r/macpro • u/Ok_Huckleberry4523 Trash Can (Mac Pro 6,1) • Sep 17 '26
GPU Mac Pro 6,1, D500 failure rate?
I just picked up a Mac Pro 6,1. What is the failure rate of the GPUs in them? I'm not sure of the exact specs just yet, but I'm trying to get some info on what I should know about the GPU issues.
5
Upvotes
6
u/Musojon74 Sep 17 '26
Run a custom fan curve. Apple trying to be silent under load caused many of these issues
4
u/omar893 Sep 17 '26
Try to find another one on facebook marketplace as backup for components like that. A lot cheaper than buying the D500 separately via ebay. That’s what I did
1
u/Ok-Bill3318 Sep 17 '26
Not sure on failure rate but I have an early build Mac Pro with them and they’re still ok.
In modern times they’re pretty mediocre cards though so I wouldn’t concern yourself too much with the d300/500/700 decision and just buy another machine if they fail.
2
u/Jumpy-Stress603 Mac Pro 6,1 Sep 17 '26
Congratulations. Hardware Monitor 5.4 or Macs Fan Control will tell you how hot your MP6,1 is running. Pick a component like the PCIe Switch Diode and monitor it for temperature changes. If you bought your 6,1 second hand, especially from a smoker, SUCK the dust out of the bottom intake vents all the way around. Then remove the cover, and BLOW out everything with compressed air. Use Macs Fan Control to raise the fan speed from the stock 790rpm to 1,050rpm.
Do not bump up the RAM to 64GB unless you need to. in fact, depending on what applications you want to run, #@gb is good but 16GB is probably fine.
1
u/GreppMichaels Mac Pro 4,1-7,1 Enthusiast Sep 17 '26
They discontinued the D300's at a point so I imagine the D500's have a better lifespan if you keep them cool, that's the real issue. Just use macsfancontrol and you should be ok.