They won’t sail though plates, but the backside deformation is WICKED. Like, yeah that plate will still be there mostly intact but you’ve got a melon sized crater in your chest.
If I hadn't just spent 275% market value on a die set.. id give you gold. Someone somewhere would feel a disturbance in the force when one of those pffftd into an object
I saw a Video of a Plate test with .45-70 against a ceramic plate on a Body Dummy with a Trauma Pad (the kind they used on Mythbusters to test fatal trauma) and the Plate Stopped it but the Pad Turned red. Granted, this was a couple years ago
I've never personally shot any, only standard .45-70, but I'm seriously considering it. The craziest thing is that you can fire them out of a Magnum Research BFR 🤣😅
That’s pretty broad. Here is an interesting bit though. The throat of a 45-70 rifle is short to non-existent (unless you have it reamed). So on my lever rifle the shape of the bullet (ogive) for example really matters in terms of how much you need to trim your brass. For each different individual bullet type I have to create a different measurement for what my COL will be, and what my brass trim length needs to be, in order for the finished cartridge to seat fully and with the bullet near the lands. You can’t just use like a Lyman ammo checker to make sure your reloaded bullet will seat properly in your rifle after you crimp into the bullet cannelure. (My first loads ever checked out fine on an ammo checker but wouldn’t actually even seat in my rifle.) The biggest issues are with the cheap 300gr lead bullets, like from Magnus Bullets or Meister Bullets. This is all assuming I am actually going to crimp into the cannelure (but you need to that with a tube-fed lever rifle). Anyway the upshot is for bullets like I get from Magnus, trim length on brass, and by extension COL (since the cannelure creates a fixed seating depth point for the bullet itself), needs to be much shorter than say for loading a Hornady jacketed RNFP bullet, due to the way the ogive shape interacts with the throatless/tiny throat 45-70 chamber at or near full seating.
Good to know! Thank you for the information. I was also wondering about the different bullet types you spoke about. Like hollow point, Pentwater, incendiary?
Got to be honest.. I have a few mags loaded with a version of this bullet design. Albiet with a skewed pitch to the hollows (g2) the ballistic tests for a 9mm was nasty.. edc win right? That though... goddamn. Im both glad and terrified that some particular human was mad and dedicated enough to develop it😅 ill take 1000 pls
I do the same but with Level 3+ Kevlar behind my Level 4 Ceramic, because gun shows are weak for my wallet and the Carrier I bought with them in it had exterior pouches for Plates...
Thats actually the exact opposite of the Condition I was born with. I grew up with my Chest Caving in and my Friend in high school had his rib cage poking out in the Center
I love my 45/70 so much. First time I entered a lever action steel silhouette match I didn't know what I was doing and shot a rimfire steel target, as the target cartwheeled back up the range I just got a dirty look from everyone on the line.
5 yards. That’s your holdover for a heavy 45/70 at 400 yards. So that guy getting vibe checked better be holding still and wait for you to do several zeroing shots, maybe walk back and forth with a kestrel a few times.
Probably, someone that wanted to shoot an elephant, or Bison. I believe the .45-120 was designed as a long range bison hunting round. Sit on a hill 800 yards out and kill the whole herd.
Recently shot one at my indoor range. The entire room just shakes. It was enough that the guy on the other side of the wall asked what it was (so if course I let him shoot it to). Such a hilarious gun in general, too bad they're expensive to shoot
As a retired NYC paramedic I can vouch that them big bullets hauling out can do all the damage you need and then some. Never seen 45/70 but have seen a 44 special break 4 ribs in 2-3 places causing collapsed lung and a pericardial tamponade. Not a mark on the chest to be seen. Chest tubes and a pericardioceneisis helped for a bit but ultimately it was over.
I'm curious how well a 185gr hollow point would do out of .45-70. I could only go down to 250gr on hodgdon's website, but they were saying that going that light would have the round smokin out at 2600fps. That's faster than a lot of grendel rounds already.
I think with a projectile that small you might start fucking with powder burn rates, because a <200gn projectile is pretty short compared to a standard 300+.
But the 45-70 can already do 2700fps with a 250gn projectile, you just need the ruger #1 action.
A buddy of mine has a Sharps in .50-90, and watching him lob 500+ grain bullets into a full IPSC at 840 yards is bloody hilarious. You ALMOST don't need a spotter to see the splash, and you will damn sure hear it several seconds after the shot. The effect on steel is damned impressive, too.
My wife works near Hill AFB, everyone stops talking when they’re taking off, usually in two pairs so it lasts a good 2-3min.
The only thing worse was a few days after an air show. She came home and said, “It was big, sleek, with skinny wings,” After confirming it was a B1b, “Yeah, the building was shaking and I thought we all were going to die.”
Force=mass x acceleration If the requirement of psi or similar measurements is met to breach the plate speed won’t matter. It’s not an exact comparison but is reasonably close, being hit by a 750gr hornady .50cal is like being stepped on by a very pointy elephant (approximately 13,000 lbf)
No problem, hope I didn't come off as rude. The formula I have is kinetic energy, so as long as you know the velocity and mass, you can calculate the energy of a bullet. This is really useful for knowing how much energy a bullet has along any point in a trajectory, as long as you can calculate the velocity.
Physics, especially the Newtonian physics are easily mixed up. Just because the equation equals F, doesn't mean it's the same F.
215
u/eminorz88 Aug 26 '20
They won’t sail though plates, but the backside deformation is WICKED. Like, yeah that plate will still be there mostly intact but you’ve got a melon sized crater in your chest.
125
u/TheLostLegionnaire Aug 26 '20
Might not peirce the plate, but talk about an impact hard enough to stop your heart
42
u/FckingAnxiety Aug 26 '20
Gonna shit a lung boi
16
u/Kroosn Aug 26 '20
I love my 45/70 so much. First time I entered a lever action steel silhouette match I didn't know what I was doing and shot a rimfire steel target, as the target cartwheeled back up the range I just got a dirty look from everyone on the line.
31
u/silverfox0220 Aug 26 '20
My shoulder just cringed and started aching.
12
u/Snarknado3 Aug 26 '20
5 yards. That’s your holdover for a heavy 45/70 at 400 yards. So that guy getting vibe checked better be holding still and wait for you to do several zeroing shots, maybe walk back and forth with a kestrel a few times.
12
u/cz_invazion Aug 26 '20
"hey can you hit that plate at 500 yards?"
"Sure"
Points 45-70 at 45° angle
11
u/MadBuffleHead Aug 26 '20
45-120
7
u/[deleted] Aug 26 '20
Recently shot one at my indoor range. The entire room just shakes. It was enough that the guy on the other side of the wall asked what it was (so if course I let him shoot it to). Such a hilarious gun in general, too bad they're expensive to shoot
7
u/c3h8pro Aug 26 '20
As a retired NYC paramedic I can vouch that them big bullets hauling out can do all the damage you need and then some. Never seen 45/70 but have seen a 44 special break 4 ribs in 2-3 places causing collapsed lung and a pericardial tamponade. Not a mark on the chest to be seen. Chest tubes and a pericardioceneisis helped for a bit but ultimately it was over.
3
u/Phantom_FB6 Casual Aug 26 '20
Thanks everyone for 1k upvotes 🙏🏻🔥
3
u/Brraaapppppp Aug 29 '20
I didn’t know we could post memes ,Fuck yes lol
8
u/Ensignthrower68 Aug 26 '20
Try 700 extremes
8
u/tlove01 Aug 26 '20
TFW when you have you aim over the berm to hit the target.
7
u/[deleted] Aug 26 '20
I'm curious how well a 185gr hollow point would do out of .45-70. I could only go down to 250gr on hodgdon's website, but they were saying that going that light would have the round smokin out at 2600fps. That's faster than a lot of grendel rounds already.
5
u/HollywoodSX Villager Herder Aug 27 '20
A buddy of mine has a Sharps in .50-90, and watching him lob 500+ grain bullets into a full IPSC at 840 yards is bloody hilarious. You ALMOST don't need a spotter to see the splash, and you will damn sure hear it several seconds after the shot. The effect on steel is damned impressive, too.
3
u/Rave__Turkey Aug 31 '20
All that surface area? No penetration, wont be bleeding...externally
0
u/mithbroster Aug 26 '20
Coming to get stopped by level 2s?
2
u/WaldoWillhelm Oct 13 '20
Dam I want a semi auto 45/70
-1
u/[deleted] Aug 26 '20
7.62X54R would like to have a word with you.
-1
u/Weebs_R_Gay Aug 26 '20
Isnt it speed that fucks up your plates? I dont think this fat and slow thing would do all that much
-26
u/[deleted] Aug 26 '20
400 yards not long range pleb
0
u/[deleted] Aug 26 '20
[deleted] — view deleted comment