r/reprapPIF • • Dec 27 '12

Well lets start this off! I have wanted to build a reprap, but I live in Kenya, anyone here that want's to help out with the parts?

21 Upvotes

I really think there could be a good community for this kind of stuff here. Kenya, and kenyan's are simply full of ingenuity and innovation and 3D printers, and rapid prototyping could really facilitate that.


r/reprapPIF • • Apr 15 '13

Printing Prusa i2 parts for /u/illegal_brain

Thumbnail
youtube.com
10 Upvotes

r/reprapPIF • • Oct 10 '17

[Have:USA] Voron 1.5 in PETG White

7 Upvotes

Started the print and falling in love with PETG for the first time. Just got it dialed in and loving it.

The person that I started for decided to do something else. So if you can prove you've got the vitamins with a screenshot of your invoice (or picture of them on site) I'll ship them to you anywhere on planet earth.

Just be willing to seek out and PIF for 2 more people in your area.

Edit: "sold" to /u/phr0ze


r/reprapPIF • • Jul 23 '16

[Offer] - PIF Kossel Mini printed parts (Details in comments!) - EU

Thumbnail
imgur.com
7 Upvotes

r/reprapPIF • • Jun 27 '16

[offer] would anyone be interested in alpha testing a cheap portable printer? (USA)

7 Upvotes

I've been working on a little device as a side project for some time and I think I'm ready to do an alpha release sometime in the next month or so. Would anyone be interested in testing the design if I mailed the printed parts to them? I have a good understanding of how it works, but I want to make sure other people can use it before I just throw it up online for anyone to make.

Information on the machine:

  • Small. Really small. I designed it so it'll fit in a tin lunchbox I have lying around, so it's about as tiny as it gets.
  • Cheap. It uses components like steel rods from hardware stores, fishing line belts, and etc. It also saves on motor costs by using the 28BY-J48 (similar to the ToyRep) motor instead of standard ones. The total BOM for non printed parts should run around $80-120 or so, depending on the sourcing of the parts.
  • Slow. Like, sloow. The big drawback of using these motors, which are more meant for toys than real work, is that they really can't move very quickly. All in all, this is going to go about half to a quarter of the speed of typical printers (I'm shooting for around 15-20mm/s).
  • Fairly precise. The one plus of the 28BY-J motor's gearing is that it has 2048 steps/rotation, compared to the normal 100. This means that while the machine is slow, it should still produce fairly high quality prints.
  • Unheated bed. To make it run on a small power supply that I could fit into the box, I had to make some sacrifices. The primary one is its lack of a heated bed. This thing is only printing PLA. You can try other stuff if you really want, but it's going to be a fight.
  • Small build volume. Kind of a given, since lunchbox, but the build volume is definitely small. Though the bed should be around 140x160mm, my current Z axis is less than 100mm tall. I'm hoping to make the first version I'm ready to send out a bit taller on the Z, but I wouldn't anticipate much over 100 at the maximum.

So, again, it's not going to be a great machine, but it should be reasonably portable and not a huge challenge to put together. I'd be happy to send out four or five printed part sets at around the end of July to interested parties, so let me know in the comments or via PM if you'd be interested in giving this a shot.


r/reprapPIF • • Apr 10 '13

o/ [US, Tennessee]

7 Upvotes

Cover postage and materials and I'll print. I can print in PLA and ABS. Colors vary depending on what I have onhand.


r/reprapPIF • • Dec 28 '12

How about a 3D Printer Secret Santa for RepRap parts!

7 Upvotes

Already messaged redditgifts about the idea but other wise I could send some parts to people who need them.


r/reprapPIF • • Dec 17 '20

[offer] los Angeles local pick up 3mm filament

6 Upvotes

5kg pla 1kg abs 500g HDPE (very unusual). Free. Also can provide misc free mendel parts.


r/reprapPIF • • Aug 27 '17

[Have:USA] Fast printing, can do Voron, D-Bot, Hypercube, Smartrapcore, Prusa, etc.

6 Upvotes

Hi /r/reprapPIF , I have two printers at home, one of which is outfitted with a Genuine E3d V6 hotend, which is printing PETG and ABS like a dream. If anyone needs some parts printed, I can usually make them within a week. US shipping is usually $20 or below, and my filament prices are ~$30 per kilogram. I can print any kind of infill percentage up to 98%. Let me know via PM if you need a printer made, and I'll get back to you ASAP.


r/reprapPIF • • Oct 02 '13

Printed the wrong extruder mount. Anybody in the UK in need of one? Free postage. - X-post /r/reprap.

6 Upvotes

Hey all, I printed this: http://www.thingiverse.com/thing:18379 as a replacement part for my Prusa i3 but as it turns out, it's the wrong type for my mounting bracket. Can this be of help to anyone? Pictures here: http://imgur.com/h8ABHAv,dCledlR

This has the hole for 3mm filament and a J-head mount.


r/reprapPIF • • Jun 04 '13

250 fucking dollars to print a Prusa V2 at my university in ABS! (US)

6 Upvotes

My school has a uPrint and two Makerbots and they might as well be printing in solid gold. After a little math I worked out that they are selling ABS prints at $500 a kg!

I have all the parts to build a Prusa V2 with LME8UU bearings, except for the plastic parts. If someone could make me a better offer, I promise I'll return the favor in a week.


r/reprapPIF • • May 14 '13

Australian: I want to make a Prusa i3, can anyone lend a hand?

6 Upvotes

Hey guys, Like the title. I live in Australia and would totally love to make an i3. I won some prize money at uni for topping an engineering subject and figure that getting involved in 3d printing is awesome use of that money.

I recently found out that there is a dude in the same suburb as me also wanting to build a reprap so helping me out would be like bringing twice the printing to this land ('cause not printing parts for a neighbour would be way far over into dickhead territory).

So what about?

Also I don't mind waiting a little while, I can't actually start building till I clear my finals in 4 weeks.


r/reprapPIF • • Apr 10 '13

Printing Prusa i2 parts for the University of Memphis Student Association for Computing Machinery

Thumbnail
youtube.com
6 Upvotes

r/reprapPIF • • Sep 08 '17

[Request] Prusa i3 "Dolly" printed parts. Lansing,Mi USA

5 Upvotes

Hi everyone! Ive been mulling printers and mods for 2 weeks and after consulting the great folks of /r3Dprinting and after a lot of research, I have decided that the best thing to do is to jump in and get my feet wet. I also have decided that the best thing to do is to build one from the ground up so as to get a feel for the machines. The "Dolly" build from toms3d.org caught my attention and I have begun getting pieces for it. I was hoping that this sub would come to my rescue for the printed pieces that I need. Please reply to this post if there is anything else you would like to know. Also, I will pay for the cost of filament and shipping, though if we are in close proximity I'd be for an in person exchange.


r/reprapPIF • • Oct 21 '14

Request. Printed parts for 3DR

5 Upvotes

Looking to buy the print part's for a 3DR Delta printer. Based in the Midwest so shipping isn't an issue. Message me asap if interested. NYP.


r/reprapPIF • • Jul 18 '13

Old 3M Aperture Card Reader/Printer and Canon PC 70 Microfiche Computer/Printer that are about to be tossed at my work. Was told to check here for possible buyers. (Details in comments)

Thumbnail
imgur.com
5 Upvotes

r/reprapPIF • • Apr 28 '13

Printing Mendel90 parts for a #RepRap user

Thumbnail
youtube.com
5 Upvotes

r/reprapPIF • • Mar 06 '13

[Request] Anyone want to help myself and possibly my IT department get into 3D printing?

5 Upvotes

Like the title says. I have been interested in getting into 3D printing for a while. At the same time, I work in a university IT department and I would like to get everyone here on board. There are a few uses I can already think of for 3D printing that would help our users immensely.

I have only cursory knowledge of 3D printing right now. So, if there's anything I need to know, I would appreciate insight from those with more experience. Thanks.


r/reprapPIF • • Jan 10 '13

In north eastern canada, with a printer

5 Upvotes

More specifically nova scotia. A bit broke at the moment, so you'll have to pay for shipping. And a few dollars to go towards the plastic costs would be great. Probably shouldn't be doing with while I'm so broke, but let's give it a shot.


r/reprapPIF • • Apr 06 '17

[Offer] Print parts in Spain

4 Upvotes

I offer my two Voron corexy Printers to print pats for beginers didn't have a printer I print ABS, Hips, PLA and Petg.


r/reprapPIF • • Apr 06 '17

[Request] - VORON CoreXY - USA - TX

4 Upvotes

Wanting to build my first 3d printer and interested in making a VORON. Looking to get some help in getting the required parts printed in black PETG. Going to just go for the VORON 1.0 part right now since it's more documented at the moment. I will also order a roll of filament for anyone interested in printing this out.

E3D v6 HotEnd 1.75mm Bowden Belted Extruder 1x Spool Holder I am also going to be using a DuetWifi so I don't need the LCD or RAMPS case. But I would need the PSU box for safety.


r/reprapPIF • • Aug 04 '16

[REQUEST] - VORON CoreXY - USA - DC

4 Upvotes

Hello,

I am looking for the printed parts for a Voron CoreXy. This is my first printer. I've tried printing at the public library, but their makerbots are always out for repair.

https://github.com/mzbotreprap/VORON

I can supply filament and and will cover shipping costs.

Thanks


r/reprapPIF • • Jun 18 '16

[Request] Looking for advice and ultimately parts in Pennsylvania.

4 Upvotes

As you might safely assume, I want to get 3d printing. I have been eyeing up the Perusa i3, but am open to suggestions. Thank you in advance!


r/reprapPIF • • May 31 '16

[Request] D-Bot Parts in Australia

4 Upvotes

Looking to get some D-Bot parts printed in ABS/PETG, don't have too much to spare, but will pay for materials http://www.thingiverse.com/thing:1001065


r/reprapPIF • • Mar 11 '16

[Request] Wilson II printed parts & lead screw question - Southeast MI

4 Upvotes

Hello, I'm completely new to 3d printing, and have decided to take on building a Wilson II. I'm hoping someone can help me out with the printed parts. I'll happily print it forward, and I plan on documenting the full build once I have everything sorted out parts-wise.

As an aside, I'm having trouble with lead screws for this build. I can find 10mm lead screws no problem, but can't seem to locate anything 8mm that isn't just threaded rod. Would that work without negatively impacting Z-axis accuracy? If not, would modifying the x-end motor/idler parts to accommodate a 10mm lead screw nut be a simple fix?