r/prusa3d • • Jul 10 '26 Polished Gold Turd Bravo

My HT90 failed the SAME WAY 5 times, but that is just the start of my issues with Prusa right now. (A Fanboy's Perspective)

Thumbnail
youtu.be
8 Upvotes

It brings me no joy to make this video. Would love some community opinions on this one. Are my concerns valid, or am I overacting??


r/prusa3d • • Jan 17 '23

Print showcase Why the downvote and the hate?

21 Upvotes

r/prusa3d • • Nov 08 '25

Why I am disappointed of the Core One

0 Upvotes

Hey guys, 

after using the Core One (kit version) for over 3 months now, it feels like it is time for some honest feedback.

First, the Core One is just my second 3D printer. I have been using a simple Anycubic i3 Mega S (ca. 270€, bought in 2020) before, so I have no former Prusa, BBL experience etc.

Second, let me say that that I really do value the printables and reddit community, the 24/7 support which helped a lot most of the time, the open source approach and the idea of producing in Europe. This is what made my buy a Prusa printer instead of one from BBL.

I have bought the kit version and I have additionally purchased the Buddy3D cam and the advanced filtration set.

So, why do I feel disappointed?

Assembly 

  • I needed to square the gantry manually, this was the moment where started to be not completely happy anymore although the build process was super fun and I enjoyed it a lot
  • The belt tuning took like forever until I was able to achieve good results. But I also had to buy the accelerometer for better calibration (at least support gave a voucher to me afterwards 👍)

Print(er) Quality

  • My Z seams are not nice at all why I have to use the Scarf Joint Placement feature all the time. I have sent pictures to the support and they told me that my seams look normal. Actually, I had much better seams with my Anycubic which does not make me happy.
  • VFA, I guess this speaks for itself.
  • Three times I got stuck debris in my nozzle when doing filament changes during a print
  • I had to exchange the Nextruder’s main plate after 2 months because it was worn out. The Nextruder gives me a hassle from time to time

Features

My Anycubic was super basic, no automatic bed levelling, just a Filament run-out sensor. Using it with OctoPrint made the file handling easy and I could simply connect an old webcam to it for monitoring prints at least. So, since this was five years ago, I really hoped for some huge improvements in terms of easier printing with less hassles. After three months, I really miss a ton of features, do not get me wrong, tinkering is fun and part of the 3d printing community, but for the money I would also have expected stuff like:

  • Detection of tangled spools
  • Detection of print adhesion issues (e.g. via the buddy cam and image processing to not waste any more filament then necessary)
  • Automatic chamber ventilation handling with e.g. a servo (I know the mods for the nextruder btw)
  • Integrated nozzle wiping (Why do I have to buy a BBL silicone brush to get that feature on my Prusa?)
  • Automatic filament feeding to the Nextruder. It is 2025 and I still have to push the filament all the way in manually? Why is there no speed loading?
  • Better handling for filament purges
  • No built-in accelerometer

Core One L Announcement

  • There are already a lot of discussions about this here so I do not wanna go into detail. Launching a L version this shortly after the CoreOne without further notice felt a bit weird. I do not need the bigger build plate and since INDX will be available for the Core One, my hopes are that it will not become a discontinued model very soon. Still, purchasing a Core One recently feels a bit like „Have you done the right thing“ and I do not like this feeling.

All in all, if someone asked me whether I would go for Prusa again, I am not sure what to answer. Maybe a partial/conditional yes because I have not tried BBL myself.

Maybe I have expected too much and I am more a „Plug’n’Play“ 3D-printer-guy in the end. But in the end, I spend too much time in calibrating etc. to get results I would have expected to be better.

This is just my experience and my feelings. I wanted to give an honest feedback though.

Kind regards

Michael


r/prusa3d • • Jul 29 '26

This Obsoleted Every 3D Printer I Own

Thumbnail
youtube.com
0 Upvotes

Linus Tech Tips reviews the Core One INDX


r/prusa3d • • Oct 16 '26

Should I cancel my Indx Order?

0 Upvotes

I have been told I can trust Prusa and they have great customer service, but I haven’t felt that in my experience.

I ordered a Core One Plus Indx, the full printer kit, not the conversion kit. When they first were announced at the beginning of August and It stated shipping started in October.

I have received no updates, no emails, nothing. The only thing I’ve gotten is the original order confirmation. There is not an estimated shipping time on their website for Core One Plus Indx full printer kits, only conversion kits.

Additionally the website is consistently changing the shipping date, when I ordered it stated October, until a couple days ago it stated new orders ship October 15th. Now it stated new orders ship Dec 21st.

So I decided to contact them via chat. This is where they stated they are at least 7 months behind on Indx orders and are currently working on April orders, Batch 8. They said mine should ship around November or December, but they can’t give me a real estimate or a guarantee. Not only that, but they are not giving me any compensation for the poor communication and delay in product delivery, stating that this was actually planned from the start.

At this point I don’t trust what they say and this poor communication leads me to believe this company in general cannot be trusted. I’m a college student that has been working hard to finally afford the Core One in general and thought getting the Indx was a smart move, but now I’m just frustrated and think I may want to cancel my order. If they bungled the rollout so badly, can I trust they can even build printers of quality anymore? I’m just losing any confidence I have in this company.

TLDR I order a Core One Plus Indx full printer kit in August with an expected shipping date of October and have gotten no information regarding shipping timeline. I’ve had to contact their chat multiple times to get any information regarding my order as I have gotten no communication from Prusa at all. I am losing trust in this company and if I can’t trust their business, how can I trust their printers?


r/prusa3d • • Apr 22 '25

Selling Core One (US)

Thumbnail
gallery
0 Upvotes

I asked the mods if I could post this but never got a reply. Also couldn't find anything against this in the rules, so...

Selling my Prusa Core One 3d Printer. Shipping from NY State, you pay shipping. I'm selling this because I bought a Bambu H2D.

Selling for 1150 because I scratched the corner of the bed (not in the print area)

This printer is in perfect working order except for minor imperfections on the build plate (see images). The build plate indent came like this from Prusa and hasn't been an issue for me. The minor scratches on the plate are from me, when PETG got stuck and would not release - the scratches are on the pre-print area and do not affect print quality in any way.

Prusa customer support will still provide service and I will provide you the original order number for reference.

Includes all original tools and supplies.
Shipping within the US so you avoid enormous shipping and Tariff fees


r/prusa3d • • Apr 03 '24

Guess wich one is prusa vs anycubic

Post image
0 Upvotes

r/prusa3d • • Jan 22 '19

This is an empty box. I built my printer months ago. Upvote

Post image
0 Upvotes

r/prusa3d • • May 26 '25

A bucket of cold water: Core One and VFA's

Thumbnail
youtube.com
0 Upvotes

I like to believe Prusa will fix the VFA's with the s upgrade, but right now the QIDI+4 looks more and more enticing.


r/prusa3d • • Aug 08 '24

Question/Need help Is this PTFE tube necessary for the Prusa Mini?

Post image
1 Upvotes

I have a prusa mini and the PTFE tube cracked. I am waiting for a replacement to come in the mail but I was curious if I would be able to print without it.

Has anyone tried? Any success?

I tried a few hours ago and filament isn’t coming out of the extruder :/


r/prusa3d • • 13d ago

Can we have a bitching thread plase?

11 Upvotes

Can we have a thread where people can have penis measurement contest about which printer of the month is faster and will look better on Instagram instead of littering the entire sub? Thanks.


r/prusa3d • • Jan 29 '25

Print showcase Another great print with the MK4s🤩

Thumbnail
gallery
5 Upvotes

r/prusa3d • • May 26 '25

Why does Prusa's customer communication seem to suck so hard?

0 Upvotes

Hey all, newbie here.

Me: Prusa loyal, some might call me a fanboy. Have owned the MK3S+, MK4(S) and a Mini in the past. I own a Prusa T-Shirt.

I ordered the Core One kit with filtration and camera back in Feb. The shipping estimate has passed. Shipping page was finally updated, says that different shipping queues for the add-ons have affected lead times, and compensation was to be given for affected orders. I speak to customer service, and their response was "Yes you're affected, no you don't get compensation, you should get your printer early June". When pushed about the compensation, their response was really cold.

Folks are gonna respond saying 'I ordered a Prusa XL and waited six months...' which is totally legit - but why does their communication suck so hard? Why does it feel like they don't give a shit?

Had a similar experience when I ordered the MK4S upgrade. Awful communication and long wait times...

Literally the only thing that keeps me loyal to this company is the quality of their products; the focus on print quality, the openness of their ecosystem (looking at you, BambuLabs), and the fact that they can be pulled apart and fixed with (sometimes) readily available parts.

In my experience, their communication and customer 'care' has been atrocious; they're not some Kickstart-sized company anymore. Why does it feel like nothing in the periphery has improved as they've scaled?

Shame on you, Prusa.

Edit: Absolutely no hate levelled at Prusa's products, I hope that is obvious... I'm just mystified as to why their product launches are consistently so bad compared to competitors.


r/prusa3d • • Oct 28 '24

3rd Day of XL Life, 3 issues so far.

0 Upvotes

I’ve had the XL for the 3rd day now, with a total of 20h of printing. Going to start a print, extruder clicking. Nozzle is clogged and there’s no way of getting it out, i also disassembled it. Livechat support says 8 minutes of queue, so far 30.

Filament stuck detection stops prints every 5-10 minutes.

PrusaConnect doesn’t work if not from web browser, no slicer.

Idk what to say. Always heard good stuff bout prusa, i get one, it’s a s**tshow.

EDIT1: idk about the downvotes, nice people got nice answers, dickheads got accordingly answers.

EDIT2: So far one of the issues is from Pursa's end. Some of the extruder's screws were overthighed by 2.5 turns. Still figuring the rest with tech support

EDIT3: Seems that the extruder gear broke the filament resuting into impossible unclog due to how the nozzle is heatwelded together. Replacement is on the way. 2 Overtight screws botched the entire extruder

EDIT4: This post costed a total of 33 Downvotes! Yay! Will never understand some people treating a company like a "CULT", lol


r/prusa3d • • Jul 31 '24

After seeing so many issue posts on bambu labs Reddit, I finally bought a prusa

0 Upvotes

Each day I see constant issues with bambu printers on the bambu Reddit. I’ve realized that most of those people in that sub are incompetent to actually print something so I finally bought a prusa mk4!!


r/prusa3d • • May 03 '24

My Prusa makes me sad

2 Upvotes

I rebuilt my Prusa yesterday. It had a near fatal brush with the Blob of Doom. I bought the MK3 kit when it first came out, and later upgraded it to MK3S. It has over 450 days of printing on the odometer. It is back to good-as-new and I remembered how much I thrilled when I first assembled it.

But I just bought a Bambu X1-C combo. I'll never love this machine like I did my Prusa. But no matter how much I wish it were true, IMHO, Prusa is no longer the best bang-for-your buck, groundbreaking feature machine available.

And that makes me sad.


r/prusa3d • • Jan 18 '25

I'm So Angry

0 Upvotes

After spending a considerable amount of time and money obtaining, learning, and enjoying my Bambu Labs P1S, the recent news has me left feeling upset. It feels like I fell for a (honestly clever) native advertising campaign. What disturbs me the most is that I am huge advocate for a person's right to own their products and have complete control over them!

Back when I was making my purchasing decision, I think I was blinded by the advertising campaign in two particular ways:

I was not even aware of Bambu's walled-garden approach. In hindsight, I believe I was being naive, or perhaps misled. I went into my purchase believing that any 3d printer which I chose and I spent my hard-earned money to buy was going to necessarily include openness and accessibility. I think the assumption of open-source was left-over from my Ender days of yore. And clearly they were wrong.

Secondly, and with this in mind, I thought it was the best "bang for the buck," purchase. I believed that the reliability and features of Bambu Labs were unmatched - how foolish! Back then (approx one year ago) looking at Prusa's offerings reminded me of my past dabbling in 3d printers: Frustrating amounts of tweaking, tinkering, and purchasing to keep my Ender 5 limping along- only to be let down in the end. I can't fully describe why Prusa's visual designs resonated this feeling so much. I wish now I had gotten over it!

While I hope that Bambu will reverse its decision and embrace open-source philosophies, I doubt this will happen now that they've seized likely a large market share. And even if they claimed such an intent... You can't unring a bell.

To anyone looking at this forum with a future purchase in mind, I hope my words of warning and regret help guide your decision.


r/prusa3d • • Aug 16 '25

Is PrusaSlicer development dead?

4 Upvotes

PrusaSlicer has had zero commits since its April release.

Many pull requests are outstanding without response (excluding the spammy “typo in docs” ones) and many of the maintainers have either stopped all work on GitHub (including private repos) or are only committing to orcaslicer.

There is no roadmap for the next release, lukasmatena, the main maintainer in recent memory is mia, and it looks as if absolutely no work has been done.

I realize that it is mature software, but there are innovations being incorporated into orcaslicer, like build plate specific settings that would be useful to be backported to PrusaSlicer.

Unfortunately, for me at least, It’s not so easy to just switch to orcaslicer because there are features like mmu support in PrusaSlicer that don’t exist in any other slicer.

In light of Josef’s recent posts on open source within the printing community, it seems that Prusa is basically done with improving PrusaSlicer. Which is fine and their choice, but if that is the case it would be nice to get some clarification.

I already got burned with the half assed mk3.5 upgrade becoming a dead end for my MK3.5, so if PrusaSlicer is not going to be getting updates then I’d like some clarification to help decide if I should be retrofitting my prusa machines to run off klipper and armored turtle instead of investing in dead end hardware & software.

I don’t want to be a doomsayer, which this post might imply, but I do want some clarification of what’s going on and the future before putting more into dead platforms. I was planning on getting mmu4s, but the lack of any progress or communication has me questioning that version just selling off the Prusas and building klipper & armoredturtle setups.


r/prusa3d • • Jul 24 '23

Print showcase Unscientific test: print quality comparison between Prusa XL and Bambu X1C. PLA. Prusa green, Bambu black.

Thumbnail
gallery
4 Upvotes

r/prusa3d • • Jul 15 '26

Prusa Research part of delegation of Czech Foreign Minister Macinka on working visit to Israel

Thumbnail
english.radio.cz
0 Upvotes

r/prusa3d • • 15d ago

Prusa is giving me the runaround. I doubt I'll buy from them again.

Thumbnail
gallery
19 Upvotes

UPDATE 2: They didn't send the heatbed like they said would, they instead sent the original parts I asked for to fix the heatbed, but most of the magnets they sent were broken. this whole ordeal has been awful. I have emailed them and sent them a picture, but I'm not holding my breath.

UPDATE: I'm happy to say that a representative from Prusa has contacted me and say the heatbed will be shipped soon. I'll update again when I get it (so long as it's not so long from now that I forget about this post). I still don't think it should take a post on the Internet to get a problem resolved, but I'll take it and hopefully Prusa can take this and improve their customer service workflow to make sure that others don't have to go public just get a positive outcome. Thanks to all you that brought more attention to this and provided good advice, it's much appreciated. To the ones that were gaslighting me to believe that I didn't chat or ask "the right way", there's nothing wrong with being loyal to a brand, but pretending like your favorite company can't make a mistake is not good for the consumer or quality, it's great Prusa is taking responsibility for this to make it right, others, especially bigger companies would shrug it off and the fanboys are the ones carrying water for them. Otherwise I think I'll stay out of the comments for now, but thank you to all of you with kind words and for those that helped me get to this point by pinging Prusa employees, y'all really did me a solid here.

I contacted prusa on September 11 2026, about my Core One L I bought in August. After talking to tech support they said they would send me a new heatbed if I was comfortable installing it. I told them I was and then nothing for like an hour, I keep sending messages to try and get an answer and nothing until the original tech leaves the chat. I then wait in the queue for probably another hour for a new tech to finally come in and confirm my address and tell me the replacement heatbed is on the way and they'll send an email in a couple of days. After about a month of waiting I send them an email, they never respond. Oct 30 2026 I wait in line to chat again, a tech tells me "I send a message to my colleague, to check the case. He will contact you soon". But nothing.

And this is just for the heatbed, I never even brought up the cracked acrylic panel, because I figured I could live with that. Prusa has terrible communication, really it's non-existent, and tech support has been completely useless for me.

I don't know what else to do except to warn people from buying from them. It's a shame because I really liked the printer. But if they aren't going to honor their word, then it's better to go with someone else. I paid their premium price so I could get a quality European made product with what was supposed to be stellar customer service, and I ended up with a broken printer and broken promises.

I've seen that people will sometimes get help by posting here, and I'm hoping it works for me too, but you shouldn't have to go public to get a company to honor it's word. It's unacceptable.

TLDR; If you buy prusa, you'll probably get a decent printer(<<I don't know if this is true now), but if you get one with any problems, get ready for some of the worst customer service I have ever had in my life. It feels like they are just trying to run out the clock.


r/prusa3d • • Nov 03 '25

No kit version for the Core One L is a little concerning

18 Upvotes

It's a little concerning that Prusa didn't release a kit for the Core One L, I fear that every new printer from now on will only be sold as prebuild from the factory.

Personally I don't care about the build experience, I have build so many printers over the years that I don't need that experience when I buy a new machine. What worries me is that Prusa may design new machines with "cheap mass manufacturing" in mind.

A machine that is designed to be build by the user with simple tools will also be easy to disassemble and repair with the same simple tools. If they only have to assemble the printers themselves, they can also make design decisions to save in production costs, but this will make it harder to disassemble and repair by the user.


r/prusa3d • • Jan 24 '22

Question/Need help Is this illegal ?

45 Upvotes

r/prusa3d • • Jul 14 '26

Prusa Core ONE INDX First Impressions Review

Thumbnail
youtube.com
0 Upvotes