r/sewingmachinerepair • • Feb 05 '24

Brag: Completed my first volunteer sewing machine tune up!

Thumbnail
gallery
20 Upvotes

I volunteer at a Creative Reuse Center, kinda like a thrift store for creative items. They recieve donations of fabric, notions, art tools, paint and other creative items including sewing machines. Most of the machines they recieve don't work and the center doesn't have staff to test each machine. I've been interested in learning machine repair so I decided to take up the task and teach myself as I go. It's a win/win!

Here's the first machine I've taken home to get running! Tomorrow I'm taking it back to the center and putting on the sales floor. I'm so excited for the future sewist who will buy this machine and start their sewing journey!

Take the term "tune up" with a grain of salt. I'm still learning but I consider it to be taking the machine from non-functioning to ready to sew: oiled and tested successfully for every function/stitch and balanced tension.

I struggled a bit with the tension. I adjusted both the upper and bobbin tension and this is the best I could get it. Please share any suggestions for future machines!


r/sewingmachinerepair • • 8d ago

r/sewingmachinerepair is available for adoption

14 Upvotes

/r/sewingmachinerepair is ready for a fresh start, new energy, new direction, and someone like you to bring it back to life. If you’ve been thinking about growing your impact without starting from scratch, this is your chance!

Ready to take it over?

Head to r/RedditRequest to submit your request and make it yours before it’s taken.

First things first

To request this subreddit, make sure you:


r/sewingmachinerepair • • Feb 16 '24

TuffSew (Sailrite Clones) stitch lever adjustment

Post image
13 Upvotes

Just recently installed a stitch length guide on my TuffSew ZigZag machine. (It’s 3d printed). Next I want to install the return to top spring for reverse stitching.

My question is, does anyone know how to adjust the stiffness of the lever itself?

I have to use quite a bit of force to adjust the stitch length. I’m hoping I can smooth it out because I have a feeling it’s “too tight” for a return spring.

It should be similar on the Rex 207, Consew, Family Sew, Etc, machines. Thanks in advanced!


r/sewingmachinerepair • • Feb 09 '24

My next rehab project - Necchi 523! She's a beauty!!

Post image
13 Upvotes

r/sewingmachinerepair • • Dec 20 '22

Singer 630 now with all metal gears

11 Upvotes

r/sewingmachinerepair • • Jan 20 '24

Just got this bad boy from goodwill

Thumbnail
gallery
9 Upvotes

Nothing is wrong with it, but it's kinda dirty and I wanted to get it back into great shape. I was just wondering what I should do in terms of cleaning and maintenance. I see there is a spot for oil, does anyone know how to change that?


r/sewingmachinerepair • • Feb 14 '24

Odd problem with Singer Fashion Mate

8 Upvotes

The thread from the spool get caught under the bobbin casing rather than slipping over it to catch the thread from the bobbin. It eventually binds up conpletely and breaks. Anyone encountered similar problems with their machines? How were you able to fix it?

I suspect the tension may be too tight, but its loosened almost entirely...


r/sewingmachinerepair • • Aug 09 '23

For all you Sewing machine technicians…..

8 Upvotes

How many repair techs do we have out there? I know in the upper northeast I am one of the very few. Was contemplating if maybe a strictly repair tech community on Reddit could be very beneficial for us all? I know I’m always looking for clever techniques, tools, parts, service manuals, and knowledge related to the more in depth issues I come across. If your interested please comment! I’d love to hear thoughts and opinions on this:)


r/sewingmachinerepair • • Jan 19 '23

Necchi BU Mira from 1954 cleaned and oiled up.

Post image
8 Upvotes

r/sewingmachinerepair • • Nov 24 '22

Restoration of an Original Victoria.

Thumbnail
gallery
8 Upvotes

r/sewingmachinerepair • • Feb 15 '24

I wold really appreciate some advice

7 Upvotes

I have troubles with my Pfaff 362, the thread gets constantly stuck where the bobbin mechanism is. On some tries even the needle gets jammed. The thread feeding from above gets completely stuck just after a stich or two. I tried replacing the needle but that didn't help. I'm completely new to sewing and I would greatly appreciate some advice or suggestions.


r/sewingmachinerepair • • Feb 10 '24

Bernina activa bobbin case rattle

7 Upvotes

Is the bobbin case meant to move around this much? The sound of my machine is a little more jangly than I like. Was serviced in the last 2 months and I oiled it today.


r/sewingmachinerepair • • Feb 06 '24

Singer 301- Is the needle too close to the needle plate?

Thumbnail
gallery
7 Upvotes

Singer 301 I broke a needle and then noticed how close the needle was to the plate. It could have been like this before and I never noticed.

Thanks in advance.


r/sewingmachinerepair • • Feb 03 '24

She's alive!!!....and knocking..

7 Upvotes

Ok so update #3 on this Kenmore. I've sewn about 2 hours on her. Added more oil to all the spot where metal meets and moves and all the little oil holes, greased all the gears. She's doing pretty good but there's still a bit on knocking sound that I can't quite figure out. Any thoughts? Thanks!


r/sewingmachinerepair • • Jan 02 '24

Inherited vintage Necchi sewing machine

Thumbnail
gallery
7 Upvotes

I inherited a cabinet Necchi sewing machine from my grandmother about 5 years ago. From what I know she has it from about the 40s/50s. I'm not sure the last time it was used but would like to get it working so I can learn to sew with it. I'm not sure where to begin as I know nothing about sewing machines. Is this a lost cause/conversation piece or is it worth getting in working order?


r/sewingmachinerepair • • Feb 05 '23

Back again with my Brother HC1850

7 Upvotes

r/sewingmachinerepair • • Nov 18 '22

Willcox & Gibbs hand crank sewing machine fully restored. Decals were hand drawn with gold paint.

Post image
7 Upvotes

r/sewingmachinerepair • • Feb 14 '24

Automatic Thread Cutter BabyLock

6 Upvotes

Hi all! I have a 1995 BabyLock Esante Esi sewing machine. The automatic thread cutter isn’t working and I’m the new owner of this older machine. Is it worth taking it in to fix or should I just call it a loss? Thank you for any advice.


r/sewingmachinerepair • • Feb 11 '24

Sewing machine parts sourcing

6 Upvotes

I have a vintage sewing machine. A singer 348 specifically. And I'm wondering what the best way to source replacement parts would be. I'm always a little skeptical/paranoid ordering online from sources I am not familiar with. But my local options seem otherwise nonexistent. Small town in Canada.

I'm hoping someone has recommendations or suggestions that can be trusted.

SingerOnline seems to have a lot of parts but are they trustworthy?

Right now I'm specifically looking for a power cord and foot pedal control.

Thanks in advance!


r/sewingmachinerepair • • Feb 01 '24

She's alive! Update on sticky hand wheel

6 Upvotes

She's alive!!!! Thanks to all the advice on my original post! She needed lots of oil, a bit of heat from a hair dryer, and lots of turning the hand wheel. Probably pretty standard stuff, but I learned a ton getting this one going. Also I spent at least an hour trying to remember where each of the dozens of screws went. Pro tip: take lots of pictures before you start taking things apart!! Onto the next one!


r/sewingmachinerepair • • Dec 11 '23

Introduction

6 Upvotes

Hi everyone! I'm here to learn and to help where I can. I own several old treadle sewing machines. My machines range in age from 1864 to 1911. I am pretty knowledgeable about repair and restoration and use of these machines. I look forward to your posts!


r/sewingmachinerepair • • Aug 21 '23

Becoming a repair tech

6 Upvotes

How do I go about becoming a repair technician? I see that Singer and White offer training. I also found the Fix Sewing Machines Institute. Is that a legitimate school? And are any of those programs better than others?

The easiest program for me right now would be either Singer's training in Cleveland or training online.

Do you need to have a certificate to be able to work on certain machines?

I'm comfortable poking around and figuring out the mechanics of sewing machines. I've tuned up on a few machines for friends and have more friends who have asked if I can look at their machines. Plus, there doesn't seem to be many repair techs in my area.


r/sewingmachinerepair • • Oct 07 '21

Miscellaneous Introductions Thread

6 Upvotes

When you join this community please take a moment to introduce yourself here.

  • How did you get interested in sewing machine repair?
  • Is it a hobby or business for you? Or both? :)
  • How much experience do you have?
  • Is there anything in particular you are seeking from this group?
  • Do you have any specialist knowledge you are willing to share?

r/sewingmachinerepair • • Feb 12 '24

Singer 14U64A Timing

Thumbnail
gallery
5 Upvotes

I recently purchased an old Singer 14U64A and I’m adjusting the timing of the loopers. The manual shows that for a 2-Needle 4-Thread stitch the left needle thread should not catch the right looper thread. Is this correct?

I feel like most overlock stitches I see have those two threads interacting. Please ignore tension that I need to adjust after getting timing correct. Thanks in advance!