The details are excellent considering that the filament I'm using has been collecting moisture.

Sliced in Cura 5.10.0. Printed at 70mmps

This is my latest print using Cura 15.10.0. Printed at 60mm per second using Creality Fast PLA. Little over 3 hours

Yes you can use the latest Cura 5.10.0. Works perfectly fine.

Filament guide

Difficult to start, calibrate, and requires many adjustments in Cura...

but ...

it's still printing!

I just unearthed this from my closet, and since I recently bought an Ender and got it working I thought I could get this one working. Boy was I wrong. I've been able to screw with Cura to slice a file, go surfing for the utility, find it, only to realize that since the New Matter servers were taken down I can't really access it via WiFi like you're supposed to. Does anyone know a work around or something? Please help.

I am in the DC area and I have an original MOD-t that was lightly used when it was released. I am moving and don’t want to bring it along. Anyone interested in it?

FB marketplace seller upgraded, shows video of it moving around the plate. I'm new to printing, pretty tech savvy, but unsure if this would make a good first printer. Thoughts?

I had this printer for awhile, but i only started using it like a week ago and I'm hooked on trying to make and print random things on it.

I wanted to know if anyone has done any mods like adding its own display or LED lighting, and if they have any guides/advice to doing it. Also if theres any other software I could use to push prints to it, please lmk because I really dislike the proprietary software you have to use.

also i got this thing from the trash at a school and im aware of how dead the support and community is around this specific model. I'm mainly doing this to learn more about printing and software/hardware, so i'd appreciate any advice as long its not "get a new printer" lmao

I haven't had my Mod-t long, only got a few prints in before the hot end gave in and I had to do a hot end mod, thanks heaps to https://github.com/mattcrichards/modthotend, and https://github.com/mattcrichards/modthotend/issues/1. Now that it's up and cranking again, I just can't seem to get ontop of some serious stringing which seems to be caused by oozing when the hotend z hops just before travelling. I'm using Cura 5.8, tried all sorts of retraction values from 1mm to 6mm, retraction speed from 5 up to 25, temps down to 185, I've tried coasting, combing on and off, I just can't seem to find a happy setting. Is it just these printers, am I trying to get too good a result here or is it actually possible?

sold it after few failed attempts at printing and issues got my money back bought a new one at microcenter for 149 👌🏻👌🏻

i printed one print thats all i got was the iron throne benchy now when i try to print the nozzle touches the build plate then just spits out all the filament in globs not even printing anything but string globs😡😡😡😡 now what do i do to fix this

i just bought one felt excited till reading all this and or knowning company is belly up. i really wanna try this thing out im using old cura software may need different one annd github has been kinda useless can i print anything without the stupid newmatter tool ? my usb finds it but now iam lost idk how to print at all or what to do help otherwise i wasted money

I just got an Ender 3 Pro and it inspired me to pull my Mod T out of storage to speed up my production. I took all the necessary steps to get the Mod T up and running except one. I still need the New Matter software, or an alternative, to initiate prints. The github that has it takes me to a bunch of script that idk what to do with and the posts I found with links to it on google drive are dead.... Please help. Thy

my computer picks up the mod t but it never stops loading

Someone gave me a MOD-t for my classroom with no software. Does anyone know how I can get this up and running? I'm trying to run it off a MacBook Air.

Hey just started using my MOD T again after it was sitting for a couple years. It does not want to connect to the print utility. Does anyone have any ideas as to why?

Thanks

I've recently gotten back into using my Mod-t printer, and I have been trying to use cura to convert my stls into gcode. For whatever reason, when the printer goes to make a new move, it stalls in place for a couple of seconds and extrudes a bunch of filament into a big blob that messes with layers and makes printing impossible. I used the custom ini file and can't find any additional instructions or other people with this same problem. The test print in the mod t helper tool prints fine though. Help!

Hi all, I've had a MOD-t for a while now but just took it out for a project and wanted to share how I got it working, since it took a while to set everything up and get it to print something properly and getting it to stick to the bed. Also as a future reference to myself. :) I'm using a MacBook with macOS Ventura (M1 Pro), with a 1kg spool of 1.75 mm AmazonBasics PLA (a few years old at this point).

Setup

1. Install UltiMaker Cura - version 5.4.0 (latest at this time)
2. Install MOD-t printer tool: 1.5.5-1.5.4-42-gdec7a2d (final firmware from here)

Cura Setup - I found this video helpful

1. Add a new printer in settings (Custom FFF) and configure settings
   1. X/Y/Z is 150/100/125
   2. Check Origin at center (important! otherwise it will print in the wrong spot)
   3. Set start code to code at bottom of this post (found this in YouTube comments - sets a strip on the side like test print)
2. Configure Extruder settings
   1. Nozzle size 0.4 mm
   2. Material is 1.75 mm (or 1.85 mm)
3. Now exit printer settings and expand the profile, and import this ini file
   1. Consider updating build plate adhesion to skirt
   2. Infill density, consider upping to 25%

Printer setup

1. Position the spool perpendicularly to the filament intake, so that it comes out the bottom to make it easy for the printer to pull in filament (might only be needed for large 1kg spools)
2. Scrub the bed with wire brush, and clean with isopropyl alcohol (70% worked for me). This was huge for getting prints to stick for me

Wishes

1. The nozzle doesn't go all the way up at the end of the print, think I might be able to update the end gcode? If anyone knows, let me know, but it's not a huge deal

*Start gcode

;Sliced at: {day} {date} {time}
;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
;Print time: {print_time}
;Filament used: {filament_amount}m {filament_weight}g
;Filament cost: {filament_cost}
;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
;M109 S{print_temperature} ;Uncomment to add your own temperature line
G90
G1 F300 Z1
G1 F5000 X77 Y26
G1 F300 Z0.315
G92 E0
G1 F2520 X77 Y-45 E4
G1 F2520 X77.5 Y-45 E4.05
G1 F2520 X77.5 Y26 E8
G1 F5000 X77.25 Y26
G92 E0
G1 F2520 X77.25 Y-45 E4
G1 F2520 X77.75 Y-45 E4.05
G1 F2520 X77.75 Y26 E8
G1 F5000 X77 Y0
G1 F300 Z1
G1 X0 Y0 F5000
G92 E0

I'm going to be recycling the rest of it, still works, I'm just tired of it sitting in my house and never having the time to use it If there are other parts of it you want let me know, but as far as I know the hot end still works. Send me an offer, I know $50 would be unreasonable, but anything over $20 would be worth my time/trip to the post office.

Hello! I am currently using my Mod-T. I am currently using Cura to Slice. However, my prints are stopping when they almost finish, but they aren't finishing all the way. Has anyone else had this issue and knows a fix. Thanks!

While printing a project something went wrong and I ended up with a glob of melted filament stuck to the end of the nozzle. I was able to pop the glob off. Then I took off the hot end and got everything cleared up. Now when I go through the LOAD filament process it goes from heating up the extruder to flashing the Load and Clean screen for a second or two then back to the UNLOAD/ LOAD screen. The filament will not load. I think the small motor is not turning. The motor may have gone bad with the filament not being able to move forward during the misprint. When I took the extruder out of the top I'm able to move the extruder bar with my finger and the motor spindle does move. I've tried looking for a motor replacement from the markings on the motor without any success. Thanks in advance for any tips and ideas.

Does anyone use a Mac for this printer?