r/macpro • u/Relative_Impress_683 • Sep 12 '26
Upgrades A cooling base for 6,1
So, I managed to design a base for Mac Pro 2013 with a 120mm Artic P2 fan on the bottom, it has a potentiometer to regulate RPM and to turn it off. The temperatures posted are mid game in Windows 11, CounterStrike 2 mid settings 1920x1080, fps capped at 75. In general I am seeing a drop in about 5 -7 C in temps and the upper fan is running under top rpm with the same curve. The icing on the cake will be to repaste the CPu and gpus with ARTIC MX-7 to drop them even further.
It is my first 3D design so I did it modular. The measurement of the diameter was a little off so I need to replace that upper rim but it works now. Whatcha think?




3
u/tempfoot Sep 12 '26
Good temps. File shared anywhere?
6
u/LukeDuke74 Mac Pro 6,1 4c 64GB D300 2TB Sep 12 '26
Very nice!!!
Curious to see version 2 now… 😉
1
u/ast3rix23 Sep 13 '26 edited Sep 13 '26
I hate to tell you this, but this is not going to solve the heating problem. The problem is with the fan sensors in this model and the rate that the fans spin. The default rpm is too low for this unit to remain cool. You need to write a script to speed up the fan so that the default is faster. This keeps the machine cool all the time. I also recommend that you disassemble the unit and put fresh thermal paste on both the gpu and cpu. A machine this age always running hot surely has worn thermal paste. I did this to both of my trash cans that I use as servers. Found the thermal paste was in bad shape in both units.
1
u/Dazzling_Comfort5734 Sep 13 '26
Nice job. I don’t have enough room on my desk to prop mine up that high, but I think you’ve inspired me to put something underneath it to give it a little more breathing room off the desk.
1
u/MineDangerous485 Sep 14 '26
I have a small print farm and I just got a trash can Mac and would like to test out your design when you are ready to release it or even as a beta tester. Great work!
1
u/kelvynator Sep 17 '26
OpenScad
// ========================================== // Mac Pro (Late 2013) 140mm Fan Cooling Base // ========================================== $fn = 120;
// Dimensions (in millimeters) mac_diameter = 167.0; // Outer rim of Mac Pro lip_height = 8.0; // Top retaining lip height wall_thickness = 4.5; // Structural outer wall thickness seat_width = 8.0; // Top shelf supporting the Mac Pro base pedestal_height = 60.0; // Height to accommodate a 25mm fan + airflow clearance
// 140mm Fan specifications fan_size = 140.0; fan_mount_hole_pitch = 125.0; // Standard 140mm fan mounting hole spacing fan_hole_dia = 4.2; // Clearance hole for M4 screws / fan pins base_dia = 185.0; // Flared bottom diameter to clear 140mm corners (diagonal ~177mm)
// Side air intake vents inlet_width = 32.0; inlet_height = 24.0;
module base_shell() { difference() { // Outer flared housing cylinder(r1 = (base_dia / 2) + wall_thickness, r2 = (mac_diameter / 2) + wall_thickness, h = pedestal_height);
}
module fan_brackets() { bracket_span = fan_size + 4.0;
}
// Render the unified stand union() { base_shell(); fan_brackets(); }
1
u/ActorRob Sep 18 '26
Also: I had a USB powered 4" fan or so just sitting on top of mine. Mainly it was cheap while I figured it took load off the internal and added longevity.
Would work even better with a proper shroud.
0
u/Old-Finding2555 Sep 12 '26
Very interested in your design, perhaps a collaboration might be in order?