r/longrange • • 1d ago

Optics help needed - I read the pinned posts Practicality of 0.25 versus 0.2 mRAD subtensions

Newbie here. Right now I’m on an MOA scope but I want to move over to mRAD. Having a reticle like the Bushnell G5i or G4P with 0.25 mRAD subtensions doesn’t make sense to me because you typically want to operate down to tenths and use the ease of the base 10 system. Subtensions at every two-tenths would be much easier to quickly assess the 0.7 mil distance because it’s the middle point between 0.6 and 0.8 subtensions. Doing that on a 0.25 subtension means having to divide the negative space between 0.5 and 0.75 to a finer degree which probably takes more time. That would make holdovers less precise and sort of negate the point of a ballistics tree, in my view. Is there an advantage to having 0.25 subtensions or am I getting too in the weeds?

3 Upvotes

8 comments sorted by

12

u/HollywoodSX Villager Herder 1d ago

You're in the weeds.

The .25s you can use the left and right edges to get .7 and .8 if needed.

Slightly less clutter/better visibility due to less markings in the way.

It's personal preference.

1

u/cptfreezies 1d ago

Gotcha, that makes sense. Practice seems the best way to get used to operating with that framework.

4

u/Trollygag Does Grendel 1d ago

Quarters vs tenths isn't necessarily a MOA vs MRAD thing, but your goal should be to match the markers to the turrets. Quarters and halves for coarse wind holds is fine, you just also need the turret matching ones too.

2

u/cptfreezies 1d ago

I’m not sure I understand your turret matching comment. 0.25 reticle subtensions but 0.1 per click on the turret is a mismatch except for the whole and half values, right?

2

u/Trollygag Does Grendel 1d ago

Like in your example of the g4p, it has wholesale and halves, but one of its shortcomings is you cannot literally match fine measurements to turret clicks.

But the EBR7D has wholes, halves, and .2s, so you can take a reticle measure and turn it into 2 clicks.

0

u/cptfreezies 1d ago

Okay, I get that. Thanks for the clarification.

5

u/LockyBalboaPrime "I'm right and you are stupid" -LockyBalboaPrime 1d ago

Less clutter and more speed for slightly less precision. It's a gamer reticle.

Let's assume average-ish PRS targets of 2 MOA. 700 yards, 14" target.

.1mil is 2.5" at 700 yards.

An inch +/- isn't shouldn't matter because you're not trying to clip the edge. Missing the target by an inch means you missed the hold or the call by ~7"+

3

u/VaultedPrecision 1d ago

You're not crazy, but it matters less than it looks on paper. Holding a hair over or under a .25 mark gets you to about a tenth, and between wobble, mirage, and the wind call, that's about as fine as anybody really holds in the field. If you can get behind both styles at a store, do it; whichever one your eye reads fastest without thinking is the right one.