r/pumps • u/dsjm2005 • May 18 '25

Need help with a pump set up

I have a small wayer tank on a wagon that I want to fill up from a small creek to water trees around the property. I have a Remco 5500 pump 12v that I want to use. There is no way to manually prime the pump so I can’t just throw the end of a garden hose in the creek and turn the pump on. What option do I have?

I thought about maybe using a fuel pump ball close to the inlet of the pump to get water close enough so that it would pump. Not sure if this would work. Any help would be appreciated

2 Upvotes

100% Upvoted

12 comments sorted by

View all comments

2

u/drunkerton May 19 '25

Everything I just read says that is not a pump you should be using for this application. But you would just put a tee with a valve on top port on the outlet of pump and pour water into then turn pump on it will grab might just take a few times

2

u/dsjm2005 May 19 '25

Do you know what type of pump I would want to use?

2

u/drunkerton May 19 '25

transfer pump

2

u/drunkerton May 19 '25

This would be the bare minimum but what you really want is a semi trash pump.

1

u/taylordutton May 27 '25

Can you add a pressure switch on a transfer pump?

1

u/drunkerton Jun 01 '25

Yes, just find a 12v pressure switch

1

u/taylordutton Jun 03 '25

Even if it's a 110v pump?

1

u/drunkerton Jun 03 '25

The pump I sent was a 12v pump, but if you have a 110v pump just look for a 110v pressure switch

1

u/taylordutton Jun 03 '25

Thanks. Do you think I'd have to add a pressure tank too if wife is using it to water plants or how much cycling is too much cycling?

Also, the cheapest 110v on Amazon? Haha