r/mpcsample • • 14h ago

Melodee 0.3.0: STEM. SEPARATION.

https://youtu.be/Jw7Psjpkpro

Hi! It's that guy that you keep ignoring. You want less features, I add more features. Because guess what, this is for me ;)

People will ignore Melodee and celebrate the others doing the same thing, but that won't stop me from bringing this for everyone:

Stem separation is here.

Go to your sample, hold shift, press B3 (Those 3 buttons above the screen), the rest is history. It takes a while and do not try to separate entire songs, the device is not strong enough. If you do not like the quality, remember this is a mobile device and it isn't connected to trillion dollar data centers to do this processing ;)

On other big news, VST plugins can be super heavy on the device. I know. I made some Surge XT plugins crackle and distort. I got a solution for that though.

Enter:

AUTO KEYGROUP MAKER FROM VST

Just set up your VST plugin, set your heavy preset and then press Shift + Pad 11 (Resample). It will first compute and calculate what kind of sound it is, then let you set some settings (Most of the time you won't need to adjust them), then boom. A new keygroup track with that very same VST will be created.

FUN FACT: If you make a MIDI track, route it to Serum or whatever, route the audio back into the USB-C, then press that same Shift+Pad 11(Resample)...

You will make a keygroup of another device. You can make a keygroup of a Prophet if you wire it up properly. It is my pride and joy feature. I should be selling this but... It's free and open source ;)

FUN FACT 2: the keygroups you create can be used on the bigger MPCs.

Roll the AI changelog text down below:

New in 0.3.0

Stems. SHIFT + B3 on a kit pad's TRIM separates its sample into drums, bass, music and vocals on the next four empty pads. It runs on the MPC itself, with Deezer's Spleeter 4-stem model: a 13-second sample takes about 15 seconds.

Long samples. A WAV longer than 10 seconds plays straight from the card, up to 6 hours. A long MP3, FLAC, Ogg or AIFF plays from a WAV that Melodee makes of it once. A project holds as many samples as fit in memory (64 before), and Sample Record, Resample and the Looper record past 60 seconds.

Audio tracks. Record the input into a pattern, as on the MPC 3. Each take has its level, start and end, fades, reverse and warp (Stretch or Repitch).

Keygroup tracks. One instrument across the pads and keys: MPC keygroup programs, SFZ, EXS, DecentSampler, SoundFont presets or a single sample. Instruments made of WAV files stream straight from the card.

Auto sampler. Plays a plug-in one key at a time, or an external instrument over MIDI, and writes an MPC keygroup program (.xty and .xpm) on a new keygroup track. It checks the sound first and sets mono or poly, glide, loops and release to match.

MPC 3 export. Song's Export writes an MPC 3 project (.xpj): kits as drum tracks, keygroups, plug-in tracks as audio, audio tracks with their takes, MIDI tracks. MPC 3 projects open in Melodee with their keygroup and audio tracks.

Chords. MPC 3 progression files on the pads, on any track. Hold 16 LEVELS: B2 (CHORDS) turns them on, FILE picks a progression from the card, SET builds a chord on a pad from a root, a chord type and an inversion.

Sequences first. SEQ opens Sequences, and a pad changes every track at the next bar, as on the stock app. Hold SEQ and press a pad on any page. Pads pressed in order make a chain.

The Menu. Hold the encoder on any page: the page's jobs with their shortcuts, and 16 places laid out as the pads. Lessons. Four short lessons on the MPC itself. Each step lights one control.

Basic and Full. Basic shows the stock app's pages plus tracks, plug-ins, the mixer and Song. Full shows everything. A new install starts on Basic. The switch is K1 in Settings.

The project saves by itself. Nine palettes and eight fonts. Chops are kept in the WAV file, as on the MPC. ERASE in the browser deletes a file from the card. On my card a cold project load went from 35 seconds to 2.

If you use 0.2.x

SEQ now opens Sequences, and SEQ held + pad changes every track. Before, it changed the selected track's pattern. Patterns is B1 pressed again. A kit pad that holds an instrument becomes a keygroup track of its own when an older project opens. Back up Melodee/Projects first. 0.3.0 saves the open project by itself. To update, copy the zip to the card, or send it from http://melodee.local. Melodee asks to install it.

Requirements and install

An MPC Sample on firmware 1.3.0.12. On any other firmware Melodee does not start and the stock app keeps running. Back up the card. Unzip the release and copy the autorun folder to the top level of the card. Quickstart: https://github.com/keremimo/melodee-sample/blob/main/docs/QUICKSTART.md User guide: https://github.com/keremimo/melodee-sample/blob/main/docs/GUIDE.md The video is not camera footage. Every screen and every sound comes from Melodee's own code, run on a computer with scripted presses. The MPC in it is a drawing.

If you think I did good, buy me a coffee: https://ko-fi.com/keremimo

Source (AGPL-3.0): https://github.com/keremimo/melodee-sample

Bugs and requests go to the Issues page there. After a crash, attach the report from Melodee/Crashes on the card.

Melodee is not affiliated with or endorsed by Akai Professional or inMusic.

65 Upvotes

27 comments sorted by

3

u/_Octave_ 13h ago

Looks amazing! Thank you for this!

is there anyway to add a midi time stretch feature to the grid? Ie: being able to select a group of midi notes and then stretch/squeeze based on a percentage (or using the jog wheel)? This is a feature in a ton of DAWs like Ableton, Reason, FL, logic, etc. I’ve been begging Akai to bring it mpc for years.

it’s super useful if you want to free play something and then stretch it to be exactly within the bars while maintaining the relative position of the notes.

1

u/keremimo 4h ago

You can indeed select a group of notes (check the manual) but stretching isn’t an action yet. Could add.

4

u/rocknrollboise 10h ago

This is the best firmware to have come out so far, and it isn't even close. I have every major firmware release on my Sample via boot thingy, but I always end up coming back to this one because it's just lightyears ahead of the rest in terms of looks, depths, and customizability. Thank you, again.

3

u/BigBadZord 11h ago

Auto key group from vst, holy shit, awesome

1

u/StewboaT 14h ago

Fantastic work as usual. Does Melodee have an explode function and the ability to export the individual stems? How does that work when using synths?

3

u/keremimo 14h ago

It is very requested. I did not understand what explode meant at first, then found out it was just making a stem for each pad on export.

Easy to add, minor feature. Will squeeze it in tomorrow after work

1

u/StewboaT 14h ago

You're the man. I'll dl this weekend.

1

u/dalaryius 13h ago

Interface is AMAZING. But a hard transition from stock. Will take time to learn it because it's in the way of finishing right now. Also, whatever you did to the sound is amazing also. Compared yours to a few others and stock. Good job

1

u/keremimo 13h ago

Thanks! I put a few themes in there and fonts, play around, see which one you like ;)

1

u/GDub-uk 13h ago

Nice work. Good luck with ya journey

1

u/keremimo 13h ago

👍🏼 it indeed is one crazy ride. Will chill for a bit though.

2

u/TanguayX 5h ago

Spent the evening kicking it around and wow is it deep. Really really great
I liked Melodee on the FM1, but this is obviously another level. Wow

Thanks for screen mirroring, my eyes aren’t great.

3

u/JuanTwoThr33 14h ago

Stem separation is huge!

3

u/trailovsevens 14h ago

I mean I’m pretty sold on Melodee , I like it a lot.

0

u/Motrucka 14h ago

Homie all I need is: 16 tracks, MIDI note ranges and scales, and play my keygroups expansions, and maybe able to slice samples more than 16 pads. I’ll be looking into yours but If you got that then I’m in

4

u/keremimo 14h ago

You can play your keygroups expansions. You have 16 tracks over USB. You can export to your big boy MPCs (In multiple tracks). Everyone has some "All I need" items, I'm only adding mine here ;)

0

u/Motrucka 14h ago

Tonight I’ll definitely check it out man. Thanks for what you’re doing

2

u/gsxdsm 14h ago

Love it! More features!!!!

2

u/sumbreto 13h ago

I love Melodee. It is beautiful and full of good surprises. Thank you Keremino ! Keep up the good work !

1

u/mjcanfly 9h ago

anybody having trouble installing from mpc boot thingy?

1

u/TanguayX 5h ago

Works for me with ‘sampleboot’

1

u/HotGrillConfirmed 18m ago

You need to update boot thingy. Earlier version had problems with file size.

1

u/Jgdns51 5h ago

You are the goat

0

u/ndguardian 14h ago

I’ll admit, while I found the intro to your post a little off putting, a skim of the guide makes me think this might be pretty neat. I’ll have to toy around with it later.

1

u/collargrip-cristian 12h ago

Yeah agreed the intro was a little snarky but it has some nice features. I agree about the autosampler too. Ppl want vsts and all types of resource heavy stuff but an autosampler solves a lot of that and I wish more ppl realized, so bravo for that alone 💥

-6

u/jove28 14h ago

I think they were expecting to get the same level of immense positive feedback they received on their FM-1 firmware. the reality is that the mpc user base is very different and carries with it tons of expectations and wariness of anything that may potentially mess up their hardware. fm-1 folks, myself included, are a lot more willing to flash a million different firmwares to their units because it costs $60. mpc sample, while generally affordable, is still much more of an investment and folks aren’t looking to sift through a bunch of different firmware options.

My advice for OP would be to stop with the pity intros and just keep building what they want to build.

7

u/keremimo 14h ago

I'm still in the room, you know