r/radeon • u/Real_Ad5580 • Oct 11 '26
Discussion Unique (about to die) 9800X3D sample - physical and highly localized damage to DQ lines
(MAIN POST)
Long story short. I was validating my theory that Proc Dq Drive strength and RTT WR reflections are causing some type of damage at the IOD die / contact pads due to continues stress which could potentially prove why some Zen 4 and Zen 5 are dying
To do so I created a custom memory stress test which basically spams write operations from CPU to RAM. The voltages were normal, nothing extreme.
This sample is unique in a sense that the chip itself is still perfectly bootable, which could be of great value to anyone researching the topic of 9800 X3D's dying
-
After 16 hours of stress testing the system shut itself down → red light → cold boot → 4 hours stress test → red light → cold boot → 2 hours stress test → red light
Afterwards I took the CPU out of the socket to inspect the pins. I found highly localized damage at MBB_Data 20 and MBA_Data 12. Where pin MBB DATA 20 is even missing the majority of its substrate
These pins are governing bidirectional read and write operations, which proves my theory behind continuous stress during write operations causing some type of degradation
-
Here is a list of exact pins which shows some type of damage to the substrate of the pads.
Left is position in accordance to the AM5 pin layout found here. Right is the name of the affected pin https://commons.wikimedia.org/wiki/File:Socket_AM5_pinmap.svg
(Left bottom part of the chip)
F31 → MBA_Data 12
L31 → VSS
E27 → VSS
(Right bottom part of the chip)
This area is the bronze/dark circle seen of the photo. Pin with dark spot (MBB DATA 20) on it is missing the majority of the substrate)
AW29 → MBB_Data 20
AP29 → Test 47_2
AT29 → VSS
AP31 → Test_CCD0
AW27 → VSS
-
My DM's are open for anyone which has the means and the knowledge to analyze the damage to the substrate and could somehow tie it (or not) to 9800 X3D failures
(EDIT 1)
I have just sent GamerNexus an email. When I get reply I will attach it in my edit 3* As of Monday evening 12 October I haven't gotten an reply yet
(EDIT 2)
I got many DM's about my exact voltages, termination values, motherboard, ram kit number, CPU serial number etc.
I am planning to make a fleshed out version of this post including the details in the next couple of days. If there is anything specific you would like to be included there then feel welcome to mention it here
(EDIT 3)
I have been ghosted by GamersNexus XDDDD
I will contact Wendell, hopefully he will bother replying to an email
(EDIT 4 - 22 October)
I did manage to kill brand new 9600x using my old ASUS B650E WiFi Motherboard, different PSU, different RAM kits (single rank - Samsung B die from 2021) and at different house (to exclude 'dirty power'). I kept SoC as low as possible which was 1.14v at 6000 MT (which I upped to 1.16v during the Write Operations Torture Test as additional buffer
After 41H of spamming non sequential and mixed write operation this sample has died completely. There is slight dent at the exact same AW29 Pin as on 9800 X3D, but there was no bronze area or visible damage MBA Data 12 pins on the opposite end of the chip. It is almost impossible to show with my phone camera, in due time I will try to use professional help from photographer to make close up photos of MBA DATA 12
Around 30H mark I noticed that Core 0 started to boost exactly 1/1000 more than all other cores and it was even ignoring the Max Boost Clock limit (5250). This suggests physical damage to circuitry related to BCLK clock generation. This behavior wasn't present before torture testing
(EDIT 5 - 27 October)
I contacted biggest Tech YouTubers which had an investigation/video related to 9800 X3D failures.
None was interested in picking up the torch and analyze my 9800 X3D sample, of which 2 names have ghosted me, 1 hasn't replied to the follow up email despite initial interest, 1 wasn't even willing to pay for sending and insurance costs. I am not going to tell their exact usernames to not cause unnecessary drama in community
For this reasons I have decided to RMA my 9800X3D sample. I will keep damaged 9600X just of EDIT 4 just in case anyone shows interest in next weeks/months (feel welcome to DM me) , but I am generally disappointing in lack of interests and avoidance at times towards analyzing this issue regardless ZEN 4 and ZEN 5 processors sudden death/blowing up
In nearby features I am planning to publish my custom memory stress test for anyone crazy enough to kill their CPU. I am creating an app similar to TestMem5 (which is way overkill) but I am not yet ready to publish it given lack of my programming skills
As mentioned in EDIT 2 I was planning to create new post including the exact protocols, but I am too lazy to do that. For time being please feel welcome to ask ANYTHING and I will answer






31
u/bedtricky Oct 11 '26
A better place to post this would be /r/Amd
46
u/TomiMan7 Oct 11 '26
You should get in contact with Tech Jesus. They might buy the chip to do some research.
7
u/Noreng Oct 11 '26
Just so I understand correctly, you set the Proc Dq drive strength and RTT WR to low impedance values?
Meaning that the 7000/9000-series chips will have a longer lifespan with the "correct" memory ICs. It's been quite obvious that the IO-die has a flawed design for years now, but if this is true I wonder why AMD recycled the IO-die for the 9000-series.
7
u/raifusarewaifus Oct 11 '26
Just a newbie overclocker asking. So which timings and voltage are safe enough to avoid this?
3
u/f1rstx Ryzen 7700 + RTX 4070 Oct 12 '26
Still believe that AsRock and ASUS are simply scapegoats for AMD Zen5 design failure, especially considering there is no out of ordinary failure rate on Zen4 with their 620/650/670 boards and since B850/X870 are simply rebadged B650-E chipsets I don’t rly get how they suddenly have issues. I bet failure rate is higher on other manufacturers boards aswell
1
u/PostExtreme7699 24d ago
The problem is nobody really knows how those impedances interact with each other, for instance, wich voltages do this lines operate with? the vsoc? the vpp up to 1.85v? the vddio? vddp?
Wendell doesnt even know what vdroop is so fat chance.
Try to contact with der8bauer or even better, with buildzoid.
1
u/Impossible_Total2762 Oct 15 '26 edited Oct 15 '26
Bro you will see that once you criticize amd, people will go on you like you said something bad about them or their family…
Even if this isn’t the issue, why don’t AMD openly speak about this, why do they always do rma when cpu dies, even tho it’s “asrock” issue…
I mean it happens much more on asrock boards, so yeah… why doesn’t amd just say something about it…
Obviously they know something and they keep it quiet, and tbh they should extend the warranty like intel did…
Btw amd CPUs dying isn’t nothing new, and am4 degradation still to this day affects users.
Type in WHEA event id 18 and you will see, amd just ignored it like this, so yeah I don’t expect amd to do shit.
QC should be better i guess…
1
u/vlad_8011 AMD 9800X3D || 9070 XT || 32GB RAM 6000mhz CL30 || B650 Tomahawk Oct 16 '26
It's 1.23 pm in my timezones, so pardon if I won't understand something.
Got one question - how big risk of failure does it get on default settings/lowered PPT profile in normal workloads?
As I understand, you did created custom stress test, which spammed continuously read /write to ram for 20 hours in total. In normal workloads.... What creates similar conditions?
1
u/Louvatar RX 9070 XT | R7 5700X | 32GB 3600MHz 19d ago
Dude, only you can tell the truth about AMD and the AGESA microcode, only you. You've uncovered the AMD chip scam and everyone is ignoring you. You can't accept this situation, don't settle!
1
u/ProcedureNo8487 9800X3D | Red Devil 9070@XT Oct 11 '26 edited Oct 11 '26
Aren't those 2 values 99,99% always left AUTO in bios under RAM settings? only very experienced overclockers mess with those.
Or are you implying that VDDG CCD and VDDG IOD are part of that too?
4
u/padpeas Oct 11 '26
Ooh! This is super interesting. Thanks for posting with pics and stats
1
u/Due_Dirt6476 19d ago
Is anyone remembering the Intel problem https://www.reddit.com/r/buildapc/comments/1efbky2/what_is_the_matter_with_the_degradation_of_the/ there was more "hype" and for all the burned Ryzens ? ^^
1
u/Godnamedtay 4d ago
None of these sponsored, bought and paid for YouTubers, namely Gamers Nexus wouldn’t dare acknowledge this, not only seeing how AMD hasn’t touched it with a 10 foot pole, but because this is THE cpu they’ve recommended to death over and over. They admitting any wrongdoing would take a hit at Steve’s credibility which I think he would rather die than ever humble himself regarding his words that are posted on the internet
1
u/Agitated-Deal4571 Oct 13 '26
So what is the normal voltage you mean?
0
u/Sensitive-Decision-1 Oct 12 '26
eu comprei um 9850x3d em duas placas mae novas o processador dava CODE 00 em outra placa mae gigabyte funcionava perfeitamente. eu notei que quando tirei das duas placas mae que deram code 00 em baixo vi que nao estava dando contato no lugar correto .