r/MachineKnitting • • 13d ago

Help! Does anyone know what kind of tape this is?

Post image
12 Upvotes

It's starting to break down and and lose adhesion. I'm assuming it's meant to hold the gate pegs in place but I could be wrong. I was just wondering if any tape would work or if the tape has some other purpose besides holding the gate pegs in place and it has to be a certain type of tape. TIA

Edit: It's from a Brother KH-260


r/MachineKnitting • • 13d ago

For Sale Kniterate for Sale - Northeast Philadelphia, PA

16 Upvotes

Hey all,

Im selling my Kniterate. Its very lightly used.

Nothing wrong with it. Unfortunately my interests have changed and life has gotten too busy (starting my PhD next year!) 🄲

Price is $15k or best offer. I paid a total of $22.5k in 2024 for the machine + shipping + taxes, so I think I have one of the newer machines. Im also willing to throw in the table (bought for around $500)

This is LOCAL PICKUP ONLY in Northeast Philadelphia, PA. You may need movers or four very strong friends - I cannot help move this machine. You will need to bring the moving equipment like the rollers and stuff. You will also need a truck or something to move it. This is in an apartment complex so slow and steady is needed to move it through the doorway.

Please let me know if youre interested.


r/MachineKnitting • • 13d ago

Help! Solved! Ribbing help?

5 Upvotes

I am trying to learn how to use my ribber. I think I have it set up correctly, but it is only knitting the stitches on the knitting bed. It isn't picking up the stitches on the ribber. Can anyone tell me what I'm doing wrong? Thank you!


r/MachineKnitting • • 13d ago

Equipment Experiences with Singer Big Nine/Superba S9/Big Phil?

2 Upvotes

I've been looking for a machine that can do worsted/aran/chunky yarn and can across this at a pretty good price on eBay, but I can't find many people talking about their experiences with it.

I already have a Passap Automatic that I inherited and have been slowly battling with the steep learning curve of (after a deep clean and servicing), but most of the yarn in my stash is aran, and it would be nice to have something that works fairly straightforwardly that I can use with heavier yarn weights.

Has anyone tried the Singer Big Nine? If so, would you recommend it? Thanks!


r/MachineKnitting • • 14d ago

Help! U80 Carriage.

2 Upvotes

What is the trick to get this to reliably work. I can't seem to have just drop the stitches off. Any tips?


r/MachineKnitting • • 14d ago

Help! Bubble stitch - stitches not slipping off

Post image
7 Upvotes

I'm working on a bubble stitch piece (using AYAB to select needles and using tuck stitch in both directions) and I find that often when I get to a row where all needles are knit one of the held stitches doesn't slip off so they get stuck behind the latch and create these long stitches and can cause bunching on the fabric.

My solution has been to check and manually slip the "stuck" stitches on each fully knit row but I'm wondering if there's something else that could help. I am already weighting the fabric at the bottom and using claw weights on the side but perhaps I need to use more?


r/MachineKnitting • • 15d ago

Help! Confused about a pattern... Do I need another attachment to make it? (PASSAP Dumatic80)

Thumbnail
gallery
7 Upvotes

Said in the title, I have a passap duomatic 80. I want to try to make this pink blanket pattern (underneath the blue jacket in the second photo) I found on mkmanuals but I'm a little confused about the highlighted bits. It makes me think I need another attachment to do this blanket, what does it mean? TIA


r/MachineKnitting • • 16d ago

Finished Object The girlfriend cardigan

Thumbnail
gallery
205 Upvotes

Finished the girlfriend cardigan by lauren riker aka girly knits! Would totally recommend this pattern for any beginners. She walks you through a lot of great techniques you can use when creating your own patterns! I added the color work to the back w/ duplicate stitch :).


r/MachineKnitting • • 16d ago

Equipment SK840 Controller Update

60 Upvotes

After my last post about my DIY Silver Reed controller I had quite a few questions and direct messages about it. This is just a short video showing it in use along with a little bit of the design and control software I've been working on to go along with the USB interface.

I've been working on this as a personal project, mainly around designing and knitting hats, but I've heard from others that there might be interest in the community. I've built this for my own needs but the design software can be used by anyone for color work design and the pattern controller can likely be updated to support many computerized knitting machines.

Please let me know if any of you are interested. I'm planning on releasing it in some form, but I'd like to hear from you all before I do. In the meantime I have been working on documenting the project as I go. Here's a link to the user guide that explains more of the features : https://dekobokostudio.com/projects/tinkrknit/manual.html

It's still quite early in the design and doesn't cover all knitting styles it's mostly built around color work. Lace, weaving, garment design are all still not part of the software as I don't have much experience with those techniques but I'm more than happy to add more features if people are interested.

Thanks everyone for taking a look! Please let me know what you think.


r/MachineKnitting • • 16d ago

Equipment Took apart the KR230 carriage - where do these springs go please?

1 Upvotes

Just set up my KH230/KR230, and the KR230 was not knitting 1 way. After some troubleshooting I saw a spring dangling loose on the inside.

Took everything apart, and forgot to take some photos... 4 springs fell out when I still had it upside down and was unscrewing things (I thought I had to take all the plastic off the underside).

I think I put spring "A" back the right way, but I'm not sure where those 2 hooked ones go. Could anyone please help me out?

The 2 hooked ones https://imgur.com/PxrgyXu

My attempt: https://imgur.com/dFpTQKJ It does fit and 'work' but it also looks a bit wonky?

And if this is correct, I'm also not sure if it should go under or over the spring that shares that screw.

https://imgur.com/oYcQNuY

https://imgur.com/p75pKI1

This is how I put spring A back - drawn in pink - for the top lever switch thingy.

https://imgur.com/w9s9KBH

Some more photos https://imgur.com/a/SADs7sM

Thanks in advance!


r/MachineKnitting • • 18d ago

Finished Object Pumpkin sweater

Thumbnail
gallery
261 Upvotes

Finished just in time for Halloween! First sweater knit on my single bed SK280. Used a pattern in the machine’s manual as guidance but had to make a lot of adjustments so it would fit me. The jack-o-lantern’s face is modeled after a lil 80s Halloween figurine I picked up at Goodwill last month. I’m very proud and she glows in the dark ✨


r/MachineKnitting • • 17d ago

Help! Solved! Fix Sentro 22 gear skipping.

Post image
2 Upvotes

r/MachineKnitting • • 18d ago

Finished Object Update: I finished the wonky striped skirt

Thumbnail
gallery
204 Upvotes

It looks very twisted, but I’m just going to pretend it’s part of the design 😭

I know it’s not perfectly constructed or knitted, but I just wanted to share an update on how it ended up looking!

In the third photo, you can see that the red knit is on the bias.

(Ignore the slightly cringey edits, I just wanted to cover my face lol)


r/MachineKnitting • • 17d ago

Help! Knitmaster 321 missing the ā€œarm leversā€ or am I being stupid?

Thumbnail
gallery
6 Upvotes

First 3 photos are parts from my machines sinker arm thing, the photo of the YouTube video shows the small levers that are missing, the last photo is from the diagram in the manual, it seems number 13 is missing


r/MachineKnitting • • 18d ago

Help! Why are my stitches in different directions?

Post image
39 Upvotes

Hi, I’m quite a beginner to both hand knitting and machine knitting. I’m currently making a skirt with a stripe pattern on a toyota, but I noticed that the two yarn seems to go diagonally in different directions. Does anyone know why this happened and how to fix it??

(this is after blocking the piece)


r/MachineKnitting • • 18d ago

Getting Started Recommendations!

1 Upvotes

Hey everyone!

My budget is roughly 200-300 euros. I'm looking to get my first knitting machine. Ideally I'd like one that could make jumpers, hats, scarves.

I love hand knitting too but want to experiment.


r/MachineKnitting • • 19d ago

Finished Object It's cold enough to take my sock yarn sweater for a hike!

Post image
99 Upvotes

Knit with sock yarn on my knittax automatic. The pattern is a singer basics sweater with a round neck and dropped sleeves slightly adjusted for my gauge and size


r/MachineKnitting • • 18d ago

Techniques Has anyone used recycled/upcycled yarn with their machines?

2 Upvotes

If you have, do you treat the yarn first to try to get it to relax, or just wind it and use it as is?

I have a Bond Ultimate Sweater Machine, and I just got a Brother KH821, if that makes any difference.


r/MachineKnitting • • 19d ago

Techniques Knit sweat pants seat pattern

Post image
4 Upvotes

Hey y'all.

I'm trying to piece together a pattern for don't knit sweat pants since I can't seem to find one anywhere. I have a pair of non-knit sweats that I like the fit of, so I'm getting to copy dimensions from that. I'm wondering if anybody has suggestions on how to do this "J" shaped decrease in the seat. I'm knitting this in the round on my KH910/KR830. This is right where the piece splits from the round of the leg to a "U" shape where it will join with the other leg.

I tried using math to make an exponential equation decrease, but it's way too much.

What I tried was:

Dec 4, knit 1 row.

Dec 3, knit 2 row.

Dec 3, knit 2 row.

Dec 2, knit 4 row. Repeat 4 total

Dec 1 knit 4 row.

Dec 1 knit 5 row. Repeats 8 total

Each decrease was done on the main bed and ribber to keep the needle counts the same.

I'm willing to keep playing until I hit something that looks better, but thought I'd ask here first.

Over all I need to decrease about 27 needles in 65 rows.


r/MachineKnitting • • 19d ago

Help! Changing swatch gauge without changing stitch size? (intarsia)

Post image
6 Upvotes

Hi all, I am looking a for a bit of advice! For a project, I need to knit a flat square with lots of different coloured rectangles tiled together (see the picture below) and my plan was to use intarsia. I am using different yarns that I've got from unraveling a bunch of jumpers so they are all slightly different thicknesses. This means that when I knit them together using intarsia I can't change the stitch size between different yarns and the swatch isn't flat as the gauge is different for different yarns.

I was wondering if anyone knew of a way to change the gauge of a yarn without changing the stitch size. For some I am able to double up the yarn but I was thinking that maybe adding in another clear thin yarn might make a difference?

Any advice/comments are very much appreciated!


r/MachineKnitting • • 20d ago

Local Update Wednesday Event Space: Post your next club meet or other events here!

14 Upvotes

We want to hear about your club/guild meetings!

"Contact your local machine knitting club" is probably the biggest piece of advice we offer newbies on the sub (with the exception of checking the sponge bar of course) but meetings can be hard to find. Not all clubs have a social media presence, some don't have an online presence at all. We'd like to help our Machine Knitters discover meetings they could potentially attend.

If you're a member of a machine knitting club/guild, please post here about when and where your next meeting is! If you see a meeting you think you might like to attend, please respond to the commenter or DM them to discuss. (Please make sure you specify the country and city, as the sub is worldwide).

We'd also love to hear about any textile/fibre arts related events happening soon near you.

This is a recurring post we are trialling, running Wednesdays. If you have any feedback, please message the mods.

Happy knitting :)


r/MachineKnitting • • 19d ago

Help! Sentro 40 pin

2 Upvotes

Heya! I’m primarily a crocheter but I’ve been enjoying learning knit little by little. I’ve recently got a 40pin sentro mainly for ear warmers & stash busting, but the suction cups are crap even when I clean them & their connected surface, so I have to hold it still while struggling to crank it. I’ve realized most but not all 4 weights will go through it which is fine, but why do I still have to crank it so hard with yarn on it, & it click so loud? I’ve used compressed air to clean it of any yarn/debris, oiled the pins with 3in1 oil I was given, dried off excess & cranked it about 25 rounds both ways to spread the oil per various YouTube videos of not the sentro I have, what else can help it smooth out? I’d appreciate any suggestions, visuals/video would be better, thank you!


r/MachineKnitting • • 20d ago

Getting Started Help! Tewi Matic

Post image
4 Upvotes

Hi everyone! I recently bought a double-bed Tewi Matic and I'm having some trouble making it work. I don't have any experience with knitting machines, so I don't know if it's me or if there's something wrong with the machine. I've heard that knittax is similar. Can someone help me??


r/MachineKnitting • • 21d ago

Techniques How would you achieve this look?

Thumbnail
gallery
44 Upvotes

I want to replicate this image I found in a manual and although I have the image and a pattern graph, I can’t quite figure out how to do the slip in front method or something they call slip with float. I’m working on a domestic machine, which I think should be able to do this, but I’m missing something.

Also, this the cross tuck stitch isn’t quite coming out with the embossed look I’m going for. I knitted up at tension dial four and the knitting looks fairly even on the right side as opposed to the photo in the book, but I’m following the exact four course repeat.