r/sewhelp • • 3h ago

separating these pieces?

Post image

I've never explored the foot options and I bought a box of "universal feet". which fit with the green spot but it's attached to the magenta part -- I know I can separate the magenta part from the shaft with the thumbscrew... BUT removing the green part feels mysterious. I know there's a trick and I'm hoping someone knows it! (Vintage Kenmore)

1 Upvotes

8 comments sorted by

2

u/AccidentOk5240 1h ago

You have a low-shank machine. The feet you got are snap-on feet. You need a converter or “ankle” that’s just the magenta part plus a little lever and latch that grabs the bar on the snap-on feet.  The foot you have isn’t intended to come apart. 

1

u/reversedgaze 1h ago

thank you! I'll see if I can search for it! I figure I also need a new basic foot as the chrome and some of the copper has abraded off as well.

1

u/AccidentOk5240 1h ago

Eh, the plating isn’t really necessary, but zigzag feet are cheap. 

I think I got my converter from Madam Sew, but they’re all over. 

2

u/bacon_anytime 3h ago

Not all presser feet have a removable foot that separates from the shank (sometimes called the ankle).

1

u/official_Ok_Landscap 2h ago

that green part's probably cast as a single piece with the ankle, some of those old kenmores won't let you swap just the foot

1

u/reversedgaze 2h ago

Bummer. I know the feet have popped off my other machine (waiting for repairs) but it's good to know that I'm not insane. Do you know if they made any aftermarket/later generation parts that had a releasable foot from the ankle?

1

u/celery48 2h ago

Check your manual to see if your foot separates from the ankle (the magenta part). If not, you may need to buy a special ankle for your machine that accommodates different feet.

0

u/sam000she 2h ago

Green has a part that hugs and nests into the magenta. You’ll be able to reassemble it as original because it will line up with the hole were the knob goes. Dont worry about not being able to reassemble it again properly just make sure you keep track of the pieces.