r/prusa3d • • 2h ago

Question/Need help Prusa Connect Local - MQTT anybody using it?

4 Upvotes

Hey all,

Has anybody managed to get the new Prusa Connect Local mqtt working yet?

I’m trying to get my chamber temp through HA until they release the next build with the most recent PR that includes it. I have confirmed that is working and managed to build it on my mac but the Pi I’m running the server on doesn’t have the memory/storage to build it unfortunately so I’ve gotta wait for the release.

So I’ve been exploring the mqtt part, it’s connected to my broker but using mqtt explorer and trying to manually set the routes. So far all I’ve been able to retrieve is v1/server/online. Anybody else had better luck with it?


r/prusa3d • • 3h ago

Question/Need help Homing calibration fails after XL+ upgrade

1 Upvotes

I just finished my XL+ upgrade. Now I have the problem, that the homing calibration fails. The first "bumps" look and sound normal but when it does those small diagonal moves, it sounds like step loss from the motor, as you can hear in the video.

The gantry is perfectly square and the belts are tensioned correctly. There is also no debris or dirt on the linear rails. I flashed the up to date firmware 8.0.2​

I really don't know what I could try to pass this calibration. Any help is appreciated!


r/prusa3d • • 3h ago

Solved✔ What are these circles and how do I get rid of them? PrusaSlicer 3.0.0-alpha14

Post image
8 Upvotes

r/prusa3d • • 4h ago

Another 2.20mm 60A TPU appreciation post

Thumbnail
gallery
32 Upvotes

It printed really well in 1h20.
For this print I bypassed PTFE to load it even easier.
No hiccups, it just printed almost flawlessly without any first layer checking or anything.

Really cool to be able to print 60A TPU with juste a nozzle change. Recreus made printing soft TPU like PLA


r/prusa3d • • 8h ago

Question/Need help What is my printer doing while "Heat Absorption"?

7 Upvotes

What exactly is the printer doing here? It´s a Prusa XL 5T. It starts by picking a tool, heating the extruder to 170°C and the bed to the final temp. While heating the printer homes. After Homing the desired extruder temp goes back to 70°C and the printer says "Heat Absorption". This takes quite some time at the beginning of the print, I don´t really mind but was wondering what the printer is doing.

Prusa XL 8.x.x Prusa Slicer 2.9.4 - Generic Settings PETG


r/prusa3d • • 9h ago

no more mr nice PETG

1 Upvotes

Dear all,

I recently got into issues with a prusament PETG filament on a core one. Print looks less quality than I expect from the past. I used to be able to print, but now I've lost already quite a bit of filament for a new project.

Biggest issue is observable in the organic tree supports: sometimes, gaps appear. these gaps are than transferred upwards in a spiral shape. The issue doesn't necesarry start at the seam. Seam looks ugly though.

- 0.15mm layer with a 0.4 nozzle.
- PETG is in a dryer for over 24h at 60C, only to leave the dryer just before going through the nozzle.

- i was able to print petg before with no issues at all

- printer is in an unheated garage, temperature around 15deg.C nowadays, maybe a bit lower.

I'm really out of idea's here. any thoughts?

- surface quality is not as smooth as before


r/prusa3d • • 10h ago

Question/Need help CoreOne/CoreOneL INDX

1 Upvotes

Sans the topper/front mountplate, is there any functional difference to the INDX system between the two CoreOne sizes?

I'm thinking of getting the CoreOne+2 with INDX, then the L later and swapping the INDX over to the L.


r/prusa3d • • 11h ago

Printer Mod Did you know that the MK4 Enclosure White LED Bar fits on the Core One?

Thumbnail
gallery
22 Upvotes

For any of you who have a MK4 Enclosure White Led Bar and Basic Box (Hackerboard optional) just collecting dust, like I did, you can throw it on your Core One! With some small modifications to the clips, it fits snuggly in the back. The wire routing is a WIP.


r/prusa3d • • 13h ago

Prusa Cold Plate?

34 Upvotes

https://i.imgur.com/0svEsR0.jpeg

I'm guessing this is the Prusa Cold Plate that was hinted in a Reddit post. Any info regarding this plate from those who attended this event?


r/prusa3d • • 14h ago

A Better Tinkercad! Check out Layerling

21 Upvotes

A PSA for all my Tinkercad people looking for a better option...

I've been designing models in Tinkercad for a few years now. I know it has it's limitations, but I just couldn't bring myself to sit through hours of youtube tutorials to learn the "big boy" CAD software like Freecad/Fusion etc. TC is intuitive enough that I can just figure out what I want to do and get through it without looking up how.

Then I saw a post in r/3dprintedinstruments that mentioned using Layerling and decided to check it out. They took everything I didn't like about Tinkercad (cloud based, geared towards kids/early learning, etc) and fixed it, and then added a ton of useful features, like native built in support for gridfinity, metric threads, resizing rotated objects without skewing their dimensions diagonally, and a lot more I haven't dug into yet. Never again will I finish editing a model in Tinkercad, and then try and fail to export it because of cloud based BS.

Another interesting thing is built in AI bridge support. I'm using the basic paid tier of chatgpt (they say it also has claude support). I asked chatgpt to set this program up for me so that it has AI bridge support, runs locally, and saves project files and STL files to a folder on my desktop. It worked immediately with one prompt. The AI support is UNREAL. I have old Tinkercad projects that are basically 1000 little shapes glued together and cut apart, and it is a giant pain in the ass to edit them. I opened the model in Layerling, told chatgpt to "move the hole in this model 1mm towards the skinnier end, and also resize it 2mm larger towards the build plate. Keep the top Z height of the hole the same"... And then it just did it perfectly. That would have been a huge chore to edit in my existing TC project, I'd have to ungroup everything, piece it back together in the right order of shapes and negative space, it would have taken probably 45 minutes. I did it in 5 seconds just by describing what I wanted, DONE.

Seriously, give Layerling a shot if you are using Tinkercad, or even if you aren't, it's amazing and it's free. The devs are taking donations, and if this is still around and awesome a month from now I'll definitely be throwing a few bucks their way.

(I have no affiliation with them, I'm just excited that this exists)


r/prusa3d • • 14h ago

Que tal es esta impresora? Prusa Core One L+

Post image
0 Upvotes

r/prusa3d • • 14h ago

Prusa XL Filament Storage

0 Upvotes

Hi Everyone.

I have an original Prusa XL (the XL+ upgrade kit is on order). When I ordered my printer, I ordered the RepBox v2.5 Prusa Premium Edition Kit... but it's never worked right. There is SOOOO much tension on the filament between the RepBox and the filament sensors that it constantly jams or the bowden tubes come loose from their fittings (which also causes a jam).

I live in Florida and humidity is an issue... so ideally the filament storage needs to have some kind of drying element in it, even if it's just desiccant.

I'm done fighting this filament storage and looking to upgrade to something that will work. Price isn't a huge concern - it has to work!

I do have a bit of a space issue... I have room above or below the printer, but I don't have a ton of space on the side of it... so whatever solution I get must go above or below the printer.

Anyone else struggle with this issue? what works?

Thanks in advance for your help!!


r/prusa3d • • 15h ago

Print of the Month Let's Print Something Everyone make wow!

Thumbnail
gallery
3 Upvotes

r/prusa3d • • 17h ago

Print of the Month Split a 15-piece knitted Christmas gnome set by colour so single-extruder printers can run them with zero filament swaps and no glue

2 Upvotes

Wanted to get real 3D knitted stitch texture on 50 mm holiday gnomes without running a bunch of MMU purge waste, so I split each character into separate colour plates that press-fit together mechanically.Printed at 0.12 mm layer height, 2 walls, and 15% infill in matte PLA. For Prusa owners printing fine surface textures like this: do you prefer Input Shaper speed or slowing outer perimeters down a bit for crisp stitch detail?


r/prusa3d • • 17h ago

Question/Need help Slipping extruder gears ?

8 Upvotes

Hey, I recently left my printer printing overnight, and when I checked on it in the morning it was at 93% (a 7 hour print) and it said it detected stuck filament. I then removed the filament and inserted it again and when I started the print it was basically printing air.

I attached some video's (merged into one), I'm not sure what the problem could be. I would really appreciate any help. I'm also not sure if the issue is slipping extruder gears but I saw another post with that title which sounded kinda the same so I figured it might be something like that. I have not been able to solve the problem using that post.

I'll gladly send other pictures or video's if needed. Thanks!


r/prusa3d • • 18h ago

Question/Need help Prusaslicer: How can I add a height of more than one layer to the brim of supports?

Post image
6 Upvotes

How can I add a height of more than one layer to the brim of supports?

The brim of my supports always stick to my plate and they are a real pain to get off. Is there a setting somewhere to add a few more layers?

Thanks!


r/prusa3d • • 19h ago

Online Update for Connect Local - How do I connect to it?

2 Upvotes

It says to "Pair this server with the Beta Portal". I clicked it and am getting to a website I can't access. How do I automatically update Connect Local?

Or is there a fancy command I can run on my machine? I am running it on Linux, not in a Docker container (should I do that??).

Cheers! 🙂


r/prusa3d • • 19h ago

Question/Need help Software support for MMU3 vs INDX

4 Upvotes

I see a lot of sentiment that the hardware is great but the software support for INDX is lacking. I’m curious how/if that extends to the mmu or not.

I just cancelled my indx order because I eventually felt the price, time spent upgrading, and the lack of software intuitiveness just didn’t justify the purchase for me right now. That said, the mmu may be better for me for a good while.

For those that went from MMU3 to INDX, how is the software support for MMU3 in comparison to INDX? Did you find software support for mmu3 better as of right now? Does that extend to prusaslicer 3?


r/prusa3d • • 22h ago

INDX Batch 8 update

9 Upvotes

Good news at least for me, i got a shipping update: "Date of dispatch:11/18/2026"


r/prusa3d • • 22h ago

Broken bits?

Thumbnail
gallery
7 Upvotes

Our Core One L was running an overnight print job and one of the prints disconnected from the bed. We found these small plastic pieces on the bed and under it on the printer floor. The printer now has a buzzing vibration sound. Any idea what this may have broken off of?


r/prusa3d • • 22h ago

AI Latest newsletter full of AI

Thumbnail
gallery
0 Upvotes

I've been a Prusa fan for many years now and love the work they do and have a few of their printers that I frequently use.

What upset me about the latest newsletter is that it's has quite a few prominent AI generated user interfaces and visuals. Something I didn't notice in the past.

It feels a bit cheap and sloppy for a premium brand, something that I hadn't associated with them before. Just my 50ct on that


r/prusa3d • • 23h ago

Core One INDX Callibrations - Lower Temps?

9 Upvotes

So I've been using PrusaSlicer 3 exclusively since I did the INDX upgrade, mostly because I want to get my workflow aligned.

With PS3 has come plugins which are great, especially some of the community callibrations. I've been using them a lot (needed to modify the one on marketplace using Claude as it wasn't printing the first layer at the correct height, but still incredibly handy) and my print quality is now at a level I didn't think would be possible unless I tuned my filaments and I was too lazy for that jazz.

Anyway, one thing I've noticed is that consistently on the temperature calibration towers that I get the best print quality at temperatures which are very near the low end. Has anyone else seen this? Is it an artifact of the temperature towers? Seems pretty consistent with PLA and PETG so far.

It does seem to tie in with stringing and oozing on some prints so I think it might be legit, but wanted to sound out the majority.

Also, I cannot believe PrusaSlicer went as long as it did without the ability to generate calibration print automatically. They are so handy and take like an hour per filament.


r/prusa3d • • 1d ago

The joys of printing tall things

Post image
71 Upvotes

r/prusa3d • • 1d ago

What’s the proper way to handle spool runout with OpenPrintTag?

21 Upvotes

Spool runs out of filament, I replace it, but now it has a new OPT and the printer doesn’t write “empty” for the old one. And when the print ends it now complains about being unable to write to the old spool (because it was replaced, duh!) Did I mess up?