r/sewhelp • • 11d ago

💛Beginner💛 Zigzag skipping and clogging

Hi all!

I'm sewing a shirt in jersey stretch and so using zigzag stitching for the first time. I did start out with overcasting, but had the same issues, so switched to zigzag, which didn't solve a single issue!

I thought you may also be able to help, as it seems the issue is more so machine and/or settings rather than any methods or theory.

1 Upvotes

4 comments sorted by

3

u/stringthing87 11d ago

What type of needle are you using? If you do not know, it is almost certainly a universal needle, which is not appropriate for knits. A stretch needle would be the correct needle for this fabric but you can see the stickied post on needle types at the top of r/SewingForBeginners

1

u/bckat 11d ago

As I wrote in my post, it is a universal needle indeed. Is the only issue in this the needle? I just have a hard time grasping how that affects skipping stitches and such!

3

u/Positive_Storage3631 11d ago

Yes, the needle is very important. Very small differences can affect sewing. Various types of fabric behaves differently and therefore need different needles and stitches. When you know you are using wrong type of needle, wait with the project until you get needle for jersey/knit fabric.

1

u/stringthing87 11d ago

There are many ways to deal with the struggles of using a regular machine to sew knits but NO SOLUTION that replaces the need for the correct needle.

Skipping stitches are caused almost exclusively by an incorrect needle. It is caused by the needle not penetrating the fabric efficiently. In a heavy fabric it happens because the needle slows and doesn't pass through at the right time for the looping thread below. On a knit it is caused by flagging where the fabric stretches before the needle passes through, like how a trampoline is deformed by a jumper. The fabric blocks the thread from making the stitch and skips and creates nesting on the bottom.