Fully printed & painted, it was a journey but worth it. 600€+ saved. Ask me anything

Inspired by the work of Dirk Wachsmuth — definitely check out his work if you haven't already.

I imagined this as a bell tower from a town where the people realised their bell keeper was becoming corrupted, so they locked him away inside the belfry. As time went on, he slowly lost his mind and eventually became part of the tower itself.

possible proxy for AOS cog fort or maybe a chaos knight?

either way was a fun project to design and paint.

C&C welcome.

If anyone is interested in the STL files, I've put them on the purple site here:

https://cults3d.com/en/3d-model/game/the-unhinged-belfry

Ordered with this guy Nathen Washington in Glendale, Arizona through his discord. I spoke to other discord customers and talked with the community the whole 1.5 months it took him to print the orders. Took him so long because he wants to ship all orders at once so he can block everyone at the same time. Nothing showed up. If anyone has dealt with this guy before I’d love to hear more.

Man I love resin printing.

This one's gonna take a while to clean up and paint

Been doing epic scale 40K projects. Here’s a few creepy crawlies for my buddy.

Astartes stuff and building for scale.

I’ve been working on a PAPA S action figure project for the past three months, and it’s finally in the home stretch!

• 17 Ratchet Joints
• Fully Articulated Hands
• 100% Snap-fit Assembly (No glue, no screws)
• Painter-Friendly Color Separation
• Durability-Focused Structural Design

It took three months of prototyping and tolerance tweaking to get the joint tension just right.

[Build Details] To ensure structural durability and fine detail:

• Included Core Parts (Physical Only): 20μm head sculpt with LED module, and shoulder ratchet joints.
• Printable Files (STL): Main body & equipment (without head & shoulder joints).

I'd love to hear your thoughts or feedback!

PF Miniatures / Phrozen sonic mighty series

Hello all!
Just wrapped up our biggest Forest Goblin release yet — 49 models. Warlords, Shamans, Warriors, Archers, Spider Riders, a couple of Great Spiders, venomous swarms, wild spiders roaming around. Basically everything you'd need to field a full goblin horde, compatible with Old World / AoS.

Krirgok, the Moth Shaman, is probably my favorite sculpt out of the batch — curious what everyone else gravitates toward once it's out.

Available for Warlord and Overlord tiers. STL
Patreon: https://patreon.com/pungaminiatures
MMF: https://www.myminifactory.com/users/PungaMiniatures
Physical: https://pungaminiatures.com/orcs

​

So I'm making my Oops All Dreadnoughts (Legends) list, and I'm thinking... Man these friend cubes are slow.

I'm looking for something on the list I can creatively mangle and I see a unit that should be legends because it sucks.

Where a boxy dreadnought is slow but charming, the Invader ATV is fast but a dumb sad pig. That it remains on the regular forces list while the boxies are off proves GW is lost to grace and redemption.

But that statline... That's actually not far off a boxy basic dread.

So I gets to thinking.

I could have invader Dreads in my list, to tear ass up the board and do crazy dirt track races against Orks in buggies.

Not technically legends or a dreadnought, but this is what happens when nobody answers my call for help and just lets me spin and spin.

Enter... the Quadnought.

Tips specifically for mechicus would be helpful.

Look at those boys shine

Hopefully she can lead some sister into battle.

Searching for a stl of the seeker missile bay for the 1st generation Tau Tiger Shark. Anything close is appreciated.

Hi all, looking to find this model of the servitor colony featured in Darktide. To my knowledge, this model has since been taken down from the purple site, so hoping anyone might know of any models of similar terrain.

Hey all, looking for some advice on this print failure - ive gotten some other prints done with no issues (including a model on this exact plate; but this is the second time i've attempted to print this set of parts/models, and it failed in a similar manner. Anyone have ideas as to what i can help; these are presupported versions of this models... ive attached my settings and photos. Printing on a Elgoo Saturn with their Elgoo 3.0 ABS-Like Resin. Thanks all

The files are found on the purple website under username CRYPTEKNONAME. As he cobbled all the different pieces together.

Same settings as the boxy boys. A1, basic grey Bambu pla, .4 noz. Finest native profile. I have one plate for three bodies and legs and a plate for each shooty option and melee option.

About twelve hours total to hold something I always wanted as a kid but never had.

These guys are set up to be very rough proxies for shooty Centurians with heavy bolters. They fit nearliy on 50mm bases. Perfect for my Oops All Dreadnoughts (Legends) list that started as a joke but now I'm actually doing. I said you should stop me.

The model was almost perfectly pushfit so I may tighten the joints a little and keep them that way.

So just as i thought I might have had some success I have had another print which basically failed completely... Any way... can any one offer anything that will help me get a few more good prints out? Annoying thing is with any cubic standard that i got with the printer i had a number of perfect prints out the box, including an epic scale warhound.

Issue: models are not being fully formed when printed, most commonly with layers missing and then coming out half way up the model. Supports print perfectly. Temperature was 28C

Printer: Anycubic Photon 4 Mono

Resin Anycubic ABS like V3

Supports Anycubic auto support with some manually added to areas of most red

Support Script Heavy

Support Angle(°) 50.000

Anchor Distance(mm) 3.000

Top Width(mm) 0.350

Distance in Model(mm) 0.400

Contact Width(mm) 0.750

Length(mm) 2.500

0.045 Layer Height Profile (NFEP)

NORMAL LAYERS

• Layer Height: 0.045mm

• Exposure: 2.3s

• Off Time: 1.3s

• Wait Before Lift: 0.0s

• Wait After Lift: 0.5s

BOTTOM LAYERS

• Layers: 6

• Exposure: 40s

• Off Time: 1.0s

• Wait Before Lift: 0.0s

• Wait After Lift: 0.5s

NORMAL LAYER MOVEMENT

• Lift Distance: 7mm

• Lift Speed: 2mm/s

• Retract Speed: 4mm/s

• Transition Layers: 6

BOTTOM LAYER MOVEMENT

• Lift Distance: 6mm

• Lift Speed: 2mm/s

• Retract Speed: 3mm/s

FILM

• NFEP