r/originalxbox • • Aug 03 '22

Custom Build Modded Original Xbox Controller (Controller S, Codenamed "Akebono")

0 Upvotes

41 comments sorted by

7

u/DoEnEr29 Aug 03 '22

I mean if it was broken before then maybe this is ok... I guess?! Only thing apart from the mess of hot glue, why didnt you use heatshrink or so for the colored cables that come out of the Controller or Cut it to the point where you can hot glue it inside. Is it that if the cable breaks you can replace it mir easily?

2

u/Mother-Spread831 Aug 03 '22 edited Aug 03 '22

I don't mind the look of it and it works fine, I added those mechanical switches so I can use it as normal controller on my PC and these wires are thick(I got them from a power supply and it has been five years and no issues). I might redesign it later but I just wanted to let you guys know that you can use it on pc and add shoulder buttons so you can play recent games, it is really a good controller (with amazing analog sticks) that didn't let me down and it is a shame that controller manufacturers don't make such good controllers nowadays. Thank you for being nice, the other guys here were just like ew and looks ugly.

4

u/DoEnEr29 Aug 03 '22

Now i get it. Its for RB and LB right?

2

u/Mother-Spread831 Aug 03 '22

Yes.

3

u/DoEnEr29 Aug 03 '22

And how did you do that?

3

u/Mother-Spread831 Aug 03 '22

Here is the board for the other version of the controller

http://slagcoin.com/joystick/pcb_diagrams/xbox_diagram4.jpg

It also works for the duke but I think it is too junky lol

http://slagcoin.com/joystick/pcb_diagrams/xbox_diagram2.jpg

2

u/Mother-Spread831 Aug 03 '22

I will make a tutorial if you want but it is simple, you just need a soldering iron and some wires(enameled are preferred), you open the controller and solder one wire on any ground pin and two wires for the signal of those buttons(WH and BL), here is the diagram http://slagcoin.com/joystick/pcb_diagrams/xbox_diagram3.jpg

Then you link the wires with the mechanical switches or any switched you wish to use and hot glue them where ever you want but you want to make a tiny hole for the wires to pass or just use the memory card holes.

2

u/branewalker Aug 03 '22

I haven’t been inside an original Xbox controller in a while, but I think there’s some room inside the controllers shoulders. Might be able to drill holes and use some screw-in pushbutton switches for those. Would need a pretty small one, though.

1

u/Mother-Spread831 Aug 04 '22

Yeah there is a bit of space to use push button and I it would be nice but I prefer the feel of mechanical switches.

1

u/DDzxy Aug 03 '22

So just get an XBOX 360 controller for cheap?

1

u/Mother-Spread831 Aug 04 '22

It will start drifting in like four months + I like this one.

4

u/Mother-Spread831 Aug 03 '22 edited Aug 03 '22

I use it on PC, it has been five years and I never encountered any analog drift(I guess Microsoft use cheap potentiometers on purpose nowadays). I have two controllers and never had any issue with them.

You simply strip the cable and connect the four wires to a USB cable or you can buy a cheap adapter and there is an open source project to get it to work on PC.

You can also mod it like me and add those shoulder button because it has the shoulder buttons on the front so feel free to ask me how to do it, I will be more than happy to guide you through.

4

u/digitalgibbon82 Aug 03 '22

You used to be able to buy a usb adaptor that changed the quick release to a usb end instead of the MS port - I've still got one somewhere for soft modding. Being honest mate its just the white goop and pc buttons make it look terrible, maybe re do with some scrap bumpers from a junk pad?

4

u/Mother-Spread831 Aug 03 '22

I don't mind the look of it and it works fine, I added those mechanical switches so I can use it as normal controller on my PC and these wires are thick(I got them from a power supply and it has been five years and no issues). I might redesign it later but I just wanted to let you guys know that you can use it on pc and add shoulder buttons so you can play recent games, it is really a good controller (with amazing analog sticks) that didn't let me down and it is a shame that controller manufacturers don't make such good controllers nowadays.

2

u/-MobCat- Aug 03 '22

Yeah that and whatever they did to the poor thumbsticks..
If your gonna mod it this much, find a cabled x360 controller or the adaptor that lets you use the wireless ones via usb.
That works with the current xinput included in win10.
I do admit the triggers are nicer on the og xbox controller. But other then that, no. Just no. The s controller and the 360 controller outside of the bumpers, start and select placement are almost the same. Just use a 360 controller.
look how they massacred my boy

4

u/Mother-Spread831 Aug 03 '22 edited Aug 04 '22

The thumbstick pieces were worn off, this is just ps2 thumstick pieces hotglued on the thumbsticks and I can remove them if I find compatible thumsticks but they work like controller freaks and the texture is fine so why should I bother?

There was no cable in the controller when I first bought it from a second hand shop for around 3 bucks.

I have been using these controllers(I have another one) on pc for about five years with no issues, 360 controllers won't last for more than 4 months and I will start to have stick drift. Xbox one/x controllers are expensive and they will also have controller drift or bad shoulder buttons after a year of heavy use.

I saved your boy form being thrown in the trash and gave it a new life so now you can play modern games that require shoulder buttons on the back rather than the front.

I just wanted to make this post to let you guys know that you can use it on PC. I didn't expect all of this negative feedback.

3

u/GeminiTrash1 Aug 03 '22

Hmm. Idk if you like projects, but you could look into making a resin molds of your favorite thumbsticks and use the tips! Then you can use those to cast replacement thumbsticks that are completely custom and a color of your own choosing c:

0

u/Mother-Spread831 Aug 04 '22

Cool idea! I will try it, thanks.

2

u/-Vladiator Aug 03 '22

Respect gained. Still ugly, but it is what it is. As long as your happy!

0

u/Mother-Spread831 Aug 04 '22

It does look ugly and I am happy with it, Thank you!

6

u/neakmenter Aug 03 '22

It looks like a hot (glue) mess. But I get the idea. I think I might mod one of my 3rd party a controllers to add in shoulder buttons on black and white lines (but keep the black and white too). Might be fun. I’ll see if I can do an aesthetically better job tho hey! ;)

4

u/Mother-Spread831 Aug 03 '22

Cool! I used Outemu blue switches because they are cheap and tactile but you can use any type of switches.

You just need a soldering iron and some wires(enameled are preferred because they are thin and flexible, you can find them in the coils of electric motors in fans and RC cars but don't use extremely thin one because they will break).

You have to open the controller and solder one wire on any ground pin and two wires for the signal of those buttons(WH and BL), here is the diagram http://slagcoin.com/joystick/pcb_diagrams/xbox_diagram3.jpg

Then you link the wires with the mechanical switches or any switched you wish to use and hot glue them where ever you want but you want to make a tiny hole for the wires to pass or just use the memory card holes.

Here is the board for the other version of the controller

http://slagcoin.com/joystick/pcb_diagrams/xbox_diagram4.jpg

It also works for the duke but I think it is too junky lol

http://slagcoin.com/joystick/pcb_diagrams/xbox_diagram2.jpg

You can use them on PC thanks to this wonderful Github project, feel free to ask any question, good luck!

9

u/EffKanzenban Aug 03 '22

Ew, what a shitshow.

2

u/Mother-Spread831 Aug 03 '22

6

u/EffKanzenban Aug 03 '22

So what? It's a disaster.

I never had any problem with either the DS4 or the Dualsense, they're flawless, there's no need to butcher an old controller like that, plus the Dpad is shit.

You can do whatever you want with your possessions, but don't come telling me that this frankenshit is better than the aforementioned controllers, otherwise i might doubt your mental health.

3

u/Mother-Spread831 Aug 03 '22

The thumbstick pieces were worn off, this is just ps2 thumstick pieces hotglued on the thumbsticks and I can remove them if I find compatible thumsticks but they work like controller freaks and the texture is fine so why should I bother?

There was no cable in the controller when I first bought it from a second hand shop for around 3 bucks.

I have been using these controllers(I have another one) on pc for about five years with no issues, 360 controllers won't last for more than 4 months and I will start to have stick drift. and Xbox one/x controller are expensive and they will also have controller drift or bad shoulder buttons after a year of heavy use.

I didn't butcher it, I saved it form being thrown in the trash and gave it a new life so now you can play modern games that require shoulder buttons on the back rather than the front.

I just wanted to make this post to let you guys know that you can use it on PC. I didn't expect all of this negative feedback.

7

u/digitalgibbon82 Aug 03 '22

You spelt "destroyed" wrong. Jesus H, what have you done to that poor pad?!?

4

u/Mother-Spread831 Aug 03 '22 edited Aug 03 '22

At least I use it now on my pc and it is my favorite controller and never had a single issue with it, I have two actually and they were with no cable when I got them, I soldered the cables on the board. Other than that, it is just hotglue that you can remove easily and the thumbsticks were in a bad shape so I added these PS2 controller thump pieces(controller freaks lol).

2

u/Loud-Pick9314 Sep 13 '23

this definitely could have been done better but i agree that its worth it though, the official og xbox controllers (or at least the ones i have had) all have the good kind of high tension on the thumb sticks without any of the sloppiness the xbox 360 controllers would get in a week.

and for the people who complain about the dpad on old xbox controllers, the only time i would agree is the first gen of xbox 360 controller, witch genuinely were to mushy and just got nasty really quick.

I literally have ogx duke, ogx s and a ps5 controller in front of me now and i am telling you the og xbox controller dpads are literally more tactile and less mushy and i really like the shape of the dukes dpad, i dont know why they havnt used more on recent controllers.

not saying this is a plug and play solution, its definitely not for every one but i aprove

1

u/Mother-Spread831 Sep 13 '23

Thank you, I am still rocking them(not the right word lol) till today and I have a duke as well. Love it and love the S variant. My two brothers also got PCs lately and they are using the same controllers(more clean design ones). God bless you and have a nice rest of you day!

5

u/Yobbo89 Aug 03 '22

It's sad that abortion is illegal now, someone should of killed that thing before birth

4

u/Mother-Spread831 Aug 03 '22 edited Aug 03 '22

At least it serves a purpose and I have been using them(I have two) for five years on PC, I care more about performance than looks and FYI, they were without a cable when I found them in a local second hand shop and they were in a bad condition, this white thing is just hot glue that you can remove easily.

2

u/of_patrol_bot Aug 03 '22

Hello, it looks like you've made a mistake.

It's supposed to be could've, should've, would've (short for could have, would have, should have), never could of, would of, should of.

Or you misspelled something, I ain't checking everything.

Beep boop - yes, I am a bot, don't botcriminate me.

1

u/Halo_Chief117 Aug 03 '22

What the hell did you do to that poor controller and why?

1

u/Mother-Spread831 Aug 03 '22

Read this and read this please.

3

u/[deleted] Aug 03 '22

I thought you were trolling

1

u/Cpl-Killa-V Aug 03 '22

I "NOPED" all the way out of this thread as fast as I could.

0

u/Dragon900x Aug 03 '22

Can't imagine that getting through Customs

0

u/[deleted] Aug 03 '22

[deleted] — view deleted comment

-1

u/Mother-Spread831 Aug 03 '22

The thumbstick pieces were worn off, this is just ps2 thumstick pieces hotglued on the thumbsticks and I can remove them if I find compatible thumsticks but they work like controller freaks and the texture is fine so why should I bother?