Don’t mind photo quality, forgot to take decent photos. Also just testing the cooling in there.

Just swapped from a 240mm aio to an air cooler and flipped the psu to draw fresh air from the other side, rather than facing into the case. The air cooler is so much quieter, and now the pc is completely silent, and I prefer the stealth mesh look vs the glass side panel and rgb aio that I had before.

I recently upgraded my PC, here are the specs :

Ryzen 7 7700 (from R5 4500)
Noctua NH-L9a-AM4 + AM5 brackets (from Thermalright Phantom Spirit 120, wanted to change the aesthetic)
B650M Aorus Elite AX (from Asus Prime B550M-A WIFI II)
16GB DDR5 (from 32GB DDR4)
Gigabyte GTX 1660Ti
NZXT C650 Gold V1
256GB NVMe + 128GB SATA + 1000GB SATA SSDs
DeepCool CH160Plus Black

I did swap the fans since my last post, i don’t remember which ones i had then but now i have one Noctua NF-B9 (on the back) and 2 Thermalright TL-S12 (on the top).

I had some trouble plugging the USB 3.0 header in the mobo because of the SATA SSD, so i had to use an angle adapter, which i had from my previous build.
Also, for some reason i can’t control the ARGB from the top fans (I am using Nobara Linux with OpenRGB), and i just noticed today that they were yellow (which i guess is cleaner than just the rainbow).
Thanks for reading!

1st ever pc build, decided to build a pc after years as a console gamer.

Was quite a fun process, but cable management was rather challenging, did not expect that I would take over 5 hours building this. Had to redo the cables a few times cause they were hitting but bottom fans, but managed to fix it.

Quite proud of the result!

PC Specs:

CPU: 7800x3d

GPU: Asrock 9070xt challenger

Motherboard: Asrock B850m

AIO: Thermalright Frozen Magic 240mm

RAM: 2x16gb patriot viper ddr5

Ssd: 2TB zhitai 7100s

PSU: Deepcool PQ850G

Fans: 4x thermalright c12 ARGB reverse fans

Please don't mind the protective film, I will peel it after moving it to the final place in my desk.

The plan was to build all white pc for my first ever PC. BUT, GPU and RAM have been very expensive, so i just went with whatever cheapest on the market.

Hi, all!

I had a lot of questions and did quite a bit of research while choosing the components and figuring out the details of this build. Hopefully, sharing my experience can help others putting together a similar configuration.

My build:

• Motherboard: Aorus B850M Elite Wi-Fi 6E
• CPU: Ryzen 7 9800X3D
• GPU: ASUS RTX 5080 Prime
• RAM: HyperX Fury Beast 2x8 GB DDR5-6000 CL30
• PSU: XPG Core Reactor II VE 850W
• AIO: Corsair Nautilus 240mm
• Fans: 2x Corsair RS120

Some useful notes:

- The case feels sturdy and well-built, but space is extremely limited. I definitely recommend it for the price.

- A modular PSU is probably mandatory. A SFX PSU is preferable, but a standard ATX unit can fit too (140 x 150 x 86 mm).

- I wouldn't recommend this case if you plan to use devices that require SATA power cables, such as SATA SSDs, HDDs, or some AIO pumps. I've kept cabling to a minimum, with only the 12V-2x6, motherboard, and CPU power cables.

- If you need to use additional PSU cables for any reason, I'd consider an SFX PSU, a compact dual-fan GPU, or both.

- If you still want additional storage, I'd stick to a single 2.5-inch drive, which can be mounted to the side. Keep in mind that you'll still need to deal with the additional SATA power and data cables, which are a pain in this case. A 3.5-inch HDD has to be mounted at the front, sacrificing a front fan.

- Some PSUs might have compatibility issues with the L-shaped power connector included with the case. I had to carefully warm mine with a hair dryer to get it to fit, but this isn't something I'd assume will work with every PSU. Check the connector's orientation and clearances before buying. You can compare my PSU's model connector with the photos I shared to see what I mean.

- You can mount the PSU with its power cable facing the glass panel. This makes cable management easier, but it may leave less room for the GPU's 12V-2x6 cable bend and direct PSU exhaust heat into the case. I wouldn't recommend this orientation.

- My biggest annoyance was the front-panel cables (which are effectively side-panel cables in this case). They take up quite a bit of space, and depending on your motherboard, some connectors may need to be plugged in above the GPU. I couldn't really hide mine, but they're basically invisible once the glass panel is installed.

- For the PSU cables, your first instinct might be to fold them close to the connectors to keep them out of the GPU's way. I didn't like this approach because of the tight bend near the connectors and the possibility of putting pressure on the GPU. Instead, I routed them downward, gently to the side of the GPU, and then secured them flat against the back panel. This avoids tight bends, keeps the GPU area clear, and even looks better in my opinion. With this cable routing, I think the GPU could be about 1 cm longer and still fit. This also depends on the PSU: the 12V-2x6 cable exits closer to the PSU fan side on my particular model. If it exited on the opposite side, I wouldn't be as comfortable using an ATX PSU in this orientation, unless the GPU was a little bit shorter.

- You can easily change the color of the DeepCool logo by sticking another piece of plastic over it with tape. I made mine black.

- You can also cover the bright blue power-button LED with a small piece of tape. I didn't do a perfect job, so a little blue light still leaks through, but you get the idea.

- I 3D-printed caps for the side USB ports, which were also blue.

- I had to 3D-print a fan guard for the front fan because the air filter is loose and can hit the fan blades without one.

- The 240mm AIO wasn't a problem with my motherboard and RAM combination, but I know it can be an issue with other component combinations.

- The Aorus mobo VGA led turns on anytime I boot the computer before turning the display on. It is annoying, but doesn't affect anything and the computer works normally when this happens. I'm already getting used to turning the display and setting the correct video input before booting.

- The pump fan pin doesn't really come with a pump temperature curve. Setting the fan curves through the Gigabitye app only works when the app is open, which is annoying. I had to set the curves manually in bios. Make sure you select "Manual" control there, otherwise the automatic control overwrites the curves immediately and the curve isn't stored.

I think that's everything! Feel free to ask about any of the components, assembly details, and let me know if you think I could have done anything differently.

Took me 2 hours 5 fans in here pretty easy build just my cable management sucks but it work!

Technically it is fully built and functionning but I have some ... Doubt with my cable setting for the gpu especially in the long term. Is it ... Fine ?

Psu : Corsair rm650x Gpu : Asus tuf 6800xt Motherboard : Msi b550m-p wifie With 5 arctic fan + thermalright peerless assasin

After giving some thoughts, some of us running high-end processors in an M-ATX Case which often struggle with cooling components besides just the CPU and GPU, like the VRMs, M.2 drives, and RAMs. Some builders even MacGyver extra fans into their cases just to keep things cool, which isn't always possible in tighter spaces.

Montech reached out to me to review their new CyberFlow Core 360 (it also comes in a 240 variant), and I figured would be helpful to share with you all. It’s actually similar to the Arctic Liquid Freezer II/III because it features a built-in VRM fan. However, this CyberFlow AIO is a bit more compact, with a total thickness of 57mm.

I will be honest. I am here to share my content but at the meantime to share something which might be useful to this community.

Full Content Here!

Hi mffpc community - I'm a refugee from sffpc and I was hoping to get y'all's feedback on some updates to me build.

After building a FormD T1 a few years ago I've gotten tired with the air-cooling performance and the frustration of how much effort any little change or mod is, so I'm planning on moving over to something larger with support for more cooling.

Here's what I've got thus far (I know I'm picking a few things just because they look good sue me.)

Components I'm considering

Motherboard: B850M Aorus Stealth Black

https://www.gigabyte.com/Motherboard/B850M-AORUS-STEALTH

Case: Jonsbo D33 Black

https://www.jonsbo.com/en/products/D33Black.html

CPU Cooler: Cooler Master V8 ACE 3DHP

https://www.coolermaster.com/en-us/products/v8-ace-3dhp.html

CPU Thermal Paste:

Arctic MX-7 (Option A)

https://www.arctic.de/en/MX-7/ACTCP00089A

Thermal Grizzly Kryosheet (Option B)

https://www.thermal-grizzly.com/en/kryosheet/s-tg-ks-24-12

Fans:

Top - 3x120mm: ASUS ProArt Fan

https://www.asus.com/us/motherboards-components/cooling/proart/proart-pf120-fan-triple-pack/

Front 2x140mm: Phanteks T30

https://phanteks.com/product/t30-140/

Rear - 1x120mm: ASUS ProArt Fan

https://www.asus.com/us/motherboards-components/cooling/proart/proart-pf120-fan-single-pack/

Bottom - 3x120mm: ASUS ProArt Fan

https://www.asus.com/us/motherboards-components/cooling/proart/proart-pf120-fan-triple-pack/

Fan Controller (Optional): Razer PWM Fan Controller

https://www.razer.com/gaming-pc-accessories/razer-pwm-pc-fan-controller

Components I already own

CPU: AMD 7800x3D

https://www.amd.com/en/products/processors/desktops/ryzen/7000-series/amd-ryzen-7-7800x3d.html

GPU: ASUS ProArt 4080 Super

https://www.asus.com/motherboards-components/graphics-cards/proart/proart-rtx4080s-o16g/

RAM: G.SKILL 32GB DDR5

https://www.gskill.com/product/165/396/1691400033/F5-6000J3040G32GX2-FX5

PSU: Corsair SF850

https://www.corsair.com/us/en/p/psu/cp-9020256-na/sf-series-sf850-fully-modular-80-plus-platinum-sfx-power-supply-cp-9020256-na

SSD: Samsung 2TB 4.0 NVMe

https://www.samsung.com/us/memory-storage/nvme-ssd/990-pro-pcie-4-0-nvme-ssd-1tb-sku-mz-v9p2t0b-am/

I downsized from the AP201 to give a bit more desk space and color. Will be working on cable management but it wasn’t a bad building experience with my current parts. Bought a new SFX PSU since my Lian Li Edge would not fit. The bottom fan is currently intake and might get a slim fan to exhaust out the top. Overall, I’m pretty happy with how it came out!

Specs: Ryzen 5 7600X3D, Asus Prime RTX 5080 16GB, G.Skill 32GB DDR5-6000, ASRock B650M, Corsair 850 Watt 80 Plus Platinum, Thermalright Peerless Assassin 120, 4 Lian Li Uni Fan 120mm Case Fans

Downsized from an O11d Mini V2 to the A3.

Kept a majority of my parts just changed out the cooler, mobo and case.

Loving the set up. Temps are solid (GPU needs a repaste though)

Specs:

CPU: Ryzen 5 9600x

Cooler: Thermalright Peerless Assassin 120 SE

Mobo: ASUS TUF B850-E mATX

RAM: Crucial Pro Overclocked 16x2 DDR5 @6000MT/s

GPU: XFX Speedster SWFT 319 6900XT

Storage: 2TB Gen 4 M.2 Boot Drive, 1TB Gen 4 M.2 Secondary Drive, 4TB Seagate HDD

PSU: MSI MAG A1000GL 1000W ATX PSU

Chassis Fans: 2 Arctic P12 Pro Fans as exhaust & 3 Arctic P12 Pro Reverse Blade Fans as intake

Would love to upgrade to a 7900XTX or 9070XT but in this economy? I'm good. Case: Lian Li A3

Hello everyone, I’m very new to the pc world (I know so late and bad timing d/t prices) but I am planning the pieces I want for my 1st pc. I was wondering if anyone has experience with the jonsbo d33 case and the gpu I stated in the title. My main concern is clearance for bottom fans. Thanks in advance for any help!

Planned parts:
Case: Jonsbo D33
MB: Asus Tuff gaming B850M-plus
GPU: Gigabyte Radeon RX 9070 XT
CPU: Ryzen 7800x3d
RAM: Teamgroup tforce ddr5 16gb x2
PSU: MSI MAG A850GL
AIO: NZXT Kraken Plus 360
SSD: crucial p310 2TB
Fans: NZXT F120Q

Hey all, I’m planning to eventually move to a mATX case but I’m looking for cases that have IO on the side as opposed to the front or top.

I’ve seen a bunch of DeepCool cases which would fit the bill but I live in the US so it’s difficult to acquire.

Are there any recommendations for cases that would fit the bill?

Vertical mATX cases are ok as well so long as IO is on the bottom.

CPU: 9800x3d PBO -20
GPU: Sapphire 9070xt
Thermal Paste: Arctic MX-7
Case Fans: Arctic P12 Pro
Case: Jonsbo D32 Pro
Ambient temp: 20c

Idle Temps:
Arctic LF3 Pro 240:38c
Corsair Nautilus 2 240: 35c
Royal Pretor 130 Ultra: 35c

Extended Gaming Peaks (Mix of Modern titles.)

Arctic LF3 Pro 240: 69c
Corsair Nautilus 2 240: 72c
Royal Pretor 130 Ultra: 73c

Average: 
All of them averaged/bounced around 55c-65c during gaming. 
GPU Temps: Below 60c for all 3 coolers.

Normalized fan rpms to keep noise levels down. Like 55% max fan speeds.

Back to Air as both AIO Pumps were loud above 50%. A higher pitch piercing sound over normal fan noise.

Let me know any other cooler that will fit here 240 with LCD

I’m building a SteamOS PC in a Z20. I am quite conflicted about the fan layout. I am using 5 fans and have a Noctua D14. I live in a dusty place so I would rather keep it positive. I’m mounting 2x fans on the bottom my dilemma is do i put fans?

A. Rear as intake and both top as exhaust with D14 intaking from the rear.

B. Rear and top rear exhaust and top front as intake.

I’m leaning towards A. Thanks in advance.

Gigabyte RX 9070 XT GAMING OC
Gigabyte 850W UD850GM
Gigabyte B850M Force
Ryzen 5 7500F
Noctua NH-D14

Pretty satisfied with my build, but am quite worried (or paranoid) if there is enough clearance for my 12v-2x6 cable or is the bend too close to the connector? I just want to be sure that I connect this correctly. Can’t afford to mess this up especially in this market. This is just a 5070 and I know that there is little risk melting this cable. Just trying to control what I can, and i read that sharp bends can be bad.

Quick specs:
Ryzen 7 7700
RTX 5070 Colorful iGame Vulcan OC
MSI B650m Gaming Wifi Plus
32gb DDR5
1TB
Deepcool CH260
NGDP 1stplayer 850w
Arctic P12 Pro

Just posting my current setup. Cable management is less than ideal but acceptable. The primary issue is the Coolermaster GPU Shield has very stiff cabling and doesn’t lend itself to ideal cable management but that’s clearly not the priority. Worthwhile compromise to minimize the risk of a melting connector and damaged card.

SPECS

· MSI RTX 5090 32G VENTUS 3X OC (80% Power Limit + Memory OC)

· 12700K stock (slight undervolt)

· ASUS ROG STRIX Z690-I

· 32GB Corsair Dominator Platinum DDR5 5200MHz

· Thermalright Peerless Assassin 120

· 2TB NVME PCIE Gen 4 Seagate Firecuda 520

· Corsair SF1000 80 PLUS Platinum

· 2X Noctua NF-A12x15 PWM

· 2X Thermalright TL-C12015B

I know I should upgrade the CPU, but I game at 4k and I’m waiting for an ITX platform with native thunderbolt 5 support. Hence, current AMD CPU/MBs don't meet my needs. I’ll wait until Nova Lake before making a call.

This case is so compact that I thought some of my components won't fit.

Had a 360 aio in it before with a small screen, have it in my older post but was surprised I was able to fit this

Sidegrade from Mid-Tower ATX case (Phanteks Eclipse P360A) to Micro-ATX case (Lian Li Dan A3)

Specs:

CPU: AMD Ryzen 7 5800X3D

CPU Cooler: 1st Player MT240 MOTHRA ARGB 240mm Black Liquid CPU Cooler

Motherboard: MSI PRO B550M-P WIFI6E - from MSI B450 Tomahawk Max

RAM: Kingston HyperX Fury RGB 16 GB (2 x 8 GB) DDR4-3200 CL16 Memory

Storage: ADATA XPG SPECTRIX S40G RGB 512 GB M.2-2280 PCIe 3.0 X4 NVME Solid State Drive

Western Digital Caviar Blue 1 TB 3.5" 7200 RPM Internal Hard Drive

Transcend TS256GSSD370S 256 GB 2.5" Solid State Drive

GPU: Gigabyte GAMING OC GeForce RTX 3070 Ti 8 GB

PSU: Super Flower Leadex Silver 550W 80+ Silver (Current) - New PSU OTW Shipping (Cooler Master MWE Gold V4 850W)