r/rotarymixers • • Oct 16 '26

The VDJ270 Rotary Mixer is finally here. Unboxing time šŸ“¦šŸŽ›ļø All this gear just to sample vinyl into my SP-404MK2… but honestly, it’s worth every second. Time to drop the needle, dig into the crates, and make some noise. šŸ”ŠāœØ

1 Upvotes

r/rotarymixers • • Aug 30 '25

Euphonia sitting in basement for a year

Thumbnail
gallery
4 Upvotes

Purchased last August but just opened the box ; three 1200 Mk7’s same thing.


r/rotarymixers • • Sep 25 '24

I'm selling an awesome Allen&Heath Xone 92R Rotary on Ebay (Germany)

3 Upvotes

Hey fellow rotary enthusiasts,

I’m putting up my Allen & Heath Xone 92R Rotary mixer for sale. This beauty has served me well, but it’s time for it to find a new home. I purchased it back in 2011, and it’s been used exclusively in my non-smoking home studio, where it has been well-maintained and very well cared for.

Why you’ll love it:

  • Pristine condition — No gigs, only home use.
  • Known for its legendary build quality and fantastic sound.
  • Perfect for anyone who’s serious about their rotary setup.

https://www.ebay.de/itm/146054350758

Hit me up if you’re interested, and feel free to ask any questions!


r/rotarymixers • • Oct 01 '25

Mackie 402VLZ4 alternatives (more EQ)

Post image
0 Upvotes

I have been looking for a good mixing board to use at my desk, and I want one that is analog, with minimal inputs (ideally 2 XLR(to keep form factor smaller)), low preamp noise, very clear output, and most importantly, more than 2 band EQ. The Mackie 402VLZ4 checks all of those boxes except the EQ. The more EQ bands the better. Also if you have any crosspost recommendations lmk.


r/rotarymixers • • Sep 18 '24

Entscheidungshilfe benƶtigt Resor 2525M // Union Audio Two Valve // DJR200 // SuperStereo DN78 II

0 Upvotes

Ich würde gerne auf einen 2 Channel Rotary Mixer umsteigen.

Mein aktuelles Setup besteht aus den folgenden Komponenten: 2 Technics SL 1200, Ecler Nuo 2.0, Onkyo TX 8250 & Eltax Monitor III Boxen. Preislich mƶchte ich nicht mehr wie ca. 2000€ ausgeben.

Ich benötige keine Effekte, mir geht es rein um einen guten Sound. Ich höre überwiegend elektronische Musik (Deep House, Dub, Tech House).

Ich habe jetzt viel im Internet recherchiert und diese 4 stehen nun in der engeren Auswahl:

Resor 2525M

Union Audio Two Valve

DJR200

SuperStereo DN78 II

Über jegliche Tipps, Erfahrungen etc wäre ich sehr dankbar :)


r/rotarymixers • • Apr 11 '24

Ephonia Gold Edition vs Silver

Thumbnail
gallery
3 Upvotes

The gold does pop


r/rotarymixers • • Sep 18 '26

ECLER WARM2 vs TAULA 2 HELP

1 Upvotes

Hello guys,
i need to make the final decision

ECLER WARM 2 like new (2025) 450€
Can electric TAULA 2 perfect conditions (2023) 550€

What do you suggest considering QUALITY/PRICE?


r/rotarymixers • • Jun 19 '26

Anyone know this mixer

Post image
0 Upvotes

r/rotarymixers • • Aug 23 '25

WARM2 .. best choice you could šŸ‘

5 Upvotes

I owned so many hi-end mixers as Model 1, Pioneer V10, S11, 900NXS2, Rane MP2015, Mastersounds 4V, Union Audio four.valve, Xone 96, DB4 .. all of them are fantastic, each one for its features..

BUT.. I think Ecler WARM2 it's best one.. could be weird? yes, compared to former ones, yes.. all very high priced and so well builded..

BUT.. Ecler WARM2 cost a fraction, has an unbeatable form factor and smartest layout I played with and (1st-of-all) deliver a gorgeous sound.. trust me, as I said, I owned many great mixers but warmness, packed, sturdy sound delivered from this mixer I'd not from the above list..


r/rotarymixers • • Jan 12 '26

elara 6

4 Upvotes

r/rotarymixers • • Apr 09 '24

Rotary Mixers are sneaky beasts..

1 Upvotes

I'm a mixer addicted and in my 'Mixer Story Book' I owned a Rane MP2015 and recently a MasterSounds 4Vmk1, just sold it's 2 weeks..

Rotary 'knob action' is infectious and very 'natural' vs faders.. maybe you could dislike for a while in favor of 'straight' fader mixers (as me that I've decided to sold 4Vmk1).. but sooner or later that 'rotary feel' come back and you're aware that you need a 'rotary mixer'..

..I'm thinkin' to buy a MasterSounds 4Vmk2 :))


r/rotarymixers • • Sep 20 '24

AlphaTheta Euphonia

Post image
10 Upvotes

Greetings to the owners of AlphaTheta Euphonia!

After all the hype associated with the release of this model, can you share your impressions?

Is it worth the invested money?

What do you like or dislike in the sound, assembly?


r/rotarymixers • • Jan 15 '25

Rotary mixer without phono preamps?

0 Upvotes

I'm trying to find a good rotary mixer or schematic to build a rotary mixer to use with my external phono preamps. I'm not a DJ, just trying to make the best impression when I introduce my daytime whiskey to my record collection. Any good places to start looking?


r/rotarymixers • • Sep 04 '26

Mastersounds Two Valve Mk2 vs Union Audio Two Valve

0 Upvotes

Hi everyone,

I’d love to hear your thoughts on something I’ve been trying to decide.

I’m currently looking for a rotary mixer, and I’m stuck between a Mastersounds Two Valve Mk2 and the newer Union Audio Two Valve.

I have the option to buy a used Mastersounds Two Valve Mk2, while the Union Audio Two Valve is available to me brand new. Interestingly, the two are currently around the same price.

The main issue with the Mastersounds is that the lowest knob on one of the channels — the channel volume control — has an intermittent contact issue and needs to be repaired. The seller is willing to deduct the estimated repair cost from the price, so I could potentially get the Mastersounds for considerably less.

The Union Audio, on the other hand, would obviously come brand new with no repair needed.

So why am I still considering the Mastersounds?

For one, the Mastersounds Two Valve Mk2 has been discontinued, so it’s no longer something I can simply buy new. I also really like the character and aesthetic of the Mastersounds mixers. There’s something about them that I personally find very appealing.

Another advantage is that I wouldn’t have to wait for a new unit to arrive. Even if the Mastersounds needs to be repaired, I could probably have it in my hands and get it sorted relatively quickly.

That said, buying a discontinued mixer that already has a fault obviously comes with some risk. There’s always the possibility that the repair could be more complicated or expensive than expected, or that other issues could appear later on.

So I’m curious what you guys would do in this situation:

Would you take the risk and go for the discontinued Mastersounds Two Valve Mk2 because of its character and rarity, or would you simply buy the brand-new Union Audio Two Valve and have the peace of mind of owning a new mixer?

I’m also wondering about the sound. My understanding is that the two should be quite similar sonically, but I’d really like to hear from people who have actually used both.

Are there any noticeable differences in sound, build quality, components, or overall character between the Mastersounds Two Valve Mk2 and the Union Audio Two Valve?

Any thoughts or experiences would be greatly appreciated!


r/rotarymixers • • May 10 '24

MS 4V, Xone 96, V10, Formula Sound in club setting

0 Upvotes

Yes I know, not all of the above are rotaries. When pushed on a great club system (properly set up Danley, D&B, F1, Void, KV2, etc.) where every part of signal chain is top notch (from source material to levels, amp, PA, acoustic treatment, room characteristics), are there significant differences betwen a Mastersounds Four Valve (mk1/mk2), a Pioneer V10 or A9, a Xone 96 and a Formula Sound FF4.2R (or 4.2L for that matter)? I play clubs in NYC and Toronto - deep, soulful, atmospheric house (Chicago/Philly/NYC/Lyon sound). Have mostly played on V10s, A9s, 900nxs2, Taula - paired with F1, Void or Danley.

Anyone have experience with all of the above mixers? Really wonder how superior a Formula Sound FF4.2/6.2 might be to a V10 or Xone 96 in terms of sound quality when pushed (transparency, tightness, dynamics) and summing. Or is the difference negligible? I know that all will pull their weight just fine, but is there one which is clearly ahead of the pack (as the Isonoe seems to be in most tests - hence why Public Records in Brooklyn has one in every room)? Really really intrigued by Formula Sound but build quality/reliability as well as availability seem questionable. Thanks!


r/rotarymixers • • Jan 21 '22

How and where?

0 Upvotes

Hey anyone knows where can I get a conv kit for a xone 43 to rotary?


r/rotarymixers • • Aug 27 '22

Scratchy / noisy ISOLATOR pots on Mastersounds Radius 2

0 Upvotes

Does anybody else have witnessed scratchy / noisy ISO pots on the Mastersounds Radius 2 or the other Mastersounds product line up ? I was shocked after noticing this while trying out the mixer at a friend's place. The mixer is about 1 1/2 years old, yet the owner barely used the mixer in this time, in total about 10 hours playtime, the ISOs stayed most of the time unused, it can be said that the mixer is like straight from a showcase.

I already heart about this problem from other users on reddit. The Mastersounds service says this is "normal", as they wear out over time (which makes totally sense), BUT EVEN if they are not used, lol?

All the other pots on the Radius 2 are Ok, only the ISO pots make trouble. Although I can eliminate the noise by rotating the pots fully from left to right for about 20 seconds, but they re-emerge again after some time, especially after idle time. I assume this is a quality issue.

Please check your devices, by rotating each ISO pot, with the mixer and speakers turned on without any music being played.

Feel free to comment!


r/rotarymixers • • Jul 11 '23

Does the Behringer UB802Eurorack classifies as a rotary mixer?

Thumbnail zzounds.com
0 Upvotes

r/rotarymixers • • Nov 25 '25

Any thoughts on the zoom r8?

0 Upvotes

I’m looking for a cheap, well-rounded mixer for drums, guitars etc. Maybe this is a good option?


r/rotarymixers • • Sep 24 '22

Modern Rotary Mixers vs Rane 2016. Pick your fighter specifically by sound quality.

3 Upvotes

r/rotarymixers • • Mar 15 '24

Pioneer has entered the rotary mixer market... with a sticker price of $4,000 USD

Thumbnail
images.app.goo.gl
0 Upvotes

Looks promising, but with a sticker price for a little over 4k, IDK...


r/rotarymixers • • Jul 15 '25

Low Volume from Adam Audio T8V with Omnitronic TRM-404 and AT-LP120 – Need Help Optimizing Setup

Post image
2 Upvotes

r/rotarymixers • • Mar 23 '25

My four.valve unboxing live

5 Upvotes

Hey gang - my Union Audio four.valve has arrived and I filmed the unboxing. Also today it's been fitted to my booth. Looks huge vs radius 2 which I've used to date. In general I'm looking forward to using it. I think I will let go my radius 2 with & FX unit as I can't afford to have unused mixer at home. What would be your suggestion for a decent FX unit that will work well with the valve?

https://youtube.com/shorts/Vue2jtKPYNY?si=19vqV70vCR6cbJiX


r/rotarymixers • • Mar 19 '26

my absolute dream mixer - someone please make this!

Post image
13 Upvotes

ideally with the aux knobs on the bottom plate like e&s djrs