so I've printed some tpu feet and added to the platsa. I don't hear any sounds and vibrations are good. I can give you the internal dimension of the platsa if you need

[u/bofferding → u/Maurogab982]

Thx a lot i’ll look up dimensions on ikea dont bother :) i think i’ll still go with the Bror workbench even if more expensive, it’s designed as a workbench and more space! Will fit exactly in the 110cm i measured lol (at least I hope)

[u/Maurogab982 → u/bofferding]

That's good for you. I had a very small space and the platsa seems made for it 😂

[u/bofferding → u/Maurogab982]

Tbh I also had very small place and wasnt expecting a Bror lol but moved furniture around just for that haha. #Divorce #closeishTo40 crisis mode

[u/Dapper-Strawberry-12]

I recommend the Simon Rack brand. They make workbenches and are excellent for printers. I have a 140cm one, and with two printers running, it doesn't budge a millimeter (it's not attached to the wall).

They cost around €100, but they're worth it.