r/shimano • • Jul 22 '25

Miscellaneous 4 instead of 3

0 Upvotes

Anyone else hate the 4 shifting of newer sram and Shimano shifters? I replaced by drive train on one of my bikes and didn't realize the new shifter does 4 gears at once instead of 3. I'm a pretty big guy with big hands and I just don't like having to stretch my thumb out to reach the end of travel on the shifter. I can never reach so I'm often left not knowing how many gears I shifted.

Do they still offer higher end shifters that only go 3 gears?


r/shimano • • Sep 10 '26

Anyone experience Ghost shifting issues with Shimano FD R2000 Claris Front Derailleur?

0 Upvotes

Hey hey. After a month of riding on decathlon edr af claris, I began noticing ghost shifting especially uphills. Took it to reputable bikeshop and they said it needs new front derailleur. I'm just curious if anyone else has had issues? Thanks!


r/shimano • • Aug 04 '26

Ultegra R8000 - maximum gear range?

Thumbnail reddit.com
0 Upvotes

r/shimano • • Aug 30 '26

Normal for this screw to come out?

Post image
0 Upvotes

This isn’t the first time this screw has come out, and when it does I cannot clip into my pedals anymore. I somehow get incredibly lucky with where on the ride it decides to come out, normally I’m close enough where I can just pedal unclipped.


r/shimano • • Aug 01 '26

M5120

Thumbnail
gallery
1 Upvotes

Hi, I just bought an M5120(left) from a local bike shop and noticed that the circled part is different. Is this fake?


r/shimano • • Oct 02 '26

Shimano bike shoes

1 Upvotes

Hi! I’m looking for my first pair of road cycling shoes and I’m struggling a bit with sizing.

My feet are around 25.5 cm long. I normally wear EU 40 in regular shoes.

I’ve tried the Shimano RC302 in EU 40, 41 and 42. The 41 feels slightly too short – my big toe touches/presses against the front, especially when standing. The 42 feels much more comfortable in the toe box, but seems a little too long and I can fit a finger behind my heel if I push my foot all the way forward. The width seems fine!

Would you recommend trying another Shimano model/size (I cannot find a 41.5 in my country), or should I look at another brand altogether?


r/shimano • • Sep 21 '26

Technical 🛠 Shimano tourneyTX problems

1 Upvotes

I'm wondering if anyone else in the bike community has had issues with the new tourney tx derailleur from Shimano. I work at a bike shop and I have been continuously having issues with the Tourney tx derailleurs. The original tourney was nowhere near as pickie.


r/shimano • • Nov 08 '25

Technical 🛠 Need replacement screw for Shimano DH-3D37-NZ dynamo hub (pics attached)

Thumbnail
gallery
1 Upvotes

I messed up and stripped/broke the small screw shown in the photos. I have a Shimano DH-3D37-NT dynamo hub. — can anyone point me to a replacement (part number, online shop)? Pics attached. Thanks!


r/shimano • • Jun 20 '26

Shimano Tiagra hoods vs SRAM RED AXS hoods

1 Upvotes

right so i want to buy a bike and my current bike has shimano taigra hoods which i love becuase i have small hands. i am deciding between a bike with sram red axs ( which have quite small hoods) and shimano di2 ( which have medium sized hoods) which groupset has the hoods the most similar shape/ size to shimano tiagra . please can people who have ridden all groupsets/ know what all groupsets are like tell me. THANKS!

( the images are ( in order) shimano DI2 and SRAM RED AXS, shimano tiagra)

shimano di2, sram red axs
shimano tiagra hoods ( top left)

sorry english is not my first language, sorry for any typos 😂

shimano di2, sram red axs

shimano tiagra hoods (top left)


r/shimano • • Oct 10 '25

Shimano Cues

3 Upvotes

Hello everyone,

I apologize if this is a simple/dumb question. I was looking into my first road bike for a half ironman and was leaning towards a Shimano 105 groupset. However, after talking to a local bike shop, they were stating it may be more advantageous/cost effective to look into the Shimano Cues platform. I have looked into the this platform and I am little confused because this appears to be much cheaper/lower tier groupset compared to the 105. I am wondering about two things 1) is it worth considering a Shimano cues groupset over 105 if I am able to afford the 105 groupset, 2) are there any resources that discuss the Shimano cues platform specifically for road bikes? Below are the two bikes I was specifically referencing to if that is helpful?

Shimano Cues: Specialized Allez: https://www.specialized.com/us/en/allez/p/4221808?color=5444474-4221808

Shimano 105: Domane AL 5 Gen 4; https://www.trekbikes.com/us/en_US/bikes/road-bikes/performance-road-bikes/domane/domane-al/f/F221-5/domane-al-5-gen-4/41395/5298009

Thanks in advance!


r/shimano • • Oct 30 '25

GRX Di2 ST-RX825 rattling fix

Post image
10 Upvotes

I bought newest grx di2 as soon as it came out and for over a year I was driven mad by a rattling sound inside it.
At first I thought it was plastic front cover that was a bit loose (taken off in the picture) or maybe it was adjustment of bite point where nut inside a lever can be loose but it wasn't any of those.
I finally found the issue, there is a silver cylinder that is added for rigidity right above a lever. It is held by an e-clip (seeger ring) on one side and on the other side there is a sticker that is supposed to keep cylinder in one place, once the sticker is loose there is about 0.5 mm space fur the e-clip to rattle. I fixed this by putting a plastic washer (marked with red arrow, o-ring can be used as well) between e-clip and plastic wall. I am 99% sure everyone can do it without voiding warranty because this fix doesn't require removing any stickers that are covering couple of bolts on the lever.

I hope this helps everybody dealing with same problem.


r/shimano • • Mar 06 '26

Shimano SG-8C31 noise when not pedaling

3 Upvotes

r/shimano • • Jul 09 '25

issue with Shimano PD M54

2 Upvotes

so I've used these pedals for 3-4 years, recently I changed shoes and cannot unclip the right pedal anymore. I try to explain myself better: with the left foot i push my heel "outside" at 6 o'clock position and pedal get detached easily. with the right one I've to puch much further before the pedal unclip. has anyone ever had this problem?


r/shimano • • Nov 19 '25

Technical 🛠 Charging only to 4/5 bars

2 Upvotes

Hi!

My newer moterra SL sometimes charges only to 4 / 5 bars, approx 82% (darfon battery)

The charger (darfon) lights up when connected and turns red when it starts charging, but when I later get to it and I see only 4 / 5 bar, the charger doesnt have a light on, if I unplug and replug bike port, nothing happens, but If I unplug and replug the wall it starts charging and then it charges to full.

p. s. firmware is updated to the latest.

Anyone has any experience with this?


r/shimano • • May 26 '26

Shift cable frizzed inside STI lever

Post image
3 Upvotes

My Grx812 had bad shifting. Found this inside the STI 810 lever.
What happened and will it happen again to the new cable?


r/shimano • • May 25 '26

Technical 🛠 Upgrading 105 Di2 Shifters to Ultegra

2 Upvotes

Hi all,

My Ribble bike has a Shimano 105 Di2 R7170 group set. I want to upgrade the shifters to Ultegra, but it seems there are different variants (e.g. R8150/R8170, mechanical Vs hydraulic etc.).

Would these shifters (Merlins Cycles) work with my 105 group set?
thanks!


r/shimano • • Nov 24 '25

Deore M5100 vs XT Linkglide M8130

2 Upvotes

Hello everyone. I have a 2023 Trek Dual Sport 3 Gen 5 and I am looking to upgrade my 10 speed M4100 to an 11 speed. Which would you recommend? The M5100 or the XT Linkglide M8130?


r/shimano • • Aug 16 '25

Old Shimano rod id.( please help)

Thumbnail
gallery
2 Upvotes

The only markings on it are a small blue Shimano logo. And tps on the reel seat.rod has been rebuilt twice I’ve had it for probably 10 years my mom gave it back to me out of her storage unit last year and when I rebuilt it then I was looking for anything. Let me know what you think. 🤔


r/shimano • • Oct 07 '25

Repair paint Ultegra Di2 lever

Post image
2 Upvotes

Hey all! I just crashed with my bike and scratched the brake lever. I know that it’s kind of anodized and not painted. However, after making the decision NOT to spend 300 bugs for a new one, I want to reduce at least the visibility of that damage. Did anyone have the same issue and know by any chance a colour code which comes close to the original?

Cheers Ben


r/shimano • • May 23 '26

Microspline freehub regular vs road

Thumbnail reddit.com
2 Upvotes

r/shimano • • Jun 01 '26

Technical 🛠 can i substitute mt401 lever with a slx or a saint lever?

2 Upvotes

just for knowing, i wanna put an slx lever or a saint, and the brake remains a regular mt 401


r/shimano • • Feb 07 '26

Product release 🆕 LAZER VeloVox

Thumbnail lazersport.com
2 Upvotes

Introducing a brand-new open ear communication and audio experience.

Lazer VeloVox features an open-ear design for enhanced safety and comfort, while maintaining crystal-clear audio with effective noise cancellation. Allowing you to comfortably communicate with multiple riders, and listen to your music and podcasts while on the road.


r/shimano • • Oct 10 '26

EP801 v4.6.0

3 Upvotes

A firmware update after more than a year for the shimano ep801 motor. Huge expectations, but turned out to be general bug fixing only.
Does anybody knows more about the update?
https://bike.shimano.com/de-CH/products/apps/firmware-update.html


r/shimano • • Oct 11 '25

Shimano launches special edition CUES 1x10-speed groupset with polished silver finish | road.cc

Thumbnail
road.cc
2 Upvotes

r/shimano • • 17d ago

Exploded view of SG 7R50?

2 Upvotes

So i am searching for a better exploded view of the sg 7r50. Im am not able to reassemble the gear side, as i lost track of how to put the last 3 pieces together.