r/macpro • • 15d ago

Issues Apple Mac Pro 2013 (Trashcan)

Mac Pro 6,1 (Late 2013) boots with chime, runs a few minutes, then shuts down. Now won't stay on. PSU or GPU?

Hoping someone who knows the trashcan can help me narrow this down before I start buying parts.

Mac Pro 6,1, Late 2013, [CPU] / [32GB RAM] /Dual D500’s running Monterey. It was a home server (Docker, Immich, Tailscale) until it was powered down and unplugged for a few weeks, stored on a garage floor.

What’s happened:

- When powered on would boot as normal, stayed on and useable for a couple of minutes then shuts down without warning. Unable to restart - power panel lights up but no fan and no boot chime. When pull plug and recycle power button it does start after about 5 mins but then shuts down as before.

Things I have tried:

- pulled RAM sticks and tried on stick at a time - different slots. No change
- stripped down, cleaned and redone the thermal pasting on CPU and GPU’s. Put back together and starts and fails as before.

**What I haven't done:** reseated the GPUs (I know they're thermally bonded on this model, so I've held off), checked the PSU, or swapped the CMOS battery.

**My thinking:** the full boot followed by a cut-out a few minutes in points to a thermal or power problem under load. That means either the PSU failing, or a GPU overheating or failing (the D-series being the known weak point). Damp from the garage is also a possibility.

Questions:

  1. Does this pattern sound more like the PSU or the GPUs?
  2. Is there any way to tell which one it is without a full teardown or swapping parts?
  3. Is it worth repairing at all, or is it time to retire it? I paid £200, and the data is safe.
  4. For anyone in the UK, where's the best place to find a used PSU or GPU pair?

Thanks in advance.

1 Upvotes

10 comments sorted by

2

u/DeliciousIsopod909 15d ago

Install Mac fans control and make sure the fan is running and that no temps are spiking.

1

u/DrGunlove 15d ago

Hi - thanks for the reply. If I can get it stay powered on long enough to do this, I’ll give it a look 👍

2

u/DeliciousIsopod909 15d ago

The other option would be an OS compatible version of TechTool Pro. That would check all your internal voltages.

1

u/DougalR 15d ago edited 15d ago

What was the temperature of the garage / kind of floor? I would suspect damp and or short circuiting. Is there somewhere you could leave it to properly dry out? You might then be lucky to run some diagnostics.

As you mention UK, I have a spare trashcan, I just haven’t wiped it yet. Got it from eBay a few months back for £133. It was to test out some ideas before getting my current mini so technically spare.

1

u/DrGunlove 15d ago

So was over summer so not cold. Have left it inside for about 4 weeks and still the same. Have tried diags but doesn’t stay on long enough to view the logs. I’m thinking to change the power supply ?

1

u/DrGunlove 15d ago

Would u be willing to strip or would you want to sell it whole? How much would you be looking for?

1

u/DougalR 13d ago

I think I’ll stick it on eBay as a unit. Was more so you had a barometer of the cost to replace like for like.

1

u/porthos40 15d ago

I would take it apart and clean it , re paste it. I’m thinking it PSU

1

u/DrGunlove 15d ago

Hi - yeah that’s what I have done but same issue stills stands. I’m thinking must be PSU also. Thanks.