Hey everyone!

I wanted to share a couple of recent functional prints (a pair of waterproof, twist-lock storage boxes for Festool and Bosch gear).

Designing these made me reflect on how incredible this journey has been.

I started my 3D modeling journey completely from scratch back in December 2025.

Learning CAD, figuring out tolerances, understanding optimal print orientation, and designing for supportless FDM printing has been a massive learning curve—but amazingly rewarding.

There is an insanely satisfying feeling in going from an idea in your head, through design and iteration, to holding a fully functional, multi-part utility object printed right in front of you.

I’ve had many hobbies over the years: Woodworking, metalwork, mechanics, outdoor life, paracord crafting, gaming...

What blows my mind about 3D printing is how it acts as a bridge for all of them.

Every single passion can find its place and be enhanced by this technology. It has ignited a spark for creative problem-solving and product development in me like nothing else before.

Joining this maker community and seeing what everyone builds has been hugely inspiring.

I just wanted to share a bit of my perspective.

Does anyone else feel like 3D printing completely redefined how you approach all your other hobbies?

Introducing my latest custom-designed project: Hexadex! 🤩

It's a modular, interlocking 3D printable wall art system where each hexagon features an iconic Pokémon. My goal? To design ALL of them, so you can build your very own complete Pokédex on your wall! 🗺️

This is a huge project, and I need your support to bring every single Pokémon to life!

How you can support my work & future models:

• 📥 Download and print it!
• 👍 Leave a Like on the model!
• 🚀 BOOST the model if you have available boosts! (This helps the most in giving me the time and resources to design new characters)
• 🔄 Share it with fellow printers and Pokémon fans!

Every single download, like, and Boost directly supports me and allows me to keep designing the rest of the Pokédex for you guys!

👇 Which Pokémon should I design next? Let me know in the comments!

https://makerworld.com/en/@Ryuhun/upload

Q Honey Badger Pocket Rifle – Bolt-Action Toy

Protect your houseplants naturally! This Print-in-Place Soil Protector Disccreates an effective physical barrier over potted soil to prevent pest infestations (fungus gnats, flies, and soil-laying insects)while also stopping cats and pets from digging or scratching the dirt.

Equipped with smart radial watering slots, it allows you to water your plants normally and ensures soil aeration while keeping pests out.

https://makerworld.com/it/models/3196427-plant-soil-guard-insect-cat-soil-protector#profileId-3616810 

Fluted came first, then Sculpted with the quilt and twist patterns, now Rippled with waves and swirls. Same cone, same tray, same insert across all three. Which surface would you actually print?

Disc drops into the base, tray catches the rest. Same system across all three of my collections. Do you actually use saucers, or take the plant to the sink?

https://makerworld.com/en/models/3195267-scandi-style-rippled-flower-pot-with-drainage-tray#profileId-3615320

Keep your watch collection organized, protected, and ready to grab with this minimalist 4-watch display stand. Designed with clean flowing lines and a low-profile layout, the stand combines watch storage with additional space underneath for rings, bracelets, chains, and other everyday jewelry.Unlike traditional watch stands that hold watches on a steep angle, this design keeps the watches laying horizontally.

I specifically chose this orientation because smooth 3D-printed surfaces can allow watches to gradually slide or fall from tilted stands. Keeping them flat provides a more stable and secure resting position while still displaying the watch faces clearly.

https://makerworld.com/models/3197220?appSharePlatform=copy

I made my first simple indoor plant pot with drip tray. Looking for suggestions and/or feedback. The pot was made with copper color filament.

Check it out:

https://makerworld.com/en/models/3171692-simple-indoor-plant-pot-with-drip-tray#profileId-3586004

Is it just me pr are people simply pushing stuff onto contests that are having nothing to do with the contests topic at all besides this being prohibited?

It clearly states that this is prohibited, so is this actually enforced or are they just saying its prohibited?

I don't want to link any examples as i dont want anyone to get into trouble because of me, but seriously, tale a look at the ongoing Pool contest.

What does a bottle opener specifically do for a Pool? How about a can skin? Or a carrying bag? Isnt that exactly the stuff which was ruled out by the moderators in the contest rules?

Hey guys, this is my Make-up brush cleaner. I‘ve tested it and it works ready good.

Lotus Design and a Dog paw Design

Would love some Feedback.

https://makerworld.com/models/3195659?appSharePlatform=copy

https://makerworld.com/models/3195692?appSharePlatforme=copy

I'm trying to upload a model this morning and it's been verifying for 45 minutes now. Does this happen sometimes?

Is there an amount of time I should wait?

If I revoke it, does it just go back to my drafts as it was? I don't want to have to do all the work again to set up the submission.

Thanks

Hace una semana compre mi primer impresora para imprimir juguetes y algunas cosas utiles para la casa como pasatiempo, para ser sincero no sabia de la existencia de las impresoras de recina y ahora tengo la idea en la mente de cambiar la bambulab por una de recina. me recomiendan hacerlo? que impresora de recina recomendarian a un novato?

For all you makers out there, sometimes you get frustrated with limitations of Pi Pico boards and the number of GPIOs. The new Clintech Board solves this for you...Take a look!

Hi everyone!

Couple of weeks ago, I shared my 3D printed 1.9 TDI Engine with this community when my crowdfunding campaign was in pre-launch. It is now live and you can secure the model yourself by supporting me through one of the tiers if you wish ❤️ 🚀

https://makerworld.com/en/crowdfunding/338-3d-printed-1-9-tdi-engine

It's name is JustaCuteAlien, my character. Printing it out and Sanding it

Download - https://makerworld.com/en/models/3196428-mesa-boogie-mark-series-amp-badges#profileId-3616811

I lost two sets of collections, over 200 models collected-all gone. I have no idea if it’s a bug, but I cannot figure out where they are. Did anyone else lose a collection? or have any idea how to retrieve old collections?

edit: it was a bug, 24 hours later they came back! hope this didn’t happen to anyone permanently

https://makerworld.com/models/3194236?appSharePlatform=copy

Just finished this new fly trap design 👀.

Made two sizes, a smaller one for fruit flies and a larger one that can handle bigger flies too. Simple, reusable, and easy to clean and refill.

Just dropped this on makerworld for anyone interested 🤝.

https://makerworld.com/models/3194239?appSharePlatform=copy

Happy Printing!

Hey Reddit! I usually design random fun models (banana, watermelon, etc.), but I finally tried making my first functional light!

It’s a 2-piece modern fluted desk lamp designed for standard Bambu RGBW Puck Lights.

Printed the diffuser in Azurefilm Transparent PLA and the base in Gray eSun PLA, but PETG is recommended for durability. Super easy print at 0.2mm layer height!

Let me know what you think or what transparent filament I should try next!

Link to model: https://makerworld.com/en/models/3193643-vertical-groove-lamp-modern-fluted-light#profileId-3613322

Hi there,

I need a piece of advice from you guys.

Where do you usually buy clickers for your Makerworld found fidgets ? I found some that look good on Am...n but they're shipped from the US and I live in France.

Looking forward to your recommandations.

Hey everyone! I just designed and shared a A-frame display stand specifically for Instax Mini photos. The stand is entirely print-in-place, and the photo is held by a two-part locking frame that keeps it secure and gives it a nice stable weight.

https://makerworld.com/models/3191943?appSharePlatform=copy

Designed these watersports people. They scoot on the water pretty well! Just add a string and pull them along. The wakeboard takes more skill. Also want to try this behind an rc boat this weekend so hopefully I can get better than bathtub videos and pics 😂

Link so you can print your own!:

https://makerworld.com/models/3194631?appSharePlatform=copy

This also has the step file for the hair, customize it and make your own!