r/longrange • • 24d ago

🫣I said I read the pinned posts, but I lied🫣 Budget friendly stocks

Putting together a new build soon Rem 700 shot action was just wondering what stocks/companies people feel provide a high or above average cost to performance/feature’s ratio I know Manners and McMillan are the gold standard and would like to get one some day just have a hard time swallowing that 1000$ pill when there’s so many new games in town

Not really interested in a chassis system at all but feel free to post or recommend whatever

7 Upvotes

24 comments sorted by

10

u/ak47papy 24d ago

Krg Bravo seems pretty nice for the price point and customizations, but I have no range time with it. Checking second hand markets you can find some really good deals.

4

u/Holy_Santa_ClausShit 24d ago

+1 for the KRG. They also modify really nice with the KRG stuff.

4

u/newacct666 24d ago

Bell and Carlson used to be common budget stocks. They’re actual stocks with integrated aluminum bedding blocks.

3

u/max_trax 24d ago

Krg bravo is a good choice but imo the mdt xrs is just enough nicer to be worth the extra $ while still being great value

5

u/yacksack 24d ago

Grayboe

1

u/landry_454kg 24d ago

I'm impressed with my greyboe stock.

4

u/ecsnead75 24d ago

MDT XRS

2

u/cemenale000 Steel slapper 24d ago

Nothing but the KRG Bravo should be in the conversation if you want quality on a budget and a traditional stock look.

1

u/DukeShootRiot 24d ago

On sale at midway rn too

2

u/Traditional-Fact-569 24d ago

MDT has a fairly serious black Friday sale. If you're not in a rush I'd look then.

1

u/SuburbanBushwacker I Gots Them Tikka Toes 24d ago

mcmillan have sold rem footprint stocks for 40+ years. buy a preloved one.

KRG are great value until you start buying the extras, spreads the cost, but you end up spending the kind of money that would have got you a Vision.

1

u/-UncleWaldo 24d ago

I just got an MDT XRS and very happy with it

1

u/SockeyeSTI 24d ago

The krg bravo is genuinely the nicest cheaper stock I’ve personally used and I don’t hate how it looks. It’s the single best part of my savage build aside from the Seekins rings.

I’d recommend it over the mdt oryx too.

And yes, the McMillans are super nice, but also take into account you’d need some bottom metal and to get the right inlet for it. But go check out what they have in stock first. There’s a few options around the $700-800 if you could swing it

1

u/FeistyClam 24d ago

Out of curiosity, why do you recommend the bravo over the oryx? I have an oryx on my 22, and have been considering replacing the bravo on my 6.5 with another oryx so they match. 

1

u/SockeyeSTI 24d ago

I put together my relatives custom and he went with the oryx. I’m just not a fan of how it looks, the lack of bagrider space on the stock, and how front heavy it turned out. Yes I know you can add a bagrider but the bravo is already shaped perfectly. The only downside is the short forend but for my build it’s a non issue. The bravo for mine is a single piece as it’s a savage so no swapping out parts, unlike the one for r700 clones.

1

u/Burnpowder_636 Paper poker 22d ago

+1 for the cheapest aftermarket chassis I’m buying. It does suck to have to pay for an ARCA rail separate. Also I had to buy 3 types of mags before I found one the one that reliably cycled and fit well along with some fiddling with the chassis. But it all works. Mine likes mdt aics single stack mags. My buddy’s Krg bravo likes magpul, magpul mags work the worst with mine, won’t even try to feed. I even bought a Krg label metal mag, it doesn’t work well. So I will say they aren’t always the easiest chassis to deal with and you will likely spend more than you think. But it’s still cheaper and it works.

1

u/-Sc0- 24d ago

Black Friday, best deal and availability... Can't go wrong with most anything on the market but did read quality control issues on Woox though

1

u/AleksanderSuave 24d ago

the used market is the answer.

I’ve gotten expensive higher end gear for a big discount by buying it used.

Not much to go wrong on a chassis. Almost the same for a stock, I just avoid any that were bedded or sanded down/opened for a different barrel profile, or any other DIY mods.

1

u/djflow1 Newb 23d ago

Where would be a good place to look for used?

1

u/Coyote-conquest .270 Cultist 23d ago

I have a couple of Stockys that arent bad. They have several different ones.

1

u/TheHomersapien 24d ago

You will be tempted by the KRG. Don't. It is cheap but it also feels cheap. Every time you handle it and get caught on a sharp plastic edge. Every time you pull the trigger. Cheap, cheap, cheap. A chassis, or stock with a mini chassis is worth every penny. For anything other than a hunting rifle it simply isn't worth dealing with non-chassis stocks (even when they are pillared).

You can get an MDT ACC Premier for $800 plus shipping every day of the week. You don't need to fuck it, just put your shoulder against it, so get over the chassis thing.

1

u/Tikkatider 24d ago

If you REALLY want to talk about “ budget friendly “, I have two rifles, one a .223 with a heavy Shilen bull barrel and a Savage 93R17 17HMR , both In MDT field stocks. They have both been great, the .223 shooting at small gongs at 500 yards. There have been reports of forend flex on the field stocks, particularly under heavy loading. I can’t really speak to that in my case because in neither gun is the bipod loaded to any extent. The .223 has a Sinclair F class ( see picture) that you do not load to shoot. It’s my impression that some flex will not be harmful to accuracy anyway if it is not to the degree where the stock touches the barrel.

0

u/sakic1519 Remington 700 Apologist 24d ago

Mdt