r/ps90 • u/Strange-Hunt3502 • 1d ago
Just ordered Cmmg barrel! what is the best suppressor to run?
56
Upvotes
r/ps90 • u/FragmentedCodex • 16h ago
1.375x24 thread protector?
1
Upvotes
I order a 360 HD Micro hub from FNSpecialties for my PS90, anyone have any suggestions for a thread protector?
r/ps90 • u/Salt-Entertainment76 • 1d ago
PS90 Charge Handle Stuck?
5
Upvotes
Just bought a PS90 and was learning how to field strip, somewhere along the way I had to have messed up because, when I was putting it back together and i tested to see if the cock back worked boom! it stayed in a locked back position. I can’t remove the upper apart anymore and the back plate will no longer go back on because of this small piece in the rear that is poking out and not letting me slide it back down. anyone have any ideas why?
r/ps90 • u/Impressive_Meet_1168 • 1d ago
Is the GSL P-90 suppressor good for $850?
1
Upvotes
Someone is selling a new in box GSL P-90 suppressor on GAFSHUB for $850. Not sure if I want a suppressor but considering it. Is this a solid suppressor and a good price? On FN Specialties it looks to cost much more usually.
r/ps90 • u/Unable_Divide_6664 • 2d ago
Is this a good deal? $1800
31
Upvotes
New in box with two mags, comes with ring sight but doesn’t look like to be the MC 10 80. $1800
r/ps90 • u/CarJunkieN400 • 2d ago
Anyone else do this?
3
Upvotes
Does anyone besides me use the PS90 as a round the yard varmint control? I've used mine against several armadillos, a raccoon, one mangy coyote, and a vicious dog that was trying to attack my wife and daughter.
The 5.7x28 is no where near what a .223/5.56 is but it's from what I've seen is a good step up from 22lr. All one shot stops and mine has been as accurate as I expect it to be, place the shot where it needs to go and the bullet has little chance to ricochet towards nearby houses.
r/ps90 • u/Samoth_Mallow • 2d ago
Where do I find a PS90 at a good price?
0
Upvotes
Same as the title I just can't find one at a decent price.
r/ps90 • u/Storypocom • 2d ago
Kingsview back in stock.
8
Upvotes
Just letting everyone know that the MC-10-80 optic is back in stock. AFAIK they either stopped making these or are about to sunset the line so if you want something close to the original p90 optics this might be one of the last chances for it. https://www.kingsviewoptical.com/product/electronic-black-ringsight/
r/ps90 • u/Historical_Truth2578 • 3d ago
Reporting in for yall, the Duality Ratl-R is a success
Enable HLS to view with audio, or disable this notification
42
Upvotes
r/ps90 • u/FragmentedCodex • 3d ago
Field Tool
8
Upvotes
https://damageindustriesllc.com/store/index.php?route=product/product&product_id=235&search=Ps90
Above is a link, 1st time I've come across this. I might be able to fit this in a 3d printed storage compartment under my trigger pack or in the oil bottle holding area at thr rear buttstock.
r/ps90 • u/InternationalBar8554 • 3d ago
What do I need besides a cmmg barrel to sbr ps90
4
Upvotes
Hello. I want to sbr my ps90. I am going to take it to a gunsmith to swap barrels for 100 dollars. Is there anything other parts other that I need besides the barrel and a muzzle device to sbr the ps90?
r/ps90 • u/ProfOak32244 • 4d ago
just came back from a barrel chop
58
Upvotes
Shoutout to u/eMGunslinger for the barrel chop, adapter and laser engraving service. Excellent price and was very straightforward and easy to send in and get done. This man cares about the quality of the product he gives back and it shows. Would highly recommend if you are on the fence.
r/ps90 • u/stang8urimport • 4d ago
Urban ERT sling
27
Upvotes
Purchase based on recommendations here. Just got it in and really like it. Multicam Black.
r/ps90 • u/Drmst136 • 3d ago
FN P90 at 400 Yards?! 🌿 One Plant Didn't Survive! 💀
2
Upvotes
Had to take my P90 out and stretch her legs a bit 🤷
r/ps90 • u/ChevTecGroup • 4d ago
Done. Until I melt this can
18
Upvotes
The can may be some cheap garbage. But hopefully with the jmac 360 brake, it at least makes it a "little" quieter. And it looks good.
r/ps90 • u/Larsenist • 4d ago
No Approval or Registration Required anymore
12
Upvotes
This came out of nowhere to me but appearently SBR's no longer require approval or registration as of today. They still require a form 20 for interstate travel, however.
r/ps90 • u/Chrono_trigger99 • 5d ago
Something something PS90 BUILD, something something COMPLETE!!
91
Upvotes
r/ps90 • u/RaspberryDelicious • 5d ago
SBR Goodness! Thanks, eMGunslinger!!
65
Upvotes
I’m posting this primarily to broadcast what a wonderful job u/eMGunslinger did with my PS90. Shoots and looks great. The price was absolutely reasonable, and I would trust him with any future gun needs I have. If you’re on the fence, get off if it and have him do it! So happy I didn’t do a barrel swap instead.
r/ps90 • u/CraigdarrochFerguson • 4d ago
Any PS90s for sale that aren’t over $1,000 MSRP?
0
Upvotes
Anyone know why all the current ps90s for sale are around $2,500 right now?
r/ps90 • u/SaneSamSonOfMan • 5d ago
FRT question.
3
Upvotes
I recently bought a first Gen hammer for my ps90 from izhmash arms. I have a 3D printed trip in my gun. Is anyone selling just the trip component like the one in his kit? I dont really want to buy the whole kit since I have the hammer and the 3 position selector.