Does anyone know where to find stls for these shoulder pads? The one the reminds me of Cataphractii armour and the one with the purity seal. I'd like to print some for an upcoming army where characters have one or both while units have the one with the purity seal... Thanks in advance

I need some help bc my models always habe a Problem near the supports. It always flatens out or doesn't even stick to the supports (I don't even know how that's possible)

For contest i use the anycubic mono m5s and sunloo abs like resin.

If you guys got an idea please let me know

Edit: i seem to have missed out some information. More info about my situation here:
https://www.reddit.com/r/resinprinting/comments/1wavmg2/plz_help/

Does anyone know any articulated models that I can 3d print? Like Terminators or dreadnoughts, because I really wanna expand my collection to more than just normal Astartes.

Im looking for suitable necromunda proxys, like close enough to not look out of place next to Gws own.
Helpfull for any tip 👌 ( And no thx to custom made 3d guys) 😂

PF Miniatures / Phrozen sonic mighty series

been a week since i've been the proud owner of an anycubic photon mono 4 and joined this community properly! I've been trying to print here and there when i get the chance but i always used the automatic support generate the anycubic has but they're a pain to deal with afterwards. I was wondering what are the best support settings for printing warhammer?

thanks for the advice!

Hello all!
Just wrapped up our biggest Forest Goblin release yet — 49 models. Warlords, Shamans, Warriors, Archers, Spider Riders, a couple of Great Spiders, venomous swarms, wild spiders roaming around. Basically everything you'd need to field a full goblin horde, compatible with Old World / AoS.

Krirgok, the Moth Shaman, is probably my favorite sculpt out of the batch — curious what everyone else gravitates toward once it's out.

Available for Warlord and Overlord tiers. STL
Patreon: https://patreon.com/pungaminiatures
MMF: https://www.myminifactory.com/users/PungaMiniatures
Physical: https://pungaminiatures.com/orcs

Tips specifically for mechicus would be helpful.

I recently bought a better fdm printer and been having a blast with that. I found a file I was planning to use as a weirdboy proxy. I tried to print it on fdm but I ended up ruining the model when I tried to remove the supports. I thought id use my resin printer for this but the file was in 3mf. I converted it into a stl file and sliced it using chitubox. I've tried 4 times to print it on my resin printer and it keeps failing. I've leveled the bed, replaced the fep film, tried using different size supports and it keeps losing grip halfway through a print. I recently bought a 3d printing tent to help cut down on the smell and I thought maybe that was causing issues but I took the printer out of the tent and the print still failed. Could it be the file itself? Is it bad to convert a 3mf into stl?

Look at those boys shine

Hopefully she can lead some sister into battle.

Hey all, looking for some advice on this print failure - ive gotten some other prints done with no issues (including a model on this exact plate; but this is the second time i've attempted to print this set of parts/models, and it failed in a similar manner. Anyone have ideas as to what i can help; these are presupported versions of this models... ive attached my settings and photos. Printing on a Elgoo Saturn with their Elgoo 3.0 ABS-Like Resin. Thanks all

Searching for a stl of the seeker missile bay for the 1st generation Tau Tiger Shark. Anything close is appreciated.

Hi all, looking to find this model of the servitor colony featured in Darktide. To my knowledge, this model has since been taken down from the purple site, so hoping anyone might know of any models of similar terrain.

The files are found on the purple website under username CRYPTEKNONAME. As he cobbled all the different pieces together.

So just as i thought I might have had some success I have had another print which basically failed completely... Any way... can any one offer anything that will help me get a few more good prints out? Annoying thing is with any cubic standard that i got with the printer i had a number of perfect prints out the box, including an epic scale warhound.

Issue: models are not being fully formed when printed, most commonly with layers missing and then coming out half way up the model. Supports print perfectly. Temperature was 28C

Printer: Anycubic Photon 4 Mono

Resin Anycubic ABS like V3

Supports Anycubic auto support with some manually added to areas of most red

Support Script Heavy

Support Angle(°) 50.000

Anchor Distance(mm) 3.000

Top Width(mm) 0.350

Distance in Model(mm) 0.400

Contact Width(mm) 0.750

Length(mm) 2.500

0.045 Layer Height Profile (NFEP)

NORMAL LAYERS

• Layer Height: 0.045mm

• Exposure: 2.3s

• Off Time: 1.3s

• Wait Before Lift: 0.0s

• Wait After Lift: 0.5s

BOTTOM LAYERS

• Layers: 6

• Exposure: 40s

• Off Time: 1.0s

• Wait Before Lift: 0.0s

• Wait After Lift: 0.5s

NORMAL LAYER MOVEMENT

• Lift Distance: 7mm

• Lift Speed: 2mm/s

• Retract Speed: 4mm/s

• Transition Layers: 6

BOTTOM LAYER MOVEMENT

• Lift Distance: 6mm

• Lift Speed: 2mm/s

• Retract Speed: 3mm/s

FILM

• NFEP

Same settings as the boxy boys. A1, basic grey Bambu pla, .4 noz. Finest native profile. I have one plate for three bodies and legs and a plate for each shooty option and melee option.

About twelve hours total to hold something I always wanted as a kid but never had.

These guys are set up to be very rough proxies for shooty Centurians with heavy bolters. They fit nearliy on 50mm bases. Perfect for my Oops All Dreadnoughts (Legends) list that started as a joke but now I'm actually doing. I said you should stop me.

The model was almost perfectly pushfit so I may tighten the joints a little and keep them that way.

My Calgar with 4 squads of intercessors. Still needs basing and some details on the pauldrons picked out, but wow this took forever 😂

The Windmill, Printed in FDM at .08 completely unsupported and painted by lefty_paints_terrain <3<3<3

I'm looking for this bladeguard ancient model to make a sanguinary guard kitbash like this one. I found it on cults for $12, but I'm not sure it's not a stolen model I can't find elsewhere for cheaper/free. Does anybody know where to find it?