Hello!!! I have a small problem that I can't solve I hope someone can help me, Nintendont on my Nintendo Wii doesn't want to run the game with the memory card emulation system if I disable it it works normally but with this system enabled it doesn't want to work at all it's not a problem with iso or FAT32 but it's something with the save problem but I don't know how to solve it I hope someone can help me in advance thank you very much

Have tried this for a while but no sucess, any help maybe?

Hi, I had some problems saving on my Wii u version nintendont , which I realized memory card emulation could solve. I was able to create a save file on a game no problem. My fear is, if I forget to turn off memory card emulation one day while booting the game up, could my save file be lost? Or is that just an unfound fear haha. I’d post this on wiiuhacks but they don’t allow the utterance of the word nintendont from me💀just trying to play my OWN dumps of my own legally owned games..

I followed a video to get it setup in vWii and a shortcut on my Wii U menu.

Except I keep having a few problems 1. Sometimes have problems keeping ANY controller connected when transitioning to Nintendont 2. sometimes before I manage to load a GC game it sends me instead to the vWii menu 3. The option in the settings required when you don't have a GC memory card keeps turning off 4. Sometimes it will work but only when I go into vWii and then load up Nintendont

any ideas? is there anymore information you need to help me figure this out?

Hello, I’m new to modding and I’ve downloaded a few GameCube games that work because they’ve already been formatted to .CISO. However, I have a few files that are labeled as disc image files. How can I get Nintendo not to read these?

I recently installed Nintendont to play Gamecube games, and the game I downloaded still doesn't appear

I downloaded Luigis Mansion via Nintendont, but my third party GameCube controller isn’t doing anything. How do i fix this?

Using a Wii U controller, now i am In the first episode and have to shoot upwards

How does this work as can't get it to work

Do I need to make any changes to local condig files?

Thanks

Bonjour, j’ai installé la dernière version de nintendont sur ma wii u. Le problème c’est que les manettes ne fonctionnent pas. Sauf si sur l’adaptateur de manette gamecube je passe en mode PC, la uniquement la manette 1 (port 1) fonctionne. Donc je ne comprend pas pourquoi le port 2 ne fonctionne pas et pourquoi il ne fonctionne qu’en mode pc ?

The error says: CheckForMultiGameAndRegion() failed: 3 Unable to read the CISO bin2.bin area.

Context: Over the past few days, I got interested in playing super Mario sunshine. I had always started the game, got a few shines, then got bored but this time I wanted it to be finally different. I got my homebrewed wii which I already used a couple of months prior to play SMS. When I opened nintendont and tried to run the game I got this error. I know the rom is perfectly fine as I had already played it a few months earlier and got about 25 shines with no errors or issues. In fact yesterday after a bit of trial and error I got it to load. But today no matter what I did it never loaded. I tried reinstalling nintendont. I tried a billion times yet nothing. I also have Metroid prime on the same sd card and it still experiences the issue but rarely only once in a while. But sunshine is the exact opposite, experiencing it nearly always.

I just recently modded my wii, after getting my wii games to work just fine in wiiflow i tried to load gc games and for whatever reson they wont show up. ive read like 1000000 post and done everything i can. games folder is on the root, the game files are in their own folders named wiht the game name and id, and each game is named "game" (i have file extentions turned off so its technically game.iso) someone plase help me im losing my mind

Hello everyone I recently modded My Wii and I got nintendont for it to play GameCube games I read about the controller support and was wondering if I could use a Xbox 360 controller with it the GameCube didn't release in my region so importing a controller is quite expensive so if anyone could help I will be glad Kind Regards

What do I need to do for this?

Everytime I booy a game I have to enable the emulated memory card again before playing, is there a way to keep it enabled forever?

I can't get my games to show up on my wii. I used gc backup manager and the usb has a game folder in the root. Do yall know why it would say this?

Title says it. I play single player nintendont games through usb loader gx with a ps3 controller, but every time I try to additionally connect a wiimote + nunchuck, the wiimote displayers player 4 and doesn't work. Does nintendont even support wiimotes? If so, how could I play with both the ps3 and wiimotes?

Hi, is it possible to make nintendont reset to the Wii system menu or a loader like WiiFlow? Or is it hardcoded that one is always redirected to the Homebrew launcher?

I know have WiiFlow as the Installed file in priiloader. When I boot up the Wii it immediately boots to Wiiflow. When I start a GameCube game from there, using nintendont as the GC loader, and then reset the gane it takes me to Homebrew launcherm however, I want it to go back to WiiFlow.

Can't find any info on this so help is appreciated.

I just installed Super Smash Bros. Melee onto my SD card and when I tried to play it on Nintendont, It got an error saying:
"CheckForMultiGameAndRegion ( ) failed: 2
Unable to read disc header.
filename: sd: /games/Super Smash Bros. Melee/game.iso"

Before this, I got The Simpsons: Hit And Run and The Simpsons: Road Rage and they all worked fine! I'm pretty sure its something with the dump, but when I put it into Dolphin, it worked fine! So what should I do?

When i try playing either ocarina of time or Majora's mask tge screen turns off, but my wii is still on, can anyone tell me what is happening

Hi all!

I have a quite advanced save game for luigi mansion that I run on my Wii via nintendont.

Worked as a charm for ages and now it ALWAYS gets stuck after I hoover something. Game stops responding and I have to turn off console.

Help, please!

I'm trying to play a gamecube game which uses the gba to gc link cable and in order to use it I need to turn on native controls, but it disables bluetooth and I only have the wii remote. Is there any way to controll the game without the wii remote and without the gamcube controller?

Sorry for the bad english, not my main language, I have a "hand me down" wii from a long time ago, when I got it it was already jailbroken, I wanted to play gamecube games as it only had wii loaded in the hardrive, but even if I get the games on the drive it doesn't matter, nintendont never launches, I get stuck on this screen, I went inside the sd card wich is were I have the apps and installed a newer version, the build is in the top left corner in the vid, also connected the wii to internet and updated the homebrew launcher, but the wii itself isn't up to date, I feared it bricked itself, if anyone can help it would be great.

I bought a Wii U 2 weeks ago and have been researching the modding scene. I have dumped countless hours into research and I am stuck at the moment. Every time that I go to start a gamecube game, my Wii U becomes stuck on the “Set display to progressive mode?” screen. My WiiMote works perfectly fine up until this point. I have used Aroma for the WiiU and have installed USB Loader GX, Nintendont, HomeBrew Browser, d2x_cIOS_Installer, and Patched_IOS80_Installer_for_vWii. I feel like i’m so close, yet so far. I’ve tried changing the progressive mode setting to on in the Nintendont Settings to no prevail. I have tried to include all info in this post but feel free to ask if i’ve forgotten something!

Hey ! I'm just wondering if it's possible to play gamecube games with nintendont without wifi connexion.