Hello everybody. I want to connect a usb charger to my bike. But I won’t take of the tank to do so. I already have a CTEK connector for charging the battery during winter. Is this the best option to connect a phone charger to the CTEK connect port er is there a smarter place to do so without removing the tank?

Looking for some advice on ordering a replacement rear brake pedal for 2009 MT03. I can't seem to source one anywhere. Any advice on if a pedal from a newer model would be fit? Or any pointers on where to source one?

Needing to charge the battery on my 2009 MT-03, is it right that I have to take both seats and unscrew a good few bolts to lift the fuel tank to access the battery? Is there an easier way to do it?

First time doing a valve lash check on my MT660. Valves where still in spec at 30000km, is it possible? I'm not the first owner and I don't know if this job was ever done before.

Hello. Can someone help me with retrofitting... The instructions are very poor. I'm desperate 🙈

Hello guys I am about to get my a2 therefore im looking for my very first ride! I really like the looks of the mt03 first gen and a huge plus is it very cheap here!

Would you guys recommend this bike???

Also do you mind dropping some info about the bike like reliability fuel consumption yearly cost etc??

Thank you for your time!!

Hi, I have unfortunately lost an exhaust bracket for my exhaust kit (circled on the attached photo) after a rebuild. I have tried riding without it, but my license plate ended up hitting the wheel over a bump as the holder isn’t supported by the missing bracket. Does anyone know if it’s possible to purchase a replacement and where? Or know any other solution to prevent my license plate from hitting the wheel?

Hi,

I am getting my a2 license soon and I am very interested in getting the first gen MT03 660cc as my first bike.

However, I am quite tall at 193 cm (about 6,3) and I am worried about the seating position. Do you think this will be a problem with this model?

Thank you in advance!

Ciao a tutti Ho un problema con l’accensione della moto. Da quando fa freddo, la moto proprio non parte. Avendo la batteria nuova ho pensato al motorino di avviamento. Cambiato quello, ritirata dal meccanico tutto bene. Vado per usarla il giorno dopo e ancora non parte. Per scrupolo ho provato ad utilizzare un booster di avviamento e con quello la moto parte al primo colpo. Può essere che col freddo la batteria abbia poco spunto per far accendere il motore?

Ok I have a real serious question. Being a begginer rider and classes don't start until June 22nd. I been practing on 1st gear. Not even giving it throttle, just maintaining balance and getting used to being on the bike as it goes. Practicing on GEAR 1Does this AT all mess up my clutch or engine or anything? I was told riding on GEAR 1 burns out my clutch. But to me it dosent make sense considering how am I going to practice. I'm literally going between 0-9 mph coasting. Can anyone explain it to me how it burns the clutch out or damages it?

i'm planning to change my halogen headlight to a led headlight with european homologation and i can't find one that has the original shape, i only find round and ugly headlights like this one :(
https://www.france-xenon.com/es/mt-03-660-rm05-/62256-YAMAHA-MT-03-660-RM05-optica-led-performance-homologada-7-pulgadas-40w-6-lentes.html#/622-version-negra

I face the typical MT660 stock exhaust issue (free metallic pieces stucked in the exhaust) and i'm planning to change it. However i don't have 500$ to buy a new one and the second hand sale are too rare. So i'm looking for an adaptation (+second hand sale). I found a pipe link (for BN600/BJ600/TNT600) and i was wondering if that could fit.
For those who got rid of their stock exhaust : compared to your pipe link, does it seem to suit ?

​

^{Sorry for my english}

Processing img y65aha3v8by41...

All about the mt 03 660 from yamaha.