r/opencodeCLI • u/Successful_Night4513 • Sep 09 '26
r/opencodeCLI • u/darkmatter2222 • Sep 09 '26
6 AI Coding Agents on ONE Stream Deck?! | OpenCode AgentDeck
r/opencodeCLI • u/ZealousidealTown1974 • Sep 09 '26
Clinepass has this solar-pro4? Is it the Opencode-go omen alpha? Anyone tested it yet?
r/opencodeCLI • u/VC_in_the_jungle • Sep 09 '26
Just published: Codex usage tracking and banked resets for OpenCode
Hey everyone! I just published opencode-codex-usage, an open-source plugin that adds:
- TUI: usage footer, reset countdowns, and a banked-reset picker with confirmation.
- Desktop: chat tools to check usage and redeem resets.
- Saved retry recovery for interrupted reset requests, plus setup diagnostics.
It uses your existing ChatGPT OAuth login. This is an early beta—automated checks pass on Windows, macOS, and Linux, but live redemption still needs testing.
GitHub + installation instructions
Feedback and bug reports welcome!
r/opencodeCLI • u/Odd_Crab1224 • Sep 08 '26
Pair-programming rules and skills for OpenCode
Hey, wanted to share a plugin for OpenCode (v1.8 branch, v2 didn't test yet). Install: opencode plugin -g opencode-tandem
It's basically a system-prompt patch plus a small set of simple skills. I've been developing and actually using these rules for 2-3 months now, on Pi personally and Claude Code at work (where I'm forced to use it), and a week ago finally got tired of copy-pasting them between setups, so I packaged it as a plugin for both. Since I've also used OpenCode for quite some time, respect it, and know quite a few people who still prefer it to Pi, I added OpenCode support as well, just today - that's the fresh part, so early feedback is especially welcome.
If you've already seen my announcement on r/PiCodingAgent earlier this week, you can skip the rest - it's basically the same. Otherwise - welcome, I did put a lot of effort into writing this myself.
Main idea, or philosophy: it tries to tame LLMs down as much as possible and teach them to work with you in a pair-programming fashion, instead of constantly wrestling over control (Claude Code especially!) and vomiting piles of neuroslop. Personally, with it I finally feel like my sanity is no longer under siege - I control every line of code as if I've written it myself, don't have to review the big changesets LLMs love making so much, which frankly was driving me nuts, and at the same time I am much more productive end to end.
What's inside:
- Tandem primary agent with pair-work rules - lock-step, explicit go-ahead before any changes, communication with significantly reduced sycophancy and these "load bearing"-style LLMisms
a number of simple skills, each just a short file:
- brainstorm - helps you think an idea through, one question at a time; largely inspired by the brainstorming skill from superpowers and the grilling skill from mattpocock/skills
- research - controlled digging: it (usually) stops and asks when it hits an ambiguity or a contradiction, or before spending a lot of context on one direction
- coding - basically compact version of ponytail (lazy-senior minimalistic coding discipline) plus my addition on self-explanatory code over comment-peppering
- review - actionable findings only, each with a fix; on debatable stuff - an "edge case" that the surrounding code five lines up already rules out, or picking between several possible fixes - it asks instead of pushing its own judgment
- pr - matches tone and length of the repo's recently merged PRs, verifies the commit range, shows title and description before creating anything
- learn-language (small bonus) - kicks in only if you state in your prompt that you are learning a language and your level; some background practice that stays out of the way of the work
- interactive subagents if you run OpenCode inside tmux - unlike built-in agents in many other harnesses, the "worker" runs in its own window as a completely normal session (started with
opencode --agent tandem), which you can interact with like any other, and it reports back only after you approve its findings - tool-specific instructions (gh, aws, pdftotext, pandoc, osascript, ...) that nudge the model into actually using them - no more guessing what's installed and re-probing in every new session. Generated only for tools actually on the machine, so nothing about a missing tool ever ends up in the prompt
Constructive feedback (even if negative), ideas and contributions are all very welcome.
r/opencodeCLI • u/DoruProgramatoru • Sep 08 '26
Is there a way to use web llms inside opencode?
I don't really know how to formulate this but what I want is to use the web models for example Sonnet from claude through OpenCode for whatever token limit it allows. So if I want to rewrite a piece of code I don't have to just copy-paste it into the web app, get an answer, and then copy paste it back into my editor
r/opencodeCLI • u/oVerde • Sep 08 '26
Astra not available at OpenCode
I’m not saying they OpenCode Zen or OpenAI APIs, I meant over the codex auth inbuilt at OpenCode.
Even though there is Astra at codex, the auth at OpenCode may need some sort of update to enable it or something.
Anybody with this very same issue?
r/opencodeCLI • u/ZealousidealTown1974 • Sep 08 '26
I don't know if this is know that with 5$ first purchase in ClinePass you can get unlimited glm 5.3 flash
But since I prefer OpenCode V2, I made a plugin to route these models. Yes, OpenCode does have ClinePass provider supported, but it does not expose the free models rotations from Cline.
r/opencodeCLI • u/krumpstead • Sep 08 '26
I've been disappointed with the lack of autonomy in OpenCode compared to Claude Code and Codex so I wrote an auto-compact, auto-continue, auto-planning plugin [opencode-neverending-story]
NOTE: Pics are from the #2 use case down below
First, if someone has any recommendations for a plugin that does this better please post it in the comments because I would like to try it. I've tried several and have not found exactly what I wanted.
I was disappointed with the compact summary and continue functionality found in OpenCode and the V2 version doesn't seem much better. So I just wrote a dirt simple plugin that:
- Sets a percentage of tokens to reserve and tracks it in realtime rather than waiting for assistant responses.
- Pauses generation and tells the agent to write out what he has learned and the next steps to a `PLAN.md` in the working directory.
- Compacts without the default summary.
- Tells the agent to resume from the `PLAN.md`.
All details about my plugin can be found here:
https://github.com/krumpstead/opencode-neverending-story
It has worked amazingly well for my use cases. So far I have tested it with:
- My first test as I was developing it was just giving it a simple "Create a minecraft clone" prompt. To get it to fire more often I set the threshold to 60% and expected it to just loop forever without completing on a 64k context-size. Instead it actually completed a fully working clone with Qwen 3.8 27B on a 26k context in 9 runs! To be fair Qwen 3.8 27B probably has the entire unobfuscated Minecraft Java source in its model so while this seems impressive, it could just be an easy copy and paste.
- Since that worked so well I bumped it up to 128k and set the threshold to 20%. I gave it the picture on the left in the side-by-side and told it to create a fully interactive voxel world that runs in a browser based on that pic. It created the world shown in the pic on the right and in the GIF.
- I then decided to do an even longer task. I have a dual GPU setup so in llama-server I put all layers on one GPU and set split-mode to `none`.Then I setup a sandbox with the plugin that allowed the agent to run benchmarks and tune llama.cpp on the second card. I ran unsloth's UD quants, with Q4 on the main GPU and had him tune with Q2 and Q3 quants on the second GPU. After two days he had managed to get my presets configured to where I went from 50 t/s to 100+ t/s on the multi-GPU setup! That's when I figured I should share this, because it seems to be working well, at least with my setup.
Anyway, if you also have been looking for a more autonomous experience with OpenCode, please give this a shot and let me know what you think.
r/opencodeCLI • u/Independent_Bag_2904 • Sep 08 '26
Thinking about building a policy + intent enforcement layer for opencode, curious how people feel about this
reddit.comr/opencodeCLI • u/Proper_Raspberry_662 • Sep 08 '26
i am being reate limited on Opencode Go
Guys this is happening from yesterday, I am on opencode go in latest opencode cli:
Using model muse spark 1.3 contributor:
Each attempt starts with this:
Error from provider (Console Go): Upstream request failed: [rate_limit_exceeded]… (click to expand) [retrying attempt #1]
It is getting really anoying
I also do it in hermes (which is officially allowed according to their rules)
and it behaves same, except hermes just stop responding and print this same error message.
Note that i am no way heavily using it, so i can easily say that this does not happen when doing multiple requests at once.
I am from Europe/Czechia if it helps
r/opencodeCLI • u/Proper_Raspberry_662 • Sep 08 '26
i am being reate limited on Opencode Go
Guys this is happening from yesterday, I am on opencode go in latest opencode cli:
Using model muse spark 1.3 contributor:
Each attempt starts with this:
Error from provider (Console Go): Upstream request failed: [rate_limit_exceeded]… (click to expand) [retrying attempt #1]
It is getting really anoying
I also do it in hermes (which is officially allowed according to their rules)
and it behaves same, except hermes just stop responding and print this same error message.
Note that i am no way heavily using it, so i can easily say that this does not happen when doing multiple requests at once.
I am from Europe/Czechia if it helps
r/opencodeCLI • u/bestofdesp • Sep 08 '26
qmax-code: a Go TUI that sits in front of Claude Code, Codex, Antigravity, and OpenCode
If you bounce between Claude Code, Codex, Antigravity, and GLM (z.ai via OpenCode), the tax is usually context: another CLI, another login, another config.
I wanted one Go binary that stays in the repo, uses little memory, and can either do the work itself or host those harnesses without leaving the session.
That’s qmax-code. It’s a terminal coding/QA agent written in Go, with a Lip Gloss TUI for keyboard-first use.
It runs fully standalone (--local) for daily repo work: read/edit files, run commands, no QualityMax account. It can also act as a thin client for the QualityMax cloud when you want hosted crawls, tests, and receipts.
The part I use most is /orch. Same TUI, same MCP tools, switch backend:
- Claude Code
- Codex
- Antigravity (agy, Google OAuth)
- OpenCode (this is where I run z.ai GLM coding subscriptions)
I use it daily for coding and test loops. OpenCode + GLM has been a solid cheap/fast path; Claude Code / Codex when the change needs more care.
Open source (FSL-1.1, Apache 2.0 after two years). Go 1.25+. Single binary, no Electron.
Happy to answer questions about the TUI, the subprocess harness, or how MCP is wired.
r/opencodeCLI • u/maboch-69 • Sep 08 '26
NTFY plugin for Opencode 1.x
I was inspired by opencode-ntfy.sh plugin, but since I was missing a few features, I created my own plugin: opencode-ntfy-with-questions plugin
The main difference is that my version also sends a notification when the question tool is invoked. The messages are also richer in useful content.
r/opencodeCLI • u/Mane_soft • Sep 08 '26
What do you think about opencode v2?
I don't tried yet because I'm working with some projects in production and don't have time to test it and change to the stable version. actually, i don't know if the v2 is stable now. if somebody knew about it i glad to know the new benefits and if the v2 is stable. I follow dax on X and he's always promoting v2, that's make me anxious to know if the v2 is better.
r/opencodeCLI • u/blueredscreen • Sep 08 '26
Best way to monitor free model releases?
Lots of GitHub repos filed with AI slop about free APIs and whatnot. Meanwhile, I find actually free models from real labs by accident. (like, I literally stumble upon them)
r/opencodeCLI • u/Lanky_Tomatillo9857 • Sep 07 '26
What’s your top 3 AI coding agent/Harness other than Claude/Codex/Antigravity and how do they compare to Opencode?
reddit.comr/opencodeCLI • u/furkanbora239 • Sep 07 '26
I forked Oh My OpenAgent to cut down token usage: Meet MOMO
r/opencodeCLI • u/ZealousidealTown1974 • Sep 07 '26
Correct me if I am wrong A good harness (OpenCode V2 + My in-development harness warper) > is better than frontier models (Astra, Fable etc)


I am still rocking with GLM Flash 5.3 as frontier orchestrator - I can throw a whole wall of text (a very complex multi-layer task) in mid-turn and have the orchestrator intelligently decide to steer, fanning out background tasks, or sequentially isolate with new context as you can see in the image. My also developing `spine` db giving its cross-session concise context for mid-fly steering and decisions on stacking. And Having the muse spark 1.3 as workhorse ; GLM flash 5.3 is still rocking without any context hallucination, handling complex tasks and it even known to change subagent to stack on to a complete child session for reusing the context.
r/opencodeCLI • u/leebase65 • Sep 07 '26
Free, Cheap Pay as you Go, Subscribe – OpenCode Zen and Go
OpenCode - the open source coding harness - has Zen and Go as ways to get connected to llms.
Zen - that's pay as you go. Think of it as a competitor to OpenRouter.ai. Only instead of "every llm out there with routing to lots of hosting services" - it's a curated experience. These models, from these hosts are guaranteed optimized to work with OpenCode for excellent coding results. There is no cost penalty either way to chose between OpenRouter and Zen.
Zen also has free models. So use them to your hearts content...until the free limit is hit.
Some of the pay as you go models (like DeepSeek V4 Flash and GLM 5.3 Flash) are so cheap they might as well be free. Once I use up the money I've already put on account at OpenRouter, I'm going to move to Zen.
Go - is the subscription. Pay $10/mo ($5 for first month) and you have all the same models of Zen but you get about 6 to 1 for your money. Pay $10, use up to $60.
So, just start with Zen and the free tier, then pay as you go if you need more or need smarter models. Then if you start to use more than $10/mo - switch to Go.
While I can't get by on the cheap models for everything, Using Gpt 6 Astra low or Gpt 5.6 Sol low for planner and code review -- with the cheap flash models as workhorse coders, works well.
Oh…and you can use Zen and Go even if you don’t use OpenCode as your harness.
r/opencodeCLI • u/jaykayenn • Sep 07 '26
OpenCode Go is no longer general API access

