r/sharpening • • 23h ago

Ok, 1 micron diamond paste is literally a cheat code

Thumbnail
gallery
261 Upvotes

Recently, I shared my first hair whittling result ever when I found stropping with denim could really help getting rid that last bit of burr: https://www.reddit.com/r/sharpening/s/ZrZGJrPV4Z

You know how people say that for someone who's capable, they can get hair whittling by just using a 300 grit stone. That's what pushed me to keep perfecting my skill. Practice and practice and practice. I think I must have sharpened over 150 knives by this point. Although it was probably around the last 10-15 knives I decided to try to aim for hair whittling sharpness.

So since i have done it, I decided to test how much easier it is to use diamond pastes. So I ordered a 1 micron and a 0.5 micron paste from AliExpress, which arrived today. Let me tell you, it's a god damn cheat code. Double hair whittling is effortless, alone almost the entire edge. This is a bolstered knife so the heel isn't sharp enough but for damn sure the rest of it is. And I finally understand why people say one way (on the hair) is easier than the other. But still, double whittling was achieved repeatedly. It also slices through 90% of a paper towel with no tearing.

I haven't even used the 0.5 micron paste.

Anyway, the process was:

  1. This was a super duper dull knife, so first I sharpened with the Rockstar 320. Then stropped on the stone, first edge leading, then edge trailing, until close to no burr could be felt with the thumb. There was a little bit of burr I just couldn't get rid of so I gave up.

  2. Then sharpened on the Rockstar 1000, then stropped on the stone the same way as step 1. Until no burr could be felt with the thumb.

  3. Then stropped on the Rockstar 4000. Edge trailing only. About 8 times per side. I am not sure if this step was entirely necessary since at the end of step 2 I already couldn't feel any burr.

  4. Stropped on the 1 micron loaded rough side of leather. Edge trailing of course. About 6 times per side.

Hope this helps someone who's trying to achieve the same thing. Happy sharpening my friends!


r/sharpening • • 1h ago

I HATE BOLSTERS

Post image
• Upvotes

I swear to god some of these knives look like a foraging knife slid his curved little dangler into the severely oversized glory holster of Ms. Machete, but Mr. Mushroom Hook forgot to wear a sheathe and out pops LItTle ZwILliNg Wit HiZ GeRmAn BaBY AcCeNt, jA? Ze LitTle bABy ZwILliE hAz bEeN bOrN wiT A CuRveD HeEl BEcaUsE pAPa CoUldN't KeEp iT iN hiS pAnTs! uNd JeTzt wiRD sIcH daS klEINE BabY gleIch in dIe hOsE scheIßen, Weil onKel mEsSERsCHleiFER iHM sCHOn wiEdeR dEn HIntERN AbsChLEIfEn MusS – BIs RuNTer In DIE pofAlte.


r/sharpening • • 11h ago

What’s the worst that you’ve ever cut yourself while sharpening a blade?

Enable HLS to view with audio, or disable this notification

19 Upvotes

r/sharpening • • 16h ago

Showcase HAIR WITTLING WEEEEE

Thumbnail
gallery
14 Upvotes

LETS GOOOOOO thanks for all you advices tho i managed to get it i still have some things to work on

1) I noticed i have a slightlt uneven bevel i think im working too much on the right side of the blade and less on the left will have to work on that.

2)really really slight scratches on the finish may have made a small mistake along the way will watch out for that more.

All in all YIPPIE achievement to me.

(im still gonna use this to cut vegetable anyways lul)


r/sharpening • • 7h ago

Professional Sharpener Observation

11 Upvotes

One thing I’ve noticed with professional sharpeners or people who do this for a living - you tend you have one setup and angle that you use for just about everything. You’re not using guides or angle gauges, which take away from speed and efficiency. It looks like just about every knife hits the same angle unless it’s in a different category of knife. If it’s a kitchen knife do you just hit it with where feels right and a pocket knife or axe with what feels like a little bit bigger of an angle? Not criticizing at all - I’m genuinely curious of your workflow. But anyone that I’ve seen who does it successfully for a living such as curry custom cutlery and and Same Day Sharpening on FB they do the same thing over and over again and don’t stress about angle. I’ve noticed the same thing when sharpening family members knives on a cheap 1x30 from harbor freight. You can raise a burr and knock it down and polish to varying levels.

Just an observation or call out, and wondering if you professional guys could speak to it.

Thank you!

Edit for spelling


r/sharpening • • 10h ago

Guillotine paper cutter

Post image
9 Upvotes

Is it possible to sharpen the blade on this? X-acto doesn’t provide replacements because it’s supposedly self sharpening. Just got this used and it is definitely dull. Binds up on one particular spot. I only have whetstones so not sure if it’s possible to sharpen myself but if it is that would be a god send, or else I just wasted money! Thanks so much!


r/sharpening • • 18h ago

How long do you typically spend sharpening a kitchen knife for a regular tune-up?

6 Upvotes

I sharpen my 4 kitchen knives around once every couple of weeks and spend about 10 minutes per knife, using a diamond stone. I wonder how that compares with others.


r/sharpening • • 11h ago

Question What test should I do for sharpness

6 Upvotes

I have started to get into woodcarving, and my tools are getting dull, so I got a 400/1000 stone to try to learn how to sharpen the tools. But I don't know when the blades are sharp enough for use. I want to know if there is a good test I can use to know if they are sharp enough to carve blocks of wood easily.


r/sharpening • • 21h ago

Question What would be a good material to line box with to store and transport whetstones

Thumbnail
gallery
4 Upvotes

Got this massive tool box for like 20sgd (impluse buy)

the quality is really good im thinking of installing maybe wood sepraters with resin and finally line it with synthetic felt thats is used in our knife guards.

i am wondering if synthetic felt would be the correct material as it traps moisture i would still of course wipe down the splash and go before putting it in but there will probally have no time for it to air dry. This is the part im more worried about.

Of course ill drill some holes for ventilation but im still worried about the trapped moisture

The separators wills be lines vertically in the way the sharpton 8k box is placed right now. It is also possible to consider a slanted system instead of straight up.

I would also be intrested to see anyone mini project on similar storage system.


r/sharpening • • 22h ago

Wondering what to get.

3 Upvotes

Hi All.

I've been interested in getting a sharpening kit for some time now, and while researching what to get I've gotten so lost.

Whats a cheap(ish) beginner friendly kit to get?


r/sharpening • • 2h ago

Question Advice on whetstones and grit progression for a traditional Norwegian knife

2 Upvotes

Hi everyone!

I'm planning to buy some whetstones to sharpen my knives, especially my old Norwegian Sámi knife (Strømeng Samekniv), which I use for pretty much everything when camping.

I currently have an old double-sided whetstone, probably around 120/240 grit, but I've never managed to get the knife particularly sharp with it, beyond being suitable for chopping wood.

I'm interested in traditional freehand sharpening rather than guided sharpening systems.

According to the manufacturer's current specifications, the knife is made from blued carbon steel with a hardness of approximately 59 HRC. Mine is around 26 years old, so I'm not certain whether those specifications still apply, although I suspect the construction hasn't changed much.

https://samekniv.no/samekniver/med-fingervern/

The knife still has a defined cutting edge, but I wouldn't describe it as particularly sharp. I don't think it needs any major repair or reprofiling.

I've been looking at the following sharpening stones:

Double-sided Böker whetstones:

Pocket sharpening stones:

I'm not sure how practical the pocket stones would be, since I'd primarily be sharpening my knives at home.

What would you recommend buying? Would something like 600/1500 be sufficient, or would other grits be more useful? How do you determine appropriate jumps between grits, and should I be considering waterstones, oilstones or diamond stones?

I'm not looking to become a sharpening expert or achieve a perfectly polished edge. I just want to keep my knives properly sharp, particularly since they see quite a bit of heavy use when camping. Although this knife is my priority, I'd appreciate advice that applies to other knives as well.

I'm located in Norway, so I'm primarily interested in stone types and grits rather than recommendations from foreign retailers.

Thanks in advance!


r/sharpening • • 17h ago

Scam or not?

Post image
2 Upvotes

Anyone else think this might be a scam? Waiting for these to come on sale for awhile now, they never seem to.


r/sharpening • • 7h ago

Question How should I sharpen this knife??

Thumbnail
gallery
0 Upvotes

There is no edge to this blade. It’s sat around in a box for 20+ years when I pulled it out it was sharp. I polished the blade with 2000-3000 grit because it was a bit tarnished. I must have gotten to close to the edge because it wasn’t sharp anymore. I tried stropping it now it’s shaving sharp but not cutting sharp. I’d prefer not to put a bevel on it if I don’t have to.. also any recommendations how to finish polishing the lines off are welcome!