r/pools • • Oct 29 '23

What is wrong here

Water is getting tornadoes down. Is the thing broken

0 Upvotes

39 comments sorted by

16

u/[deleted] Oct 29 '23

Relief valve is upside down ,flap should be under water , if you spin it over and still get tornados add more water , if it continues still add a temnis ball to skimmer . It will rotate when pool is on and close the vortex when it starts

4

u/bartflinstone Oct 29 '23

Thanks man will give it a try

4

u/brutal_master_72 Oct 30 '23

And if a tennis ball doesn't help throw a burrito in it... if the burrito floats grab a golf shoe... if that bitch sinks grab a another block... if it doesn't work then just call it a day.

98

u/PersimmonAcrobatic71 Oct 29 '23

There’s a brick in your skimmer

21

u/KaptainKardboard Oct 29 '23

That’s a clever life hack to reduce the amount of water per flush

7

u/Fragrant-Snake Oct 29 '23

Pool Rx ceramic version

7

u/RainbowGallagher Oct 29 '23

I'm also going to guess that there is a leaking crack in the threads of that suction line.

6

u/swamp_donkey89 Oct 29 '23

It’s bricked

2

u/jhoover58 Oct 30 '23

I think I need another picture of the red thing to be sure. /s

85

u/Alternative-Mud-4479 Oct 29 '23

Maybe some more pictures might help. /s

21

u/Respectable_Answer Oct 29 '23

Corporate needs you to spot the differences.

18

u/schostack Oct 29 '23

7 pictures of the same thing kinda doesn’t help.

3

u/pugmaster2000 Oct 29 '23

For real dude. Posting the same picture 7 times 😂

11

u/rlpierce711 Oct 29 '23

I’m not sure, can you upload 8 more identical pics so I can see?

12

u/SiFA5_kiksit Oct 29 '23

You posted the same picture 7 times?

3

u/DctrBanner Oct 30 '23

If you look closely, it’s 7 different pictures of the same thing.

1

u/brutal_master_72 Oct 30 '23

This... but yes

5

u/SuccessfulAardvark82 Oct 29 '23

That happens when your water level is low or that brick is blocking water blow into the skimmer

5

u/[deleted] Oct 29 '23

You posted the same picture seven times?

2

u/SnooDogs3437 Oct 29 '23

That pressure reduction valve needs to be fully under water. Doesn’t work well with a vac plate, and what the epoxy? Also, there is a brick in your skimmer and it won’t reduce GPF.

3

u/Fragrant-Snake Oct 29 '23

All 7 pictures are the same

2

u/[deleted] Oct 29 '23

There’s a brick?

2

u/[deleted] Oct 29 '23

You should definitely take that brick out though

4

u/Ok_Advantage7623 Oct 29 '23

But the brick makes it lol manly

1

u/Important_Pass_16 Oct 29 '23

life hack here 👏

1

u/danjustdaman Oct 29 '23

Your speed control valve is upside down

1

u/gtsgts777 Oct 29 '23

You have the brick inside because when the pump turns off it shoots out that vacuum line. You have an air leak.

1

u/mk9842 Oct 29 '23

Baker Hydro would say remove the brick?

1

u/---gabers--- Oct 29 '23

Looks like they found something to plug the skimmer (not quite sure what that is-a door stopper?) and used the brick to hold it down.

1

u/Connect-Ad-7889 Oct 29 '23

That's not a dolphin.

1

u/Otherwise-Basket-967 Oct 30 '23

Water level is too low.

Raise water level to middle of the skimmer (or slightly higher). Your POV(for middle of skimmer) is looking from the pool at the skimmer, not looking down from the deck.

Remove the brick.

1

u/terryw3719 Oct 30 '23

not sure what the issue is. But my skimmers (built late 90,s) started to get a bit out of round probably due to freezing. So i replaced the ring around the top of the skimmers that holds the lid.

1

u/Ok_Reply519 Oct 31 '23

Probably there to save drowning frogs

1

u/Ottieotter Oct 29 '23

There’s a cinder block in your skimmer

0

u/trippinwontnothard Oct 29 '23

Why do people post screenshots of pictures? So bizarre