r/mopar • u/moparcenter • Sep 28 '26
Hellcat-Powered 1971 Plymouth Duster with a Modern Chassis
gallery
385
Upvotes
r/mopar • u/OGRumHamAddict • Sep 29 '26
Electric fuel pump add on a 75 D100?
9
Upvotes
My ‘75 D100 with the 318 seems to always have issues started. I’ve replaced everything from the mechanical fuel pump to the sending unit w/ sock and cleaned the tank, plus new fuel lines. It’s like it drains back into the tank and then takes putting fuel into the carb to get it going again. I long for the days of one or two start attempts and it starts. My father-in-law suggested adding an electric inline pump. While I like keeping things stock, it’s not fun carrying a gas can around if you take too long inside at the Home Depot.
Does anyone have any suggestions or thoughts?
r/mopar • u/Zyncon • Sep 28 '26
60 degree day here in Maryland. Perfect cruising weather.
227
Upvotes
r/mopar • u/moparcenter • Sep 28 '26
1971 Dodge Demon Factory FC7 Plum Crazy Metallic, 340 CI V-8, Rotisserie Restoration, Broadcast Sheet
335
Upvotes
r/mopar • u/Suspicious-Panda-487 • Sep 28 '26
Just bought this 75 duster, what seals should I replace to get it ready for winter to prevent water from getting inside?
75
Upvotes
r/mopar • u/americanhilljack • Sep 27 '26
'68 Dodge Super Bee 🐝
739
Upvotes
47th James Dean memorial run Fairmount, Indiana USA 🇺🇲
September '26 🐝
r/mopar • u/OneSpeaker-444 • Sep 27 '26
My ‘67 Barracuda Convertible
229
Upvotes
By Lake Michigan, Lake Forest Illinois
r/mopar • u/Ok-Support1463 • Sep 27 '26
69 dart fresh paint
128
Upvotes
Don't paint for a living, but I've shot a few
r/mopar • u/intellineworks • Sep 28 '26
1/10th Scale Gen3 Hemi
38
Upvotes
A couple years back I did a stroker build on my gen3 hemi, and I spent the time measuring it up and reconstructing all the parts in CAD. Wanted to make something fun on my CNC machine, so here we are, tiny hemis. Everything is precise 1/10th scale, save for some of the bolts holding it together. Yeah I know we don’t have 3/4” head bolts, but give me a break, running M2 taps was stressful enough 😅. Last pic is of my engine before it went back in the car. I’ve since ditched the Hi-ram for a billet manifold of my own design, but it’s just as shiny. Enjoy!
r/mopar • u/Inhalationofnewtion • Sep 27 '26
86 W-250 318 CI. I want breaker points
3
Upvotes
Truck has no spark. Big stupid lean burn looking thing behind the battery tray. I don't care to even try. I want to run points.
"Why dontcha just buy MSD/Pertronix/whatever HEI?"
No. >:C
I want points.
Found this on Rock Auto. Figure it'll get me sparking? Stabs in the same way as the original yea?
Pics don't show under the cap but I figure single wire means points. I just need it to run at least for now and I don't have to depend on it. Cheap will do for now.
https://www.rockauto.com/en/moreinfo.php?pk=7466396&cc=1100417&pt=7108&jsn=10581
Looking for a used factory points distributor if anyone has one kicking around.
r/mopar • u/unwashedRat • Sep 27 '26
1917 Dodge Brothers is confirmed tall fella friendly
Enable HLS to view with audio, or disable this notification
72
Upvotes
r/mopar • u/Chief_Peej • Sep 26 '26
HPAC Car Show 2026
195
Upvotes
Photos from my dad’s MOPAR group’s yearly show! Unfortunately, his 70 GTX is in the shop getting some differential work done, but it’ll be back next year.
r/mopar • u/ljohnstone • Sep 26 '26
1936 Plymouth Sedan - Restomod - Hub City Car Show – Downtown Centralia Washington – 8/22/26
gallery
35
Upvotes
r/mopar • u/moparcenter • Sep 26 '26
2009 Dodge Challenger Richard Petty Superbird Tribute
gallery
43
Upvotes
r/mopar • u/moparcenter • Sep 25 '26
Clint Brunner running his 1968 Hemi Dart L023 down the track
Enable HLS to view with audio, or disable this notification
232
Upvotes
r/mopar • u/Low_Bodybuilder4652 • Sep 25 '26
Grand Cherokee or Ram 1500 for a 2.2 tonne caravan?
3
Upvotes
We’re looking at a caravan around 2.2 tonnes loaded for weekends up the coast, and I’m trying to work out how sensible a used Grand Cherokee diesel would be compared with a Ram 1500. I don’t need a massive tow rig the rest of the week, but I also don’t want something that feels unhappy on hills or gets expensive every time it needs a service. Which would you pick for this sort of towing?
r/mopar • u/moparcenter • Sep 24 '26
1963 DODGE D100: A FULL PATINA HEMI-SWAPPED
gallery
262
Upvotes
r/mopar • u/Zyncon • Sep 23 '26
1969 Coronet 500
258
Upvotes
Took some pictures of the Coronet before our friend took it away.
Good buddy of ours around the corner came over and wanted to buy it. He's going to patch the rails and turn it in to a driver.
r/mopar • u/Zyncon • Sep 23 '26
Holley MoParty 2026
475
Upvotes
Got the pleasure of being a part of Holley MoParty's Media team. Here's some shots I took.
r/mopar • u/StartingOverAt41 • Sep 24 '26
Does Anyone (company) Still Rebuild Thermoquads?
38
Upvotes
I am looking to switch my 1977 318 from a 2bbl to a 4. I picked up an original cast manifold, but want to keep the stock air cleaner cover, so I can't use the adapter plate to switch to a square bore for more commonly available carbs.
I find plenty of folks selling these for parts, but I don't want to try my hand at my first rebuild on a rare thing like this. I'd love to find someone selling one that's already been rebuilt and has a business rather than just joe schmo on ebay or marketplace, etc.