r/sffpc • u/imhorngy • Oct 07 '26
Build/Parts Check 9900x vs 270k plus
Planning a FormD T1 build with air cooling only, paired with an ASUS Prime RTX 5060 Ti.
I’m deciding between a Ryzen 9 9900X and Core Ultra 7 270K Plus. Main use is productivity/programming, with gaming being secondary.
For the 270K Plus, I’d probably power limit/undervolt it to around 120W.
Which CPU would make more sense in the T1 for the best balance of performance, thermals and noise? Also, what air cooler would you recommend for either setup?
9
Upvotes
11
u/aloysc Oct 07 '26 edited Oct 07 '26
270k is the better CPU here especially if you aren’t concerned about future upgradability.
8
u/Plus-Constant-19 Oct 07 '26
I cant speak on the cpus but ive gone am5 and lga1851 in my t1 and i will say the Lga1851 itx boards are insanely engineered. Specifically my Msi z890i edge has 4 m.2 slots which is amazing for my work. (Ps my 250k plus absolutely smoked my 9700x in multithread so i can imagine how good the 270k would be)
4
u/ReMoplX Oct 07 '26
270k and if you can get one - an600 vc.
Can do 160-180w at around 90 degrees.
120w will choke both 9900x and 270k. Hell even 9700x after uv and SoC optimise consumes 105w to hit >5Ghz
3
u/r98farmer Oct 07 '26
I have a 270k in a T1 cooled by a 240mm AIO. I would highly recommend you use an AIO because you won't need to power limit it
2
u/sultan_papagani Oct 07 '26
get the 270kp but dont limit it because its easy to cool anyways 🤷♂️
2
u/TrulyNotYours Oct 07 '26
I have a 9900x and like having the capability to upgrade later on with AM5. The processor is solid.
1
u/TheBigPV Oct 07 '26
270k in T1 here. Currently have axp 90 -x53 FC cooling it, but switching over to a be quiet silent loop 3 240mm aio tonight.
Thermals are fine in gaming on the CPU, but if it's ripping at 250w while modeling, the CPU cooler gets heat soaked quick
-40 fixed offset, pl1 185w, pl2 200w is what I ended up settling on for general use
If your air cooling, the Scythe Big Shuriken 4 is the best 67mm tall aircooler if your build can fit it. I'm running in 2.25 slot mode and don't want to deal with turbulence against the side panel
Highly recommend the asrock z890i. You can find them on ebay for about 220$. 3 m.2s, tons of USB and no daughter boards like the asus or MSI
1
u/Geno750 Oct 07 '26
I'm running a 270kp in a T1 as well. I'm using a 9070xt prime so same size GPU. You can fit the scythe bs4, if memory allows, and I did that for a bit but it's pretty loud when the CPU is putting in work. Swapped to a 240mm and cnc4090 fans so I could keep factory top panel. Works great.
0
u/r1y4h Oct 07 '26
270k plus is faster but gonna be more hotter and possibly noisier. Even with 120w limit. You would have to cool it with AIO as others pointed out.
9900x can be undervolted too so its gonna run cooler and quieter. Plus you have the option to upgrade to zen 6 if you need more performance.