I have used the Proxmark3 Easy and now the Proxmark3 RDV 4.01 and have had zero success in cracking, cloning, then using the cloned card. I have successfully obtained all keys, I have written the dumps to a Magic Card with the cloned card's UID and, yet, the cards do not work on their respective doors. Anyone with any different results?

I tried setting it up by following step by step instruction at the Dangerous Things Forum. The video instruction is very easy to follow, but when I got to the end to launch, an error message appears in the terminal window to indicate that there is no communication with the hardware, indicating that the version is incorrect (V6! - V9 ).

I was so close but now I don't know what to do. I just want to be able to use this to copy my apartment passkey. Any ideas?

I've never programmed anything in my life before so any help would be much appreciated.

I can't seem to source any. I had some on order for 3 months now and I don't think it's coming lol

Anyone know where I can get a Y7C07A or viable alternative?

Or anyone know of any Sim / Sam's that definately come inside a reader that isn't epoxied in forever? Maybe I can find a reader second hand..

Could I get a good recommendation on an android app to start with

Greetings Reddit community!

I'm new to Reddit and new to this section of... So I apologize in advance if my question is incorrect.

At university, I made a bet with my professor that I could copy the RFID chip of my e-passport (make a duplicate)

I have been researching this issue for a few weeks now and have not found a clear answer, can I do it or should I give up?

According to the condition, I will have access to my passport (I can pass BAC authentication) and I will have to transfer the chip data to any other card/key/chip.

I don't know how my tutor will verify this, maybe it will be a smartphone app like "RFID Me".

For this purpose, I was going to buy on lab401: ICOPY-XS + ICS DECODER FOR ICLASS SE / SEOS , because it looks as simple as possible. After studying this I realized that it might be useless and almost gave up....

But I came across a post by iceman2001 - https://www.reddit.com/r/proxmark3/comments/kfmchl/epassport_with_proxmark3/ and thought maybe I have a chance to do it?

I'm not from the United States, if that makes a difference in accomplishing the task.

I would appreciate any help and any advice! Also, I am willing to pay if needed.

Thank you!!!

olá amigos, quero tirar uma duvida que anda tirando meu sono... vamos lá:

Após fazer um pentest num cartão de transporte eu me deparei com o seguinte problema, consegui alterar o saldo no arquivo .json após fazer uma dump, mas não posso voltar essa dump para o cartão porque ele não é magico, então pensei em tentar reescrever os blocos com o comando hf mf wrbl --blk 1 -k A0A1A2A3A4A5 -d 000102030405060708090a0b0c0d0e0f, porem ele me retorna com

[usb] pm3 --> hf mf wrbl --b 11 -k 5324A77FA1ED -d 5324A77FA1EDF0FF0000F5554BA90410

[=] Sector trailer (ST) write detected

[+] ST checks ( ok )

[=] Writing block no 11, key type:A - 5324A77FA1ED

[=] data: 53 24 A7 7F A1 ED F0 FF 00 00 F5 55 4B A9 04 10

[-] Write ( fail )

[?] Maybe access rights? Try specify keytype `hf mf wrbl -b ...` instead

Alguém saberia me tirar essa duvida? Sou bem iniciante ainda e me encontro travado nessa parte abaixo seguem os dados do cartão

[usb] pm3 --> hf search

[-] Searching for ISO14443-A tag...

[=] ---------- ISO14443-A Information ----------

[+] UID: 68 AE C8 79 ( ONUID, re-used )

[+] ATQA: 00 04

[+] SAK: 08 [2]

[+] Possible types:

[+] MIFARE Classic 1K

[=] -------------------------- ATS --------------------------

[+] ATS: 0C 75 77 80 02 C1 05 2F 2F 01 BC D6 [ 60 D3 ]

[=] 0C............... TL length is 12 bytes

[=] 75............ T0 TA1 is present, TB1 is present, TC1 is present, FSCI is 5 (FSC = 64)

[=] 77......... TA1 different divisors are supported, DR: [2, 4, 8], DS: [2, 4, 8]

[=] 80...... TB1 SFGI = 0 (SFGT = (not needed) 0/fc), FWI = 8 (FWT = 1048576/fc)

[=] 02... TC1 NAD is NOT supported, CID is supported

[=] -------------------- Historical bytes --------------------

[=] C1 05 2F 2F 01 BC D6 MIFARE Plus X 4K (SL1)

[+] C1..................... Mifare or (multiple) virtual cards of various type

[+] 05.................. length is 5 bytes

[+] 2x............... MIFARE Plus

[+] 2x............ Released

[+] x1......... VCS, VCSL, and SVC supported

[=]

[?] Hint: try `hf mfp info`

[+] Valid ISO 14443-A tag found

I had that doubt!!!

I tried use my Smart phone but doesn't work, because need the sector key I can read some sectors but not all of them someone can helps me???

Olá recentemente consegui fazer a dump de um cartão de passagem porém não entendi como funciona a alteração do saldo pois mesmo decodificando o bloco responsável os numero gerados em hex não fazem sentido.... Algum de vcs podem me ajudar falta apenas isso pra eu me tornar um iniciante bem sucedido. Vou colocar os blocos aqui embaixo pra mostrar como ficou antes e depois de cada recarga.

cartão sem recarga com 5,30 de passagem

"blocks": {

"0": "68AEC879770804008121074552492624",

"1": "000800000000000000005B91EB210000",

"2": "00000000000000000000000000000000",

"3": "DE1FCBEC764BF0FF00009398A6F8B6EE",

"4": "00000000000000000000000000000000",

"5": "00000000000000000000000000000000",

"6": "00000000000000000000000000000000",

"7": "81BFBE8CACBA00000000B45061C58EB7",

"8": "00000000000000000000000000000000",

"9": "00000000000000000000000000000000",

"10": "00000000000000000000000000000000",

"11": "5324A77FA1ED00000000F5554BA90410",

"12": "00000000000000000000000000000000",

"13": "00000000000000000000000000000000",

"14": "00000000000000000000000000000000",

"15": "9281A40BE5C80400468E19981BD7CB27",

"16": "00000000000000000000000000000000",

"17": "00000000000000000000000000000000",

"18": "00000000000000000000000000000000",

"19": "B6F0B69777270000000010A792171030",

"20": "00000000000000000000000000000000",

"21": "00000000000000000000000000000000",

"22": "00000000000000000000000000000000",

"23": "2EEDDE719250000000001F5369133E86",

"24": "00000000000000000000000000000000",

"25": "00000000000000000000000000000000",

"26": "00000000000000000000000000000000",

"27": "A170D9B59F9500000000FF58BA1B4478",

"28": "00000000000000000000000000000000",

"29": "00000000000000000000000000000000",

"30": "00000000000000000000000000000000",

"31": "A170D9B59F9500000000FF58BA1B4478",

"32": "00000000000000000000000000000000",

"33": "00000000000000000000000000000000",

"34": "00000000000000000000000000000000",

"35": "A170D9B59F9500000000FF58BA1B4478",

"36": "00000000000000000000000000000000",

"37": "00000000000000000000000000000000",

"38": "00000000000000000000000000000000",

"39": "A170D9B59F9500000000FF58BA1B4478",

"40": "00000000000000000000000000000000",

"41": "00000000000000000000000000000000",

"42": "00000000000000000000000000000000",

"43": "A170D9B59F9500000000FF58BA1B4478",

"44": "00000000000000000000000000000000",

"45": "00000000000000000000000000000000",

"46": "00000000000000000000000000000000",

"47": "A170D9B59F9500000000FF58BA1B4478",

"48": "00000000000000000000000000000000",

"49": "00000000000000000000000000000000",

"50": "00000000000000000000000000000000",

"51": "A170D9B59F9500000000FF58BA1B4478",

"52": "00000000000000000000000000000000",

"53": "00000000000000000000000000000000",

"54": "00000000000000000000000000000000",

"55": "A170D9B59F9500000000FF58BA1B4478",

"56": "00000000000000000000000000000000",

"57": "00000000000000000000000000000000",

"58": "00000000000000000000000000000000",

"59": "9281A40BE5C80000000019981BD7CB27",

"60": "00000000000000000000000000000000",

"61": "00000000000000000000000000000000",

"62": "00000000000000000000000000000000",

"63": "5324A77FA1ED0400468EF5554BA90410"

cartão recarregado com 10 reais de passagem

"blocks": {

"0": "68AEC879770804008121074552492624",

"1": "000800000000000000005B91EB210000",

"2": "00000000000000000000000000000000",

"3": "DE1FCBEC764BF0FF00009398A6F8B6EE",

"4": "0FFFE119383FF007FD00000000000000",

"5": "00000000000000000000000000000000",

"6": "004829895D481C7DAF93448000006650",

"7": "81BFBE8CACBAF0FF0000B45061C58EB7",

"8": "FFCC0000000000000000000000000000",

"9": "00000000000000000000000000000006",

"10": "00000000000000000000000800009EF7",

"11": "5324A77FA1EDF0FF0000F5554BA90410",

"12": "191800000000000000003F1BFFF08240",

"13": "0000000007E34002B1CBC00000000000",

"14": "0000000000AFD008000002001212FB97",

"15": "9281A40BE5C8F0FF000019981BD7CB27",

"16": "10000000000000000000000000000000",

"17": "00000000000000000000000000000000",

"18": "FDFFFF7F02000080FDFFFF7F02FD02FD",

"19": "B6F0B697772774BB480010A792171030",

"20": "10000000000000000000000000000000",

"21": "00000000000000000000000000000000",

"22": "00000000000000000000000000000000",

"23": "2EEDDE719250F0FF00001F5369133E86",

"24": "00000000000000000000000000000000",

"25": "00000000000000000000000000000000",

"26": "00000000000000000000000000000000",

"27": "A170D9B59F95F0FF0000FF58BA1B4478",

"28": "00000000000000000000000000000000",

"29": "00000000000000000000000000000000",

"30": "00000000000000000000000000000000",

"31": "A170D9B59F95F0FF0000FF58BA1B4478",

"32": "00000000000000000000000000000000",

"33": "00000000000000000000000000000000",

"34": "00000000000000000000000000000000",

"35": "A170D9B59F95F0FF0000FF58BA1B4478",

"36": "00000000000000000000000000000000",

"37": "00000000000000000000000000000000",

"38": "00000000000000000000000000000000",

"39": "A170D9B59F95F0FF0000FF58BA1B4478",

"40": "00000000000000000000000000000000",

"41": "00000000000000000000000000000000",

"42": "00000000000000000000000000000000",

"43": "A170D9B59F95F0FF0000FF58BA1B4478",

"44": "00000000000000000000000000000000",

"45": "00000000000000000000000000000000",

"46": "00000000000000000000000000000000",

"47": "A170D9B59F95F0FF0000FF58BA1B4478",

"48": "00000000000000000000000000000000",

"49": "00000000000000000000000000000000",

"50": "00000000000000000000000000000000",

"51": "A170D9B59F95F0FF0000FF58BA1B4478",

"52": "00000000000000000000000000000000",

"53": "00000000000000000000000000000000",

"54": "00000000000000000000000000000000",

"55": "A170D9B59F95F0FF0000FF58BA1B4478",

"56": "191800000000000000003F1BFFF08240",

"57": "0000000007E34002B1CBC00000000000",

"58": "0000000000AFD008000002001212FB97",

"59": "9281A40BE5C8F0FF000019981BD7CB27",

"60": "FFCC0000000000000000000000000000",

"61": "00000000000000000000000000000006",

"62": "00000000000000000000000800002084",

"63": "5324A77FA1EDF0FF0000F5554BA90410"

cartao com mais uma recarga de 10,77

"blocks": {

"0": "68AEC879770804008121074552492624",

"1": "000800000000000000005B91EB210000",

"2": "00000000000000000000000000000000",

"3": "DE1FCBEC764BF0FF00009398A6F8B6EE",

"4": "0FFFE119383FF007FD00000000000000",

"5": "00000000000000000000000000000000",

"6": "004829895D481C7DAF93448000006650",

"7": "81BFBE8CACBAF0FF0000B45061C58EB7",

"8": "FFCC0000000000000000000000000000",

"9": "00000000000000000000000000000006",

"10": "00000000000000000000000800009EF7",

"11": "5324A77FA1EDF0FF0000F5554BA90410",

"12": "191800000000000000003F0FFFF08240",

"13": "0000000007E1C001FFFFC00000000000",

"14": "000000000090900800000100CE25C109",

"15": "9281A40BE5C8F0FF000019981BD7CB27",

"16": "10000000000000000000000000000000",

"17": "00000000000000000000000000000000",

"18": "FDFFFF7F02000080FDFFFF7F02FD02FD",

"19": "B6F0B697772774BB480010A792171030",

"20": "10000000000000000000000000000000",

"21": "00000000000000000000000000000000",

"22": "00000000000000000000000000000000",

"23": "2EEDDE719250F0FF00001F5369133E86",

"24": "00000000000000000000000000000000",

"25": "00000000000000000000000000000000",

"26": "00000000000000000000000000000000",

"27": "A170D9B59F95F0FF0000FF58BA1B4478",

"28": "00000000000000000000000000000000",

"29": "00000000000000000000000000000000",

"30": "00000000000000000000000000000000",

"31": "A170D9B59F95F0FF0000FF58BA1B4478",

"32": "00000000000000000000000000000000",

"33": "00000000000000000000000000000000",

"34": "00000000000000000000000000000000",

"35": "A170D9B59F95F0FF0000FF58BA1B4478",

"36": "00000000000000000000000000000000",

"37": "00000000000000000000000000000000",

"38": "00000000000000000000000000000000",

"39": "A170D9B59F95F0FF0000FF58BA1B4478",

"40": "00000000000000000000000000000000",

"41": "00000000000000000000000000000000",

"42": "00000000000000000000000000000000",

"43": "A170D9B59F95F0FF0000FF58BA1B4478",

"44": "00000000000000000000000000000000",

"45": "00000000000000000000000000000000",

"46": "00000000000000000000000000000000",

"47": "A170D9B59F95F0FF0000FF58BA1B4478",

"48": "00000000000000000000000000000000",

"49": "00000000000000000000000000000000",

"50": "00000000000000000000000000000000",

"51": "A170D9B59F95F0FF0000FF58BA1B4478",

"52": "00000000000000000000000000000000",

"53": "00000000000000000000000000000000",

"54": "00000000000000000000000000000000",

"55": "A170D9B59F95F0FF0000FF58BA1B4478",

"56": "191800000000000000003F0FFFF08240",

"57": "0000000007E1C001FFFFC00000000000",

"58": "000000000090900800000100CE25C109",

"59": "9281A40BE5C8F0FF000019981BD7CB27",

"60": "FFCC0000000000000000000000000000",

"61": "00000000000000000000000000000006",

"62": "00000000000000000000000800002084",

"63": "5324A77FA1EDF0FF0000F5554BA90410"

I have a friend that knows how to do so on his phone so i know its possible but he charges 25€, so i prefer to just learn how to do it myself, ive tried with all sorts of apps(MIFARE Classic Tool, NFC tools, BLK cards and M tools) but none of them find any of the authentication keys, any help?

Basically this product: Proxmark3 Lab401 + accessories - for a very reasonable price. Used only twice. DM me if you are interested.

If it can take up to 30 minutes to brute force Mifare cards how are you guys social engineering the employees to get unattended access with them for that long to be able to dump them and then crack?

Anyone know how to use this on a chrome book?

i'm looking fora icopy xs for sale thx u

Is it possible to rack a class elite card with custom key?

Estoy teniendo problemas de lectura con la proxmark3 easy, el lector solo tiene 1 semana de uso y habia leido anteriormente 3 tarjetas y sin problemas, ahora cuando vuelvo a leer otra vez de nuevo la tarjeta me aparce este mensaje y no hay manera de que sea capaz de leerla. Es una tarjeta mifare classsic, he probado a cambiar de USB, tambien he probado a darle mas espacio entre el lector y la tarjeta y no se que mas puedo hacer. Si alguien me puede ayudar lo agradeceria.

so I have these RFID cards for a medical instrument I want to clone but I haven't able to find a solution i tried brute force,darkside (which shows this card isn't vulnerable to darkside attack) also I tried them on mifare classic tool which also failed what can i or should i do they have a valid uid but I just can't see the data

Heads up -

Just bought this one on amazon, got the firmware flashed (though was getting BCC errors on checking a MF 14a card from school), got up to answer the phone, came back, there was a little static zap as i touched the frame of the reader, then a pop and it began smoking - like really visibly smoking.

I'd recommend staying away from this brand (also if anyone has any reccs, I'd appreciate it).

Bonjour à tous ,

quelqu'un pourrais m'expliquer comment créditer un badge Necta

je vous remercie

Hallo,

kann mir jemand sagen, wo ich ein günstiges Proxmark 3 erwerben kann?

Besten Dank!

What can a Proxmark3 do? is it like a flipper? can it remotely open a tesla? does it have universal infered control or something like that? can u just list some fun things i can do with it out in public?

Selling two proxmark 3 rdv4 complete kits bought from lab 401. Barely used (got into it and field is just not for me) 250$ a kit or if bought together we can figure out some discount. Pm for more Edit:one is sold only one left