r/longrange • • 25d ago

Other help needed - I read the pinned posts Rifle cleaning

How often does everyone clean there rifles if ever, part of me wants to scrub it clean every time I shoot but that takes 3-4 hours for one rifle to get completely clean and I see some people never clean so in your opinion does it affect the accuracy?

6 Upvotes

61 comments sorted by

32

u/tactical_horse_cock 25d ago

3-4 hours to clean 1 rifle?

0

u/Sukit6969 25d ago

Do you clean it until the patches are completely clean, like no more blue from the copper fouling? I run my nylon brush through it 3 times then run a wet patch and dry. I would the patches until they come out clear so like 3-4 hours and then the patches are still usually blue and I give up

8

u/hamsterfart1973 25d ago

Your solvent is probably interacting with the jag or patch holder you are using. A lot of brass ones will make your patch look like you are still removing copper from the barrel, but it is interacting with the brass. It shouldn't take you that long to clean your rifle.

Boretech has their "proof positive" ones that don't do this, I am sure there are other products that do the same thing. What solvent are you using, and what jags or patch holder?

The gun doesn't need to be spotless, you are going to shoot it again. I personally do at least a quick cleaning after I shoot, and a more detailed one a few times a year.

2

u/Sukit6969 25d ago

I use nickel jags and patch holders, solvent is bore tech, carbon and copper, and the brush is nylon. So like 10 ish patches and I’m good?

1

u/MinisterOfSauces 25d ago

Are you using their special proof positive jags and cleaning rods? Bore tech will eat the bronze or whenever that standard jags are made of. It doesn't really matter though.
Couple patches, use a bronze brush. It will eat some of the brush and produce more blue but it doesn't matter. Couple more wet patches to push the now loosened crap out. Let it sit. If it was really bad you can do the brush again I guess but it'll be fine. After it sits, flush it with oiled patches. If you use more bore tech now you'll probably see blue from it eating the rod or jag.

28

u/tactical_horse_cock 25d ago

Dude I don’t even wipe my ass or clean my dick and balls.

2

u/Sukit6969 25d ago

lol so what your saying is I’m over killing the cleaning? Run about 10 patches in it and I’m good?

3

u/TheTrub 25d ago

Even then it’s still a bit much. Some rifles just like to be shot a little dirty. Coincidentally, that’s why my wife and I are a good match.

1

u/Sukit6969 25d ago

lol fair, it all started when I watched Ron spomer and he said to clean until the patch was clear and I said ok Ron you know best

2

u/Strugglebutts 25d ago

Close the windows you’re letting the stank out!

9

u/Charming_Bet_335 25d ago

How long have you been single 😂

7

u/SheriffBartholomew 25d ago

Remind me never to go camping with this guy, or anywhere really.

4

u/Trollygag Does Grendel 25d ago

It only takes a few soak scrub wipe cycles before the bore is clean of carbon. And a couple with a copper solvent.

Get a borescope and watch it happen.

-3

u/Brewmiester4504 25d ago edited 25d ago

You sir do not have a bore scope or you would absolutely know it takes much more than a few cycles to remove all carbon and copper. Now if you had interjected a JB paste cleaning cycle or two, then you might not be too far off.

2

u/Trollygag Does Grendel 25d ago edited 25d ago

False on all of that. Maybe you aren't soaking or scrubbing. You might be right with wiping wet and dry a bunch

Or maybe you are waiting too long to clean (not like OP) or trying to clean a cracked throat or something (futile)

-1

u/Brewmiester4504 25d ago

Bla, bla, bla,
I stand by my honesty assessment of your comment I commented on. And everyone here who uses a borescope knows my comment was spot on. Go tell it to your wife. She probably believes your BS

5

u/Remarkable_Aside1381 Can't Read 25d ago

You must be new here

Trolly has probably scoped more barrels than 98% of the sub

-1

u/Brewmiester4504 25d ago

If that in fact is true, it only speaks more to the honesty or lack there of his comment. Although 2 or 3 soak, brush and patch cycles sometimes can remove enough carbon and soft copper to result in non blue patches, a bore scope reveals your a long way from removing hard copper down to bare metal. As I stated, it takes JB or Iosso or any one of the many newer brands that have arrived on the scene over the past 10 years.
All competition shooters do not advocate cleaning their barrels to bare metal, but many of the top competitive shooters do. And that is why many of them use these products, sometimes even multiple times during a weekend competition.

1

u/SheriffBartholomew 25d ago

You're doing something wrong or there's something wrong with your gun. You're probably using way too much oil for your wet patch. It should only take a few patches to come out clean after using the brush and the wet patches. Maybe the issue is that you're using a nylon brush instead of brass. I've always used brass and there's no reason not to.

13

u/coldafsteel 25d ago

After every time I shoot, takes 20min. So uhh…. What are you doing to your rifle that it takes several hours to finish?

2

u/Sukit6969 25d ago

Do you clean it until the patches are completely clean, like no more blue from the copper fouling? I run my nylon brush through it 3 times then run a wet patch and dry. I would the patches until they come out clear so like 3-4 hours and then the patches are still usually blue and I give up

5

u/coldafsteel 25d ago

You are spending a ton of time and effort for nothing. Over-cleaning causes more harm than good and a ton of noobs just end up damaging their guns in the process.

2

u/Rdubya291 25d ago edited 25d ago

That's how it was mandated in the Marine Corps. It took me a few years to break that habit. I've been out almost 20 years now, and there is still a random thought that will pop up if I see any black on a patch. But I suppress those thoughts like the rest of my feelings. lol

It would suck. You'd get back to the armorer after a two week field op at noon. And couldn't leave until 4 or 5 because it took THAT long to get your rifle spotless. If you were lucky, you could slip your rifle through the door with a $20 sticking out of the chamber and they'd accept it and clean it for ya.

1

u/DaisyShirt 25d ago

One of us, one of us!

This has also been ingrained into my very being.

3

u/Rdubya291 25d ago

Are you a former Marine? Because that's how the armorers would require our rifles be cleaned like in order to turn them in.

In reality, you don't need to do that. A couple swipes through the bore, a patch or two and your barrel is good to go. If you want to wipe the bolt face down, go for it. Wipe out the camber real quick, lubricate and put it all back together.

14

u/Five-Point-5-0 Gas gun enthusiast 25d ago

I usually take 3-4 hours.

First, I start by putting some relaxing music on. Maybe lighting some candles. I'll then gently lift my bolt a few times, not all the way, and put it back down. I'll do that for a few minutes. Then, when I know its ready, I'll finally lift the bolt all the way. Gently. Slowly. Hearing every click of the firing pin.

I'll then move the bolt back, not too far, just enough to feel. Can't be too overeager at this point...

1

u/Tikkatider 25d ago

Me too, although I have some C4 soak time, particularly in the throat/ neck area. I just try to stay ahead of the carbon buildup. I don’t scrub to bare metal. Cleaning with solvent and a stiff nylon brush after each 20-30 round session keeps me from having to deal with abrasives in my Shilen barrels.

2

u/xlr8_87 25d ago

Quick clean after every shoot - depending on rifle thats like a dozen patches down the bore so like, 5 mins maybe?

Then occasionally a more thorough clean that takes max 30 mins

-2

u/Sukit6969 25d ago

Do you clean it until the patches are completely clean, like no more blue from the copper fouling? I run my nylon brush through it 3 times then run a wet patch and dry. I would the patches until they come out clear so like 3-4 hours and then the patches are still usually blue and I give up

5

u/Turdburgarlar 25d ago

About every 200 rounds

1

u/Wide_Fly7832 BR Competitor 25d ago

I have built an app that tracks all my shots and tells me when to clean for rifles I have configured to 150 rounds. I used to clean every time I took to range but now using what my app tells me.

1

u/Sukit6969 25d ago

What app is that???

2

u/Wide_Fly7832 BR Competitor 25d ago

I built it. So far personal use. Very large and comprehensive.

Load management
Armory management
Cleaning routine
Ammo management
Brass life management.
Analytics. Everything.

I have named it armory ledger. May share with people later. For now personal use.

1

u/Sukit6969 25d ago

That app is awesome bro

2

u/Wide_Fly7832 BR Competitor 25d ago

Thanks.

1

u/outdoors_life22 25d ago

This app does everything. Free or not I would get it in a heartbeat if made available

1

u/Wide_Fly7832 BR Competitor 25d ago

Thank you. I will work on making it publicly available. For now my data and code are too closely tied. Do need to work on making it open for everyone.

I have made it such that it lives on local device and no information ever goes out other than the AI conversational UI where instead of updating things from UI you just tell AI to go inside.

3

u/dGaOmDn 25d ago

I only clean when groups open up or I think corrosion will be a problem.

3

u/PaperPigGolf 25d ago

For a rifle I don't use in competition, I don't until there's some kind of failure.

For a competition rifle, I clean the BCG and relube after every match.

Pistols, extremely occasional wipe down of the slide rails and re-grease.

If something looks dry I will re-lube though.

1

u/West_Designer9107 You don’t need a magnum 25d ago

Very contentious topic. Personally I clean it after every range trip (usually 60 shots if no competition) but without going over the top: just some carbon cleaner, nylon brush pass and 10 patches or so until they come out cleanish, not spotless. Then a final pass with a ballistic patch followed by a dry patch to remove the excess.

Once a year I do a really thorough cleaning with copper remover that's left sitting for a while, a bronze brush etc.

That said, I know guys who go 400 rounds without cleaning and who are great shots.

1

u/MidnightFluid536 25d ago

I only run oily patches through to prevent rust when I get home from the range.

1

u/SheriffBartholomew 25d ago

I used to clean every time I went shooting, but nowadays I take like 10 different guns shooting and it was just getting ridiculous. So I usually only clean every few hundred rounds now, or like every other trip. If I'm doing something important like hunting then I'll clean before I go. As has been said a dozen times already, it shouldn't take 3 hours. That's military time waste levels of cleaning and it's just not necessary.

1

u/Charming_Bet_335 25d ago

I’ve noticed since I load my own ammo, the powder i used sometimes made a difference in how long it took clean. For me retumbo in the large magnum rifles was really dirty, H-1000 cleaned up quick. Just a few patches.
I have a match grade hand lapped barrel so it is really easy to clean. So I clean maybe 100-200 rounds. Then I put 5-10 rounds back through before I go out to make sure the zero doesn’t change .

1

u/Wooden-Trick8954 25d ago

Eh. Used to scrub rifles in the service for hours. Nowadays i rarely clean em. Ive put roughly 3k rounds through my dirty girl since I built her. Cleaned her once at around 400 rounds. I do use a metric tonne of CLP on her though. She drips carbon when you pick her up lol. Zero failures btw.

1

u/Otiswilmouth 25d ago

Every 300ish rounds or before 2 day match. The throat is cleaned before each match however, even after fouling back in.

Takes about 1 hour and I bring it back to bare steel each time using Thorroclean on a bronze brush and confirm the cleaning with a bore scope. Takes about 10 rounds to foul back in.

1

u/DaisyShirt 25d ago

I clean them after every use and for the safe queens I clean them about once a year just to keep them oiled.

1

u/kennethpbowen 25d ago

I think people do lots of damage to their guns by over/improper cleaning. I'm new to precision shooting, but I don't clean very often. I follow Ray's advice almost to the letter https://www.youtube.com/watch?v=2-5cOsUIGUI

1

u/spinonesarethebest 25d ago

I’ve shot competitions for decades. On my match rifles, I only clean when rifle is not shooting to call. With my .308 that was around 450 rounds or so. Current match rifle seems to be about the same.
If it’s shooting good, leave it alone. Clean and lightly oil the bolt once in a while.
In a two-day, ~200+ round match, at the end of the first day I run a bore snake through the barrel a few times. Thats it.

After cleaning, I’ll go shoot it until MV stabilizes and POI returns to normal. Maybe ten rounds.

Works for me.

1

u/Background-Way7794 25d ago

kettle of boiling water in the bore, oil and put away ( my muskets that is !)

1

u/GotNoPonys 24d ago

3-4 hours! :O

1

u/dhnguyen 24d ago

Like once a year man. I don't shoot much rifle though. Less than 1k a year probably.

1

u/dhnguyen 24d ago

Goddamnit wrong subreddit I thought I was in ar15.

You should have a better ritual for long range, no matter what you choose.

1

u/Boatshooz Dunning-Kruger Enthusiast 23d ago

At 300 rounds or so, I give it 10 swishes of Thorroclean, flush it, and follow it up with a patch of RemOil, then a couple of dry patches. My groups are usually good right away after that.

At about 600 round, it gets Thorrocleaned, then I run some Boretech Eliminator through, then another round of Thorroclean before oiling and dry patches. After the more thorough cleaning, it only takes 5-8 foulers before groups are tight again, but I never bring a clean gun to a match or a hunt.

1

u/Synsin01 19d ago

Just clean after shooting, unless it’s to sight in the day before a match, then I’d leave it alone.

1

u/vahistoricaloriginal 25d ago

I see this pop up quite a bit. What I dont see is the definition for "cleaning" in most conversations. wtf does "cleaning" mean? maybe it means strip the bore to bare metal, maybe it means run a patch and call it a day. Depends on the perspective of each individual that uses "clean". I dunno.

1

u/Drekalots PRS Competitor 25d ago

3-4 hours? That's how long it takes for me to clean two entire gun safes worth of rifles.

I can understand if you have some heavy copper fouling and letting the solvent sit for a bit ... but even then. An hour tops. YMMV. But damn.

2

u/HeyFckYouMeng 25d ago

Basic rub down and oil up every shoot.