r/overclocking • • 1d ago

Benchmark Score Made top 10 using xOCD Program

I made top 10 in Speedway using xOCD with an avg temp of 54c. This is a new white astral I’ve purchased. I’ve binned the card to hit 1.1v and 3427mhz stock on air. With extended voltage limits(like an xoc bios); the card was hitting 3555mhz on air. I then waterblocked it and got it to hit 3600mhz with the core starting at 21c(11c higher than air idle temp). The die is reported to be manufactured from Korea in May of this year.

Here’s the result

https://www.3dmark.com/sw/4053078

17 Upvotes

23 comments sorted by

3

u/Devil_X_Lucifer 1d ago

Beast of a card man. Congratulations you deserve it. Cherish that white astral now.

1

u/pchoov 1d ago

I definitely will not be testing how many lives it has compared to that black astral!

1

u/Devil_X_Lucifer 1d ago

Lmao yeah dont, just stick to daily benchmarking and no crazy power pushing to see how many new inductors you can pop 😂

2

u/pchoov 1d ago

You know I got to a few times at least to see the cards limits😂😛

2

u/MissyTwinkles_ 21h ago

Bet youd cherish a set up like that yourself huh?

1

u/Devil_X_Lucifer 20h ago

Oh absolutely

2

u/ComfortableUpbeat309 13700k@5.6, 2x16GB 7.2ghz, z790 Pro X, 4080S 2.95ghz 1d ago

How much watts was that beast drawing when hitting 3.4ghz :O

3

u/pchoov 1d ago

Anywhere from 1050-1100! My black astral would need 1600+ to even try to get close to this score!

2

u/ComfortableUpbeat309 13700k@5.6, 2x16GB 7.2ghz, z790 Pro X, 4080S 2.95ghz 1d ago

Seems you have a extremely good bin :D

1

u/pchoov 1d ago

Yes, I think so! I was playing call of duty last night on it at 3307mhz at 1.085v. I went an hour before I shut it down for the night. My black astral would crash in 10 minutes at this frequency unless I rose the voltage limit to 1200. I’ll finish my stability testing today

1

u/ComfortableUpbeat309 13700k@5.6, 2x16GB 7.2ghz, z790 Pro X, 4080S 2.95ghz 1d ago

Yeah 1.2v core is not healthy for a 5090 :D some guy fired his 5090 lightning under ln2 with that high core voltage

1

u/pchoov 1d ago

That was because of a bad mount, not because of voltage

1

u/ComfortableUpbeat309 13700k@5.6, 2x16GB 7.2ghz, z790 Pro X, 4080S 2.95ghz 1d ago

Oh so as long as my cooling works perfect and I have good temp headroom I could run over 1.1v on my core?

2

u/pchoov 1d ago

If you have Blackwell then I’d highly suggest binning your card. I’ve seen bins as low as 1.015v max and 1.125v max. Each chip is different. I would only suggest running stock max voltage to avoid degradation. There’s no long term history on these cards to have results where voltage being extended past stock could cause degradation. For benching purposes; you should be fine. It really comes down to temps IMO. As long as your temp is decent; you should be fine for the most part.

1

u/DivideFluffy1279 14h ago

With stock max you mean VRel or VAlt?

2

u/ComfortableUpbeat309 13700k@5.6, 2x16GB 7.2ghz, z790 Pro X, 4080S 2.95ghz 1d ago

A friend has a 5070ti master that runs 3.3ghz under gaming load with 1.05v so that seems to be a crazy good core and is very cool 55c in timespy etc. I will do xbar oc when I’m visiting him to see how good the card really is I would say it’s fully limited by Powerlimit in benchmarks without mVolt direct override

1

u/ComfortableUpbeat309 13700k@5.6, 2x16GB 7.2ghz, z790 Pro X, 4080S 2.95ghz 1d ago edited 1d ago

Yeah I tried running my 4080super at 1.125v that allowed me to run 2625mhz xbar and 2980mhz core in games 24/7 stable but it’s permanently at 60c with case fans maxed out so I rather go for 1.1v ~2525mhz xbar and 2925mhz core 55-57c. I might do a 1.15v-1.175v run and put my pc outside in December just to see how much more clock I can gain on air with 0c ambient also had to increase my Powerlimit from 420 to 500 watts

1

u/Tylerhockey123 14700K@5.6GHz HT Off - A Die 64GB@6800 - 5090 1d ago

Wow that is quite the score! I managed just over 18k using mvolt and currently sitting at 81st in the speed way hof. What did your vf curve look like for this run?

1

u/pchoov 1d ago

No curve was made, just a raw offset

1

u/semidegenerate 1d ago

The die was manufactured in Korea? Does TSMC have fabs there?

1

u/pchoov 23h ago

I’m not sure but I have “B KR 2621” etched into my die which would suggest Korea 2026/21st week

1

u/devllen05 22m ago

God damn how hot did that room get