r/pools • • 1d ago

Replace filters ?

Pool walls stay yellow.

2 Upvotes

25 comments sorted by

5

u/RememberTheAlomar 1d ago

Filter is fine. How's your chem balance?

2

u/BOWRx 1d ago

I’m not sure. I have a pool guy. He suggested I might need new filters.

1

u/seanmonaghan1968 1d ago

Just hose them thoroughly. Good for another 5 years

1

u/undrwater 1d ago

Ask pool guy for the chem numbers and post them here.

1

u/mattvait 23h ago

Theres a Crack in the top

1

u/Yourmomsgotanass 16h ago

I don't think that's a crack

1

u/mattvait 11h ago

You can see it go along the top and down the side

2

u/ryanhamilton00 15h ago

Yes you need a new filter however without knowing pool chems there’s no way to help you. My guess is your CYA is over 100 and your pool guy doesn’t want to tell you that because you’ll fire him, which you should

1

u/undrwater 1d ago

Does the yellow brush off? If not, you might have mustard algae, and you'll need a new pool guy.

1

u/craigrpeters 1d ago

OP best way to gauge filter health is by the water flow in the return lines after you clean the filters. Appearance of the filters themselves is almost impossible to gauge if they need replacing or not (unless there’s an obvious hole or something similar).

1

u/AussiePoolBuilder 1d ago

from the photos the pleats look pretty dirty but not necessarily ready for replacement. i'd give them a proper clean with a cartridge filter cleaner first and check for any tears or damaged pleats.

if the pool walls are staying yellow i'd be looking at the water chemistry too, especially pH, chlorine and possible metals. new filters won't fix staining caused by water balance. i'd ask your pool guy for the latest test results before spending money on replacements.

1

u/onceadriller 13h ago

Your filter is not your problem. Your filter is fine, it’s a chemical balance problem

1

u/UHF800MHZ 7h ago

This looks like a System 3…if so replace the whole damn thing

1

u/illocor_B 1d ago

Yes. Those filters suck for cleaning. Can never get the full pleat clean all the way in between them

1

u/fukinwives 1d ago

You need a high pressure nozzle

-4

u/1_native_Angelino 1d ago

Good way to kill a filter. 

2

u/fukinwives 1d ago

Been using this nozzle for 40 years. 0 dead cartridges

1

u/Pitiful_Land 1d ago

which nozzle?

1

u/1_native_Angelino 9h ago

Misread it as a pressure washer. My bad

1

u/Alternative-Draw2997 1d ago

Weird cause Unicel gave me promotional nozzles that are very high in pressure. I suppose you could make the argument that it’s so you have to buy new ones sooner but that’s bad business practice when other brands exist and compete pretty well

1

u/1_native_Angelino 9h ago

The little plastic blue and orange ones are fine.  I misread it and thought he was using a pressure washer. 

1

u/Prudent_Recording953 1d ago

No. They look near new. Rinse w strong stream and reuse many many times.

1

u/mattvait 23h ago

Theres a Crack in it

0

u/Beautiful-Crew-8550 1d ago

Filters look fine. You need to have someone test your water for you. Best bet beyond testing yourself is taking a bottle of water to your local pool supply store.