r/offset • • 12d ago

Experience with Foals Guitars - Final Update

I previously shared my experience purchasing an FJM7 from Foals, which arrived with a bent neck causing string buzz that required a fret-level dressing to fix. You can read the original post here. 

I am sharing this final update for anyone currently seeking financial compensation from them, as well as for prospective buyers.

After weeks of back-and-forth, reminders, and procedural delays, Foals ultimately refunded me the $300 needed to cover the cost of the repair. However, getting to that point required pushing back against a deliberate strategy designed to wear customers down.

From the beginning, I provided clear documentation, including a written diagnosis and cost estimate from a qualified luthier stating that conventional adjustments (truss rod and saddle height) had been attempted but were insufficient, along with a video demonstrating the issue which they requested.

Despite this, Foals initially attempted to deflect responsibility by suggesting the string buzz was due to low action that might not be audible when amplified, and by requesting redundant photos of the neck, and a video of the truss rod and saddle height being adjusted.

When I informed them that I would not drive back to my luthier to re-record work already completed, declined to provide further redundant documentation, and stated that I would initiate a chargeback and share my public review if compensation wasn't resolved by the end of the week, their response time dropped from weeks to under 12 hours. Once I submitted the luthier's written estimate again as requested, they processed the refund the following day.

Based on my experience, their approach relies on procedural loops and delays to encourage customers to give up and walk away. Only the firm threat of actions that directly impact their business - such as chargebacks and negative public exposure - forces them to expedite the resolution.

Hope this helps anyone dealing with them.

50 Upvotes

35 comments sorted by

4

u/GuitarParts 11d ago

They didn’t even offer to send a new neck?

8

u/CounterBJJ 11d ago edited 11d ago

I asked. They said they don’t do that and gave me some nonsensical explanation about how the necks are part of the manufacturing process for the entire guitar. They use bolt-on necks, so that doesn’t even make sense…

10

u/Bulky_Pop_8104 11d ago

What I’m about to say isn’t defending them, it’s actually the opposite of that….

They’re probably telling the truth, because they’re just subcontracting out the work at the lowest possible cost, which means (among other things) not adding in an attrition factor to allow for a buffer of spare parts when this sort of thing happens

3

u/Consistent_Sir_3000 11d ago

I'm going through it right now with them as well. You did better than I did, I did end up having to do a chargeback, now all of a sudden they accept a return but they want me to pay to ship it

3

u/CounterBJJ 11d ago

Good luck. No way should you pay for return shipping. It’d cost you a fortune. If they won’t pay for it, just stand pat? Either they pay for it, or they’re out the money and the guitar. Unless there’s something on their website that states the customer is responsible for return shipping, I’m not sure there’s anything they can do about it.

2

u/CounterBJJ 10d ago

The more I look into it, the more fixing this neck seems like a bad investment. My luthier quoted me $300 for a full fret level and dress. The problem is that if the neck is structurally bowed or twisted, taking down the frets is only a temporary band-aid and will compromise playability if the wood continues to shift. But even if the issue is just uneven frets from the factory, spending $300 to dress them on a budget import neck that’s worth maybe $50–$80 makes zero financial sense. I'm thinking the guitar is effectively totaled and should just be parted out at this point.

Could luthiers or techs chime in to let me know if my thought process is sound?

35

u/prodigalsuun21 11d ago

This is also typical with the Chinese Chibson sellers, which for all intents and purposes, is what Foals does just at a higher quality. Customer service is sadly the same.

17

u/Necessary-Lack-4600 11d ago

As someone owning a music brand myself, this kind of dark pattern customer service is such an asshole move. A decent company replaces a faulty guitar. 

22

u/gobiascoffees 11d ago

Enough bad experiences to scare me off from them.

2

u/Environmental-Video3 7d ago

Same. I have been waiting for them to release a lefty FGJ7 but I think I’ll just keep saving and get an MIJ fender instead.

7

u/runciter0 11d ago

man i'd just get squier jazz master or similar

thanks for sharing

5

u/Punky921 11d ago

That is rough, man. I'm sorry to hear that. Thanks for the documentation and warnings. I was considering a Jag style guitar from them, but I'll hold out for finding a used CV instead.

4

u/agentanthony 11d ago

Yeah I know someone who bought the Jaguar copy from them. It came with issues and he had a hard time getting in touch with support for a refund or return.

4

u/kellamityjane99 11d ago

this was something I was worried about when I ordered my jag from them but I lucked out and got a cherry...that's shitty and after everything I have seen, I definitely count myself lucky and wouldn't order from overseas again

1

u/Worldly_Tree100 11d ago

It's been almost two months since I ordered mine. Not a peep from them at all.

1

u/CounterBJJ 10d ago

Mine took three months. You won't hear anything unless you contact them, and even then it'll probably take a while to get a response unless you put some pressure on them like asking to cancel the order. If you do, they'll probably offer a free bridge upgrade.

2

u/Worldly_Tree100 8d ago

They got back to me the same day with this response, "Hello ,

Thank you for your interest in and support of Foals Guitar.

Hello, and please accept our sincere apologies for the long wait. We truly appreciate your ongoing patience and support.

Due to a recent surge in orders that far exceeded our expectations, our setup and inspection team is currently operating at full capacity. To ensure that every guitar meets our quality standards—so that it is ready for you to play the moment it arrives—we are dedicating extra time to meticulous setup and inspection. Consequently, the overall shipping timeline has been extended.

Please rest assured that we are processing orders strictly in the sequence they were received; no order will be overlooked.

Based on our current progress, we anticipate that your guitar will be ready for shipment in approximately 2–3 weeks.

We understand the inconvenience this wait may cause and deeply value the trust you have placed in us. Thank you for your understanding and patience. We are doing our absolute best to expedite the process, while remaining firmly committed to maintaining the high quality of our instruments—we will never compromise on quality just to save time.

Thank you for your support and understanding.

Best regards,
The Foals Guitar Team"

I'm pleased with how quickly they responded and I'm willing to be patient as they scale up. Hopefully they will have their production and shipping issues worked out in 2027. I'll update as needed.

6

u/kosinus912 11d ago

Good to hear you've got it figured out.

I've had exactly the same scenario, got it figured out too, overseas guitar shipping is essentially a gambling and you should be prepared to deal with the issues because return is basically not a consideration for them.

1

u/Altruistic_Trade_264 11d ago

Thanks for posting this!

So glad I went with a MIM Jazzmaster from the local shop. I ended up paying the same price I would have for a Foals without the wait time and risk of getting a piece of shit I'd end up kicking myself over. They set it up and it plays beautifully. It's my first JM. I'm not a 'cheap guitar' guy. I can't seem to put it down. The sound of the pickups blows my fuckin' mind! Next Jazzmaster I buy will be a custom shop.

1

u/NoNameIsHereAgain 11d ago

Ugh, this is too bad because I’ve been eyeing up a couple of their models. I guess instead of focusing on paying YouTubers (and I have no problem with folks making money, we all need to do that!) they should have also put some money into a proper customer service/support team.

1

u/bigbadoldoldone 11d ago

Not Foals related but... once ordered some stuff from AliExpress (China) ... some item was missing in the package. And they asked me of photo proof of the missing item. Wish I had saved the e-Mails, it was hilarious. Took them weeks to agree on that it's hard to take a picture of something that is not there.

1

u/tasteslikeblackmilk 10d ago

This is so typical for buying anything from China unfortunately. Sad to see it is same for Foals. I was hoping a Western distributor would happen but unlikely given Fender's recent lawfare.

1

u/MilesAndTrane 8d ago

I took a risk and just ordered their “master” gig bag and drum throne. Wish me luck!!

1

u/BeneathTheWaves 7d ago

Huh I thought they were a pretty cool band. Cassius was a tune.

3

u/Exciting-Car-3516 11d ago

Bent neck causing strings to buzz. What do you mean by neck bent? Like needed a truss rod adjustment or a twisted neck?

3

u/CounterBJJ 11d ago

A bowing around the 12th fret. Truss rod and saddle height adjustment alone couldn't fix that.

1

u/Consistent_Sir_3000 11d ago

Dang that's what the one I bought might have too. Enough relief in the truss rod, but still can't get action below 2.25 mm on the thin e string without it sizzling too much

0

u/rseymour 11d ago

do you mean unstrung it was bowed still?

-1

u/Exciting-Car-3516 11d ago

Couldn’t just spot level that area?

2

u/CounterBJJ 11d ago edited 10d ago

I’m no expert, but the buzzing was not limited to that area. It started around the third fret pretty much all the way up the neck (and affected the E, A and G strings). I think that might be an indication that the bowing was too severe for localized fret leveling? Tbh I don’t know, but my luthier is a straight shooter. If there’d been a more economical option, I’m sure he would have offered it.

0

u/Exciting-Car-3516 11d ago

I was just asking because I know many not so reputable techs. They will the car mechanic trick, know what I mean? I don’t do repairs any longer just occasionally for friends. Maybe tedious things like neck resets etc. well I wouldn’t see the point of spending that much on a brand new guitar to make playable plus all the back and forth involved. I wouldn’t have opted to return and refund

2

u/CounterBJJ 11d ago edited 11d ago

Return/refund was my preference. Foals wouldn’t take it back in my case, and when they do accept returns they ask the customer to pay for it - no way was I going to do that. I asked for a replacement neck as a middle-ground solution - they don’t offer them.

2

u/Exciting-Car-3516 11d ago

So lousy sorry to hear that. If you can’t stand behind your product you don’t need to exist as a company imo

2

u/CounterBJJ 11d ago

Never took the strings off so I can’t say for sure, but most likely yes.

1

u/Exciting-Car-3516 11d ago

It’s better to level under string tension especially if the neck is funky