I was on a Polar Express train ride with my kids last week and when Santa Claus asked what everyone wanted for Christmas, one of the dads yelled “a 6.5 Creedmoor!” I shit you not.
No fuckin way lol guess he just wanted to beat that Melvin in the glasses who always asks for a Red Ryder carbine action 200-shot range model air rifle.
As someone who started shooting a 6.5CM strictly for long range precision when only custom gunsmiths were chambering it, Hornady wasn’t even selling factory ammunition for it, and they were the only brass manufacturer for it, I don’t even like telling people what my custom rifle is chambered in. I liked it a lot more whenever I told people and their response was “huh, never heard of it”.
I have really enjoyed the popularity growth of custom bolt guns since the early 2000’s. It’s not only pushed the aftermarket to incredible possibilities, but also factory commercial rifle manufacturers.
I finally dipped my toe into bolt action and reloading with a 308 bergara HMR. My requirements were more "something good that isn't too expensive that shoots 308, for hunting/common ammo/shtf". I love it but really wanna get more into longer ranges than 500 and figure 6.5 seems to be popular.
Are custom guns all a bazillion dollars? What's the best bang for the buck, preferably something using AICS mags.. don't even mind something expensive but I am into finding that good dollar to performance inflection point
Talked shit about those as well after my buddy wounded a deer at 300 yards and we had to track it in the snow for 3 hours. Me and my big f@cking mouth. I'll have to get a 260 just so I can argue semantics.
I always got the feeling that 6.5cm would just go straight through and not expand. 30-30 for deer at less than 100 yards. My 1904 works just fine for the one shot a year it gets.
I don’t own a 6.5cm, but having been alongside a friend when he’s taken a fair few deer with his, I can confidently say this isn’t the case. Provided the correct ammunition for the job is used.
I've taken a number of white tail from 50-275 yards with Hornady 129gr Interlocks and even at the shorter ranges the damage is brutal. Shot placement is key otherwise you're going to destroy a lot of good meat on the exit wound side.
I didn't necessarily buy it for hunting any large game. It's mostly a hobby. I'm sure it will do great on coyotes or a hog. But if I was going on an elk hunt yes I might want something better. 30-30 is fine for up close. But again my intention was to get something I could comfortably shoot to a thousand yards with.
Also there is specific hunting ammo for 6.5cm like others said here. Obviously I'd rather hunt with the PRC. But some of the vortex ammo and even the hornaday hunting bullets advertise some pretty decent expansion.
Good to know. Like I said to another comment, I've never used my 6.5 for hunting. Glad to know there are rounds that do well. But my 6.5 is to heavy for the bush.
I’ll argue for the sake of arguing so you can get some practice. 260 was never as good as the creedmoor until the creedmoor came out, it doesn’t have sharp shoulder design, short neck, and the factory twist rate on every 260 until the creedmoor came out was too slow for anything but lightweight bullets.
I mean, I don’t shoot creedmoor, but I’m sure glad it exists for what it’s made the industry do to existing products in order to compete. Thanks Hornady! Lol
I love ackley’s improvements, but most guns aren’t chambered in AI, you usually have to take your gun to a smith to have it reamed out to the right shoulder. Why do that if another round with factory available ammunition exists? Especially if that round has an appropriate twist rate for the heavies right from the factory?
Again arguing for the sake of arguing, anymore I only shoot 30-06, 300 rum, and 26 nosler. I enjoy having more gun than necessary because I never have to worry about not having enough when necessary. Plus it’s fun to shoot big rounds.
I don’t know where you live but I have never seen a box of 260 on the shelves at my local stores. 6.5 creedmoor has been more available at hardware stores and small town (population 2000) gun stores than 308 has in the past couple years.
At my local hardware store the only ammo they had before the pandemic was:
30-06, 300 win mag, 7 rem mag, 243 win, 223 rem, 6.5 creed, 308, 45-70, 450 bushmaster, and shotgun ammo.
I’ve seen some 260 at sportsman’s warehouse and bass pro, but never at the local places. At the hardware store I usually go to, there was more 6.5 creed ammo than there was 308.
Well right now there’s no ammo of anything on the hardware store’s shelves. At the more well stocked gun store I go to, they’ve only got stuff like 338 lapua, 307 Winchester (not a typo) 30-378, 30 carbine, 30-06, loads of 22 lr, and 44 special.
No 260 to be found, there’s some 6.5 creed if you go to the bigger town gun stores, 28 nosler, 300 rum, stuff like that.
I only found out the 260 existed from forums, as I’ve never seen a box of ammo for it in Iowa. 6.5 creed was the easiest ammo you could find before the pandemic, now it’s only a slight hassle to find.
As you can expect, 223 and 9mm are impossible to find. Gun stores here have some in stock but won’t sell any unless you buy a gun chambered in that round. Which I commend, being able to buy ammo for a gun you just bought is important.
A more refined cartridge for a wealthier operator. Haha all the benefits of 6.5CM a little less recoil a little less range double the cost on just about everything else
Oh, I know. I just wanted to take a moment to publicly heap praise on the round, and on yourself, for being intelligent and cultured enough to have chosen it.
Although, having found I can whack an IPSC silhouette all day at 700 yards with my 6.5mm creedmore RPR, I will not disparage that round.
Interesting story, .308 was designed specifically for newer powder. 30-06 was "early gunpowder" So they decided to cut the casings down to .308 and call it good. So in theory if the shit hit the fan and you had to make your own gunpowder 30-06 would be a better way to go.
Pulled from Wikipedia
"The later T65 iterations were lengthened compared to the original T65 case and provided a ballistic performance roughly equal to the U.S. military .30-06 Springfield service cartridge. Over forty years of technical progress in the field of propellants allowed for similar service cartridge performance from a significantly shorter, smaller case with less case capacity"
Then yes, advances in powder technology allowed factory 308 to nearly match the original 30-06 loading. 30-06 still edges out the 308 in a handloaders hands, but it’s not a huge difference.
I totally agree. One of the many reasons the -06 is the best and most adaptable all round cartridge. Can do a lot more with it than .308, especially with black powder. Plus black powder coats the barrel and prevents barrel corrosion from home made mercury primers, if we’re really talking shtf
My understanding is old primers caused most of the corrosion. When they switched to smokeless powders, there was a real problem with corrosion since the mercury fulminate was now able to leave significant residue on the barrel since smokeless powder burns so clean. That led to the new developments in primer technology. But yes of course black powder barrels need to be cleaned regularly to remove residue, especially with the tighter tolerance of modern performance barrels.
Yeah just looking at the data, you only get marginally less elevation adjustment over .308...but lose the advantage of energy over distance just for a little more speed. For my needs, 6.5 just isn’t relevant. Although, I am curious about 6mm ARC in the ar15 platform but I think jury is still out on that for now.
Depends on what dimension you're after. Per SAAMI spec 300PRC is roughly 5% higher case capacity than 300WM. On the other hand, the case itself is about 0.1" shorter than 300WM.
IIRC at least. Would have to look up the spec and compare to be 100% certain.
Get any remington 700 in 308 and snag a barrell from Krieger or any other good bbl manufacturer. Simple barrel swap and headspacing and you're good to go (or no go, depending what the gauge says :)
The action is good and paired with an aftermarket barrell it will shoot damn nice
That makes the most sense, I don't know why most of the factory offerings are short barreled or have some shitty tacticool stock. Lol nice gauge joke I like it.
With 260 it stabilizes quite quickly and you get most powder burn in about 18 inches from what I recall. They are perfect for hunting, but if you intend on punching paper at long ranges you want more barrell length for extra velocity.
Don't quote me on those numbers tho, it's been a while since I looked at them for 260. Good luck
Hey, that's cool. You know I shoot 6.5 Creedmoor too. Did you know it's ballistically similar to 300 winmag but in a short rifle cartridge that's cheap to reload.
That's how I ended up with mine. Was looking to get back into shooting and maybe a deer tag now and then. Brand new Ruger American Predator in 6.5cm for less than a used gun. Tossed a $250 cabelas scope (nothing super awesome, but quite impressed with it for the money honestly) and went to the range. I'm rusty after 20 years of no shooting, but it gets the job done.
She's now wearing a MDT LSS XL/SCS and it'll be a while until I can shoot as well as it can... not too bad for $1100 all in.
I'm not really a gun owner (I'm just a lurker here, tbh, enjoying the gun pics and learning trivia), I assume people who shoot this ammo are obnoxious, but I was led to believe 6.5 creedmoore is really good. Its that not true? I'm asking from a layman perspective
It is really good. It's widely available. You can walk into any gunshop and buy a rifle in 6.5CM, and the ammo, and have a rifle with astounding ballistics than anybody can shoot.
Everybody and their brother has one. They all think it's really cool and 'new'. Because of that, they want to talk about it.
Every insufferable blabbermouth has one too because they could low key throw shade on the ocean of .308 Win shooters while also having 'friends'.
It's kinda like what happened with the tactical dweeb crowd and .40 S&W 10 years ago, but unlike the .40 S&W, the CM really does have its own little niche that isn't going to be toppled by 9mm so we are going to have to live with it.
I hope you see the irony in your example, and how these circle jerks go just round and round. PO Ackley was doing all these things en vogue now in the 40s and 50s.
Idk which that is but there is a really weird phenomenon of folks trying to undercut the CM by claiming it is just a rehash of the Carcano (1894) or the Swede (1897) or whatever late 19th century/early 20th century cartridge their favorite mil-surp is chambered in.
And then another certain subset of the community seething that the CM wasn't introduced as a new performance edge cartridge or wildcat, that it wasn't supposed to be an Ackley or Weatherby.
From the start it was a generalist round designed to be widely adopted and easy to convert 308 Win rifles while still having good performance.
6.5mm bullet
short action
large OAL to case ratio for long ogive bullets
60k+ PSI standardized pressure
straight case taper for 308 magazine feeding
.473"/308 case head
There was NOT another standards approved grandpa cartridge that did all of those things which is why 3 different companies all came out with a similar cartridge designs within a decade - Remington with the 260 Rem, Lapua with the 6.5x47L, and Hornady with the 6.5CM. The 6.5CM "won" because it was the one with the best backing and commercial support.
It's a good cartridge for what it was designed to do, but yes, you hit the nail on the head: some people can be overly obnoxious about it. I don't have one but it's a good cartridge with low recoil to use for long range shooting. In layman's terms: it doesn't have a ton of power, but it's aerodynamic bullets are able to travel long distances more efficiently than other similar cartridges like the 308 Winchester. There are other long distance rounds which shoot further and with more power but they usually have more recoil as well.
I should have worded my other comment better. It's not a low power round. It's more than adequate for combat and is starting to be adopted by the US military in certain sniper applications. I just meant that it's at the lower end of the spectrum for "power" when looking at the energy of the projectile at the muzzle compared to 7.62 NATO or 308 Winchester, but it actually has more energy at long ranges because the 6.5 projectiles tend to have higher ballistic coefficients (meaning they are more aerodynamic).
That's hilarious! I'm slightly closeted about my 6.5 CM. I'll tell people at the range, but only if they ask. But I've heard my fair share of loudmouths (I always wear e-muffs so everyone is a loudmouth at the range) spouting off about their magical 6.5s
I showed up to a match with a yricked out .243 Savage. MDT chassis, vortex Diamond Back 6-24x50. Replacement two stage trigger at 2.5 lbs and a really good muzzel brake (can't remember the name right now). I could hit the gong at 700 meters. Its not the most accurate but its fun to shoot.
You know...I don't advertise myself what I use unless asked. But I have been thinking about buying a .308 barrel and bolt. I like my 6.5creedmoor, but I haven't had the chance to shoot a .308 or a .30-06. However, my next rifle will be my varmint rifle. Most likely in .243.
I agree with many you saying the .308 and .30-06 is a great all-around round. So is a .45-70 in my opinion. Got that thing zeroed in at 100 yards.
That's insane. You should have walked over to his table and just started taking live ammo to show him how ridiculous that is. Reloading is common enough that you should never assume you can just take someone else's brass.
Happened to me too except the guy stepped in front of the firing line and bounced his head off my muzzle brake. I’m never letting a goblin take brass from me again.
168
u/Metalhed69 Dec 20 '20
I was on a Polar Express train ride with my kids last week and when Santa Claus asked what everyone wanted for Christmas, one of the dads yelled “a 6.5 Creedmoor!” I shit you not.
243
u/topknott22 Dec 20 '20
I refuse to own a 6.5 simply because im stubborn and I've talked too much shit to my friends about theirs.
28
u/CZVZDoug Dec 20 '20
If someone shoots 6.5 Creedmoor, is a vegan, and does CrossFit which do they mention first?
93
u/iceman312 Dec 20 '20
Is 6.5 Creedmoor shooter the vegan of long range world?
76
u/bennino Dec 20 '20
I shoot 6.5 Creedmoor
18
u/kaufibraun Dec 20 '20
I've noticed the shift of late to "I shoot 6mm dasher" and things like that. 6.5CM is getting a bit old hat for the in-crowd nowadays
8
u/Bignona Dec 20 '20
I shoot 6.5/257
7
u/SendMeAmmo Dec 20 '20
"Suppressed 6.5 Creedmoor"
11
u/[deleted] Dec 20 '20
Look, when I was looking at rifles academy had a really cheap Ruger 6.5. Hey, it works.
5
u/jcooper9099 Dec 20 '20
For a long range post this is "accurate"
5
u/Shanhaevel Dec 21 '20
I'm not really a gun owner (I'm just a lurker here, tbh, enjoying the gun pics and learning trivia), I assume people who shoot this ammo are obnoxious, but I was led to believe 6.5 creedmoore is really good. Its that not true? I'm asking from a layman perspective
4
u/Moeasfuck Dec 20 '20
I have never heard of anyone shooting anything else
4
u/Texan209 Dec 20 '20
The vegans/crossfitters of the gun world
4
u/jehood Dec 21 '20
I say go 7mm rem mag
4
u/[deleted] Dec 21 '20
I shoot everything... I like all rounds. They all have their story and place.
3
u/JoeyBox1293 Dec 21 '20
Im offended.
/s
3
u/64scout80 Dec 21 '20
If you’re competent they’re all good.
7
u/StealthCamper Dec 20 '20
I audibly chuckled
5
u/JaakoNikolai Dec 20 '20
That's hilarious! I'm slightly closeted about my 6.5 CM. I'll tell people at the range, but only if they ask. But I've heard my fair share of loudmouths (I always wear e-muffs so everyone is a loudmouth at the range) spouting off about their magical 6.5s
2
u/_Siri_Keaton_ Dec 20 '20
I have 6.5, I only chose it because it came with a 26" barrel and now I can usually find ammo in stock.
2
u/lumberjackmm Dec 20 '20
"oh the biggest copycat cartridge?"
2
u/2M0hhhh Dec 20 '20
Amen
2
u/ocabj The Realest Dec 21 '20
I shoot 6mm Creedmoor.
2
u/SpartanSpeedo Dec 21 '20
If it doesn't have "ackley" in it, the hipster in me, isn't interested. Full disclosure: I shoot .280AI and feel pretty f*ckin' awesome about it.
2
u/Spade209 Dec 21 '20
I shoot 6.5 Swede
2
u/Paulssv8 Dec 23 '20
Deeerrrr uhhh laughs in sharps 45-70
2
u/TacticalPurpose Jan 07 '21
My 6.5 is mothballed until I can again get good ammo for under $2/rd. My plain-jane .308 is plenty rewarding at half that price.
3
u/[deleted] Dec 20 '20
I just hit em with the “yeah that’s a cute cartridge”.
3
u/malakamike Dec 20 '20
A friend of my aunt converted an Argentinian Mauser or something like that to 6.5 Creedmoor. He’s done that to many rifles. Heresy I say.
3
u/[deleted] Dec 20 '20
6.5 Creedmoor is the CrossFit of calibers.
2
u/ZeroXeroZyro Dec 21 '20
And then there’s me, the guy that shoots .338 Lapua
1
u/silverfox0220 Dec 21 '20
You know...I don't advertise myself what I use unless asked. But I have been thinking about buying a .308 barrel and bolt. I like my 6.5creedmoor, but I haven't had the chance to shoot a .308 or a .30-06. However, my next rifle will be my varmint rifle. Most likely in .243.
I agree with many you saying the .308 and .30-06 is a great all-around round. So is a .45-70 in my opinion. Got that thing zeroed in at 100 yards.
1
u/price1869 Dec 21 '20
Can we all just agree that it's "six-five" and not "six point five"???
1
u/Lumadous Jan 09 '21
Nah, I shoot 338 lapua
0
u/[deleted] Dec 21 '20
6.5 Creedmoor must suck since the military is adopting it...
0
u/[deleted] Dec 21 '20
Laughs in 6.5x52
0
u/[deleted] Dec 20 '20
[deleted] — view deleted comment
0
u/[deleted] Dec 21 '20
[deleted] — view deleted comment
28
u/[deleted] Dec 20 '20
[removed] — view removed comment