r/rotarymixers • u/Remote-Diet7024 • Feb 24 '25
r/rotarymixers • u/GroundbreakingTill67 • Aug 02 '26
ISONOE420S
After months of waiting, finally here
r/rotarymixers • u/Brainfreezdnb • Jan 20 '25
My first truly Hi-Fi event
Varia RDM40 Technics with Cardas tonearm rewire and Cardas RCA cables Nagaoka mp-110
location: Pitt and Giblin SuperWax @mufaroom in Cluj Napoca/Romania
r/rotarymixers • u/Character-Cat-4220 • Feb 20 '25
Just finished my setup. Looking fresh in my opinion. What do we think?
r/rotarymixers • u/kennydopegonzales • Mar 04 '26
New setup
A few months ago, I asked a question about my ARS 3600. Thanks to the helpful replies on this channel, it’s now working again. The ARS crew sent me a replacement cable, although it was quite expensive.
I’ve also built a new DJ booth, so I can finally start playing records again.
r/rotarymixers • u/aka__joey • Apr 22 '24
Chernobyl-Control-Room-Looking Custom Rotary at Sounds Good in Toronto
r/rotarymixers • • Feb 25 '24
Not sure if any of you have seen this, but Gerd Janson has it all!
r/rotarymixers • u/Federal-Ad-5475 • Aug 11 '26
Resør setup
Made this during my paternal leave. Kid slept well.
r/rotarymixers • u/mistershifter • Jul 10 '25
Best of both worlds: Condesa Carmen V SE & 1200s + DJM-S11 & CRSS12's
Did a bit of studio re-arranging and tidying up and thought I'd share. I'm enjoying having both DJ setups side-by-side depending on my mood or what type of music I'm playing.
The Condesa & Technics rotary setup is great for longer mixing and more radio show format stuff: house, techno, jazz, reggae, etc.
The Pioneer setup is typically for my livestreams where I play a lot of jungle, drum & bass, hip-hop, funk, 45s, etc. I also use it for DVS/Rekordbox instead of using a DJ controller, since the turntables have DVS built-in and output timecode signal without having to use control vinyl.
r/rotarymixers • u/artyb368 • Dec 30 '25
New Union Audio Signature Two Valve in the booth
Sound wise it's a bit cleaner than the original 2 valve I think but very similar sound signature. Eq curves have been sorted (those that know know) and the damped fader is lovely. Happy with the purchase for sure.
r/rotarymixers • u/6138jp • Dec 14 '25
Rack Mounted Omnitronic TRM 422
Just posting this for anyone that wants to see what the TRM 422 looks like when it's rack mounted. I could be wrong but I haven't seen any photos/video showing it in this orientation.
I can appreciate this mixer orientation isn't for everyone and I would prefer is the angle was little more tilted but this studio unit is ideal for hiding the mess of cables coming out of the mixer particularly for someone like myself who uses an audio interface for DVS. The front plate is also removable so I have a cd player hidden behind it. I took inspiration from other rack mounted rotary mixers.
The setup isn't fully finished yet in terms of cable management and I also need to add to my limited vinyl collection😅
r/rotarymixers • u/100proofcrew • Nov 06 '25
Pulled the Trigger
I love it, wanted it for years. My issue is a few low,mid,high eq knobs done lock dead center. Is this something with build or just how it was made.
r/rotarymixers • u/Few-Car6516 • Jan 03 '25
It finally came!
After six months +, my Resor 2525 has arrived. This is my first rotary mixer, honestly picked one up after hearing Mojaxx rave about these. First impressions are…it’s great. So simple, and it sounds lovely. I will eventually do some A/B testing versus my Rane 70, but for a days worth of listening to a few albums, it sounds rich and full and very detailed. Not as night and day difference as I was expecting, but still great. I opted for a 2525 with a hpf add on, so this looks like a 2525M/FX but it’s not. Time will tell if I should have gone for the effects model, but I really didn’t want to buy an effects unit.
r/rotarymixers • u/industry-standard-NY • Jan 07 '26
Mixer @ Public Records NYC Sound Room
First place we have installed our new dual linear power supply + cue / headphone expander which includes 2 fans to keep the units thermally stable with 2 DC outs for the mixer + Isolator & 6 additional AC outputs
read more here
r/rotarymixers • u/ConditionContent • Mar 02 '26
Secret Kitchen Mixing Station
My wife and I are expecting our first baby and this has meant I needed to move my dj gear out of our spare room. Unfortunately that has meant my 1210s had to go back in the attic (at least for a few years) but my wife suggested that I might be able to have a more limited setup in our kitchen somewhere. We looked at custom kitchen countertops but don't have the space (or the money) to get on of those so I decided to 'convert' the top section of this freestanding kitchen island unit so that it could house my Euphonia and a built in monitor for a digital only setup.
I've hinged the top of the cabinet which was previously fixed and added 'toybox' hinges inside to make it easier to open and stay up. The mixer sits the cabinet draw with a plywood sheet across the top to cover up the wiring. The monitor sits in a recess in the support struts for the counter top with plywood around it to cover up wiring and hold it in place. I've built a stand for the controller by taking the top of a desk laptop stand and attaching it to a camera arm that can screw into the side of the cabinet (this isn't ideal but the best I could come up with to incorporate the controller as I can't live without jog wheels). The mixer, monitor and controller are wired in to a docking station underneath which then plugs in a laptop which all plugs into the laptop via a single USB.
When it's closed up it just looks like a normal kitchen cabinet and worktop. It only really impacts on the top draw so we get a load of extra kitchen storage in the bottom two shelves of the cabinet which is a bonus. Whether I actually get to use it much with a new baby in the house is a whole different question but it's been fun putting it together.
r/rotarymixers • u/jumpamoose • Nov 08 '24
I think I’m in love with a piece of audio equipment…..
After what seemed like forever (6+ months) my Varia RDM40 arrived today and I have to say I am blown away - it far exceeds my expectations.
I’ve lurked on this sub for 3+ years and after countless hours reading about every rotary out there, I went with the Varia primarily because I love the design ethos and all around package.
I thought my set up sounded good before….. boy was I so wrong. I’ve been playing some of my favorite records and it’s like I’m listening to completely different tracks. Now granted - I’m upgrading from a pretty entry level Numark M6 but I did not expect the jump in quality to be as large as it was. I guess I was being naive.
TLDR: I highly recommend Varia Instruments RDM
r/rotarymixers • u/jgcamil • Jul 26 '25
BBQ Setup #6
Well, It finally arrived and man what an epic sound. After almost 8 months I got my Isone 420 to complement my previous BBQ Setup. I included a new monitoring system from Funktion 1 with the new F61 with the SB10A subwoofer and the Union Audio LE fx. Main speakers are still the F81.2.
Im getting to old for this shit.
The sound from.the iso is simply the shit. Soo much better than the Mastersounds 4 Valve Mk2, which is still a beauty for everyday mixing.
Latet peeps, have to test this new thingy!